AGE I CGN 02 24 25 PROVISION OF ALUMINIUM GLASS PARTITION IN BLDG NO P 21 AIR CONDITIONER TO DINGING HALL BAR FOR BETTER COOLING AND TO AVOID OVERLOADING OF EXISTING ACS AT BLDG NO P 57 AT SECTOR 24 NOIDA AT COAST GUARD NOIDA UNDER AGE I CG NOIDA

Amount

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F plain, galvanised MS sheeting of 1.00 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Supply,installation,testing and commisioning of split type air conditioner 1.5 TR capacity having 5 star rating with cordless remote control, single phase, 240 volts,50 Hz complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length (as per site requirement), indoor mounting plate, MS stand for fixing of outdoor unit, drain pipe of suitable size upto plinth (including fixing of conduit pipe of size 20 mm) and Stands for installation of outdoor unit complete all as specified and directed. Make : Haier /Blue Star/ Voltas /LG/Carrier

Supply,installation,testing and commisioning of split type air conditioner 2.0 TR capacity having 5 star rating with cordless remote control, single phase, 240 volts,50 Hz complete with all accessories such as indoor and outdoor units and refrigerant tubing of adequate length (as per site requirement), indoor mounting plate, MS stand for fixing of outdoor unit, drain pipe of suitable size upto plinth (including fixing of conduit pipe of size 20 mm) and Stands for installation of outdoor unit complete all as specified and directed. Make : Haier /Blue Star/ Voltas /LG/Carrier

M&L for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 volts grade, conforming to IS-1536-1977 multi-stranded 4.0 sqmm single core, copper conductor drawn through PVC cashing caping (size as per site requirement) and one runs 4.0 sqmm single core multistanded corpper cunductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed. Note: Two runs of conductor of size 4.0 sqmm with one runs of earth wire 4.0 sqmm and PVC cashing caping will be measured and paid as on unit.

Supply and fixing of sheet metal enclosures Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 to 32 amps,240 V complete all as specified and directed.

S & F Double door Sheet metal enclosures factory made DBs 8 way, 240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.

S&F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of theMCB should be the same as that of DB) for the following :-

MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'B' series

MCB Single pole + Neutral 240 volts, 32 -63 Amps,10 KA Capacity, 'B' series

Sanjay Associates

M/S R.S. Builders