GES/PKT/T-61/2019-20 Certain repair to joinery, flooring, plastering, roofing and sanitary fittings to OTM and MD Accn at Kandrori, Nangal, Damtal and Kaunterpur area under GE (South) Pathankot.

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each incl taking out hold fast complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each incl taking out hold fast complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exc 2 Sqm each complete all as specified and directed.

S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed.

S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed.

S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed.

S&F 35mm thick 2nd class hard wood plain framed factory made glazed and skelton shutters open rebated and prepared to receive glass/ wire gauge etc (without sas bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secring glass,etc size of members of shuters as specified in SSR Part-I,Section 8, clause 8.24 (a) complete all as specified and directed.

S&F Factory made wooden molded panel doors raised high density fiber (HDF) panel doors conforming to IS-15380 but with core of ridge polyurethane Form(PUF) of density 45 Kg/Cum and timber shall be of good quality of density not less than 500 Kg/Cum. The minimum width of the frame shall be 65m and door facing plates (DWF Plates) shall be 3.2mm thick and shall be required to pass the test vide IS-2380 and ISO metnod in EN-120 and boil test as per IS-4020.

S&F factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforcement with MS square tube complete all as specified and directed.

S&F factory made solid PVC door shutter, 28 to 30mm thick (style) with 2,4 or 6 raised panel design with 2mm moulded prelam PVC sheet on on the front face and 2mm plain colour PVC sheet on back face with wood free EPS complete all as specified and directed.

M&L 19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work including wooden lipping fixed in repairs complete all as specified and directed.

S&F Hasp and staple, safety type, aluminum anodised with mold steel hinge pin including bolt to hing plate and fixed with screw of 75mm size complete all as specified and directed.

S&F mild steel, butt hinges 100mm, cold rolled medium weight mild steel complete all as specified and directed.

S&F 150 mm size, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150mm long aluminium tower bolts (ISI Marked) extruded type complete all as specified and directed.

S&F in repair, 300mm, Mild steel spring for door, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed.

S&F 300mm long Mild steel sliding tower bolt plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate complete all as specified and directed.

M&L for Steel windows/vent with tubular frame factory made double rebate with double shutter (wire gauged shutter & glass glazed shutter), of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long including one shop coat of red oxide primer complete all as specified and directed and pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2. (Wire cloth and glass panes shall be measured and paid separately)

S&F Mild steel framed work such as grills, gratings using square/round bar with ends of bars shoulders/welded drilling holes for fixing of guard bars including one shop coat of primer complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass ordinery quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Preparing the new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L preparing wood or wood based new or previously untreated surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces any description including raking out joints hacking for key scrubbing down with water etc complete all as specifed and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Preparing the new plaster surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L Preparing newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer on walls including curing after each coat complete all as specified and directed.

M&L Two coats of dry distemper on walls white or tinted over a coat of primer on newly plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing servicable tiles to store and rubbished off the premises complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:4 complete all as specifed and directed.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:4 complete all as specifed and directed.

M&L Glazed ceramic coloured tiles of size 450mmx300mmx7mm to 8mm thick on vertical surfaces of walls such as skirting, dado etc laid over and including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L vitrified ceramic tiles light shade 10 mm thick ( sq/ rect) polished, area of each tile not exceeding 0.36 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6 complete all as specifed and directed.

M&L vitrified ceramic tiles light shade 10 mm thick ( sq/ rect) polished, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6 complete all as specifed and directed.

Demolition cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L PCC 1:4:8, type D-2, (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete, (as in sunken floor) complete all as specified and directed.

M&L for Doctor fixit Pidifin 2k high performance 2 component flexible Acrylic polymer modify cement base water proofing coating in two coat 1mm thick dry film mixed in ratio 2:1 by weight or 1.5:1 by volume product of M/S Pidilite Industry Limited Makers of Fevicol adhesive brand over and including 10mm thick rendering in cement mortar 1:4 mixed with and including liquid water proofing compound of approved brand complete all as specified and directed.

Taking down steel tubing and connections, incl cleaning for re-fixing or removal, 15 mm bore pipe complete all as specified and directed.

M&L tube med grade with fittings and fixed complete to walls and ceilings or laid in floors,bore of pipe 15mm, complete all as specified and directed.

-ditto- as per srl item 45 above except pipe complete all as specified and directed.

Taking down steel tubing and connections, incl cleaning for re-fixing or removal, 20mm bore pipe complete all as specified and directed.

M&L tube med grade with fittings and fixed complete to walls or laid in floors,bore of pipe 20 mm complete all as specified and directed.

-ditto- as per srl item 48 above except pipe complete all as specified and directed.

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest ( excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' or 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) including fixing bolts and connecting to drain pipe, including seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed.

S&F in repair Vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe.(exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed.

S&F in repair low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern incl flush pipe fixed with inlet valve,float,brackets,PVC connection complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore Cast copper alloy Bib taps, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

S&F in repair Pillar tap brass chromium plated with capstan head screwed down high pressure, with or without lettered Hot or Cold of size 15mm dia complete all as specified and directed.

S&F in repairs 15mm bore, Angle valve fancy type brass chromium plated ISI marked with crutch or butter fly handle high pressure screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 20mm brass ball valvehigh pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specifed and directed.

S&F in repair 20mm bore stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron of pipe or for unoins complete all as specified and directed.

S&F in repairs Grating square fittings of size 150mm of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F in repair PVC (SWR) trap plain with grating including jointing with solvent cement with grating suitable for 100mm dia outlet and jointing to waste pipe in cement concrete type B1 (1:2:4) complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 250 ltr but n. exc. 500 ltr) and removing complete all as specified and directed.

Dismantling water tanks (capacity of tank exc. 500 ltr but n. exc. 1000 ltr) and removing complete all as specified and directed.

S&F in repair Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 500 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethelyne float and fly nuts complete all as specifed and directed.

S&F in repair Rotational moulded polyethelyne water storage tank three layered (cylindrical vertical with closed top hoisted fixed in position all as specified in SSR part-I, capacity of tank 1000 ltr incl inlet and outlet connection 20mm dia and 15mm dia GI pipes medium grade respectively 20mm GI pipe medium grade over flow pipe 15cm long and PTMT valve 20mm high pressure with polyethelyne float and fly nuts complete all as specifed and directed.

S&F in repair 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specifed and directed.

S&F in repair for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes complete all as specifed and directed.

S&F, anodised aluminium door shutter aluminium section weighing 0.55 kg/m and including necessary joining cleats, glazing clips, rubber neoprene packing 2Nos door handles to 150mm size to each shutter, tower bolts 200mm size floor door spring/door closer, 5.5mm thick tinted glass and cyllindrical lock including neospreme lining, hinges, anodised aluminum snap beading screws complete all as specified and directed. Make : Jindal, Indal Hindalco.

S&F in repair anodised aluminium window and ventilator with side hung shutter/fixed type,without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 2 Nos door handles 150mm size to each shutter, tower bolts 150mm size 2Nos each shutter and 2 Nos Alumunium hinges 100mm size to each shutter, 5.5mm thick tinted sheet glass and neospreme lining complete all as specified and directed.

S&F in repair Anodised aluminium frame for doors, window ventilators of any size any type with one or more rebates including joining cleats for fixing etc. complete all as specified.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers,coupligs chromium palted and wastes including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size overall size 915mm x 460mm and bowl size 410mmx330mmx160mm complete all as specifed and directed.

S&F in repairs Brass CP wall/basin mixer with telephonic faucet of dia 15mm for mixing hot & cold water screwed down for iron pipe and fixed complete all as specifed and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheet in roof covering complete all as specifed and directed.

M&L for 6mm thick non asbestos cement, corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type, J-type or cranked hook bolts complete all as specifed and directed.

M&L for non asbestos cement two piece adjustable plain wing ridges 6mm thick fixed with L-type, J-type or cranked hook bolt complete all as specifed and directed.

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 -W (Gde-E- 250) quality-A including one shop coat of primer complete all as specifed and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed.

S& F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed.

S&F in repairs Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site with and including PVC frame complete all as specifed and directed.

S&F in repair mild steel curtain rods 32mm dia pre-laminated synthetic enamel paints of wooden finish fixed with screws complete all as specifed and directed.

Supply only wooden rings for 32mm dia cutain rod complete all as specifed and directed.

S&F in replacement wooden (tunned weathered and mitred) brackets of 1st class hard wood pre polished with French polish and touch wood without hole suitable for 32mmdia rod fixed with screws and gutties in wall complete all as specifed and directed.

All as per item srl item no.81 above herein before but end caps with wall ornament and fixed to curtain rod with screw of design /shape as approved complete all as specifed and directed.

M&L 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of cruded oil by weight of cement including dismantling the existing tiles complete all as specified and directed.

M&L 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of cruded oil by weight of cement but except tiles including dismantling the existing tiles complete all as specified and directed.

Demolition of stone slabs, paver blocks and tiles of any description or thickness in floors/apron laid dry complete all as specified and directed.

S&F machine pressed precast concrete interlocking paver blocks with grey cement and pigment, factory made rubber moulded any shape and size conforming to IS 15658:2006 of 60 mm thickness M35 grade complete all as specified and directed.

M&L for 25 mm thick sand cushioning below paver blocks complete all as specified and directed.

M&L for 20mm to 25mm thick cement concrete tiles of size 20cmx20cm/25cmx25cm/30cm x 30cm machine pressed set and jointed, pointed in neat cement slurry with grey cement and no pigment as in floor laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Dismantiling wall and ceiling board (fibre, pulp, imnsulation etc) or insulation boards/ slabs /blankets any thickness including cover fillets complete all as specifed and directed.

S&F in position suspended false ceiling system using E-grid suspended ceiling grid system. The size of grid shall be 600 x 600mm with GI frame work main runner 38 x 24mm cross tee 25 x 24mm and wall angle 24x24mm, using 9mm thick ceiling panel laminated with PVC film on front face and foil back availavel in due drop texture as per IS-2095, part-I-1996, fixid in the grid of E-grid suspended ceiling grid system duly suspended by 4mm dig GI bar hanger from the purlins of the roof with butter fly clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specifed and directed.

Taking out and cleaning of existing roof treatment of any description completely and washing, rubbing with water and providing 20mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 4% weight of cement, finish fair and even without using extra cement to receive water proofing treatment. ( The rate includes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed by Engr-in-Charge

Providing and laying of water proffing treatment on roof with APP modified prefabricated five layer 3mm thick water proofing membrane, super thermolay of STP ltd with non woven polyester mat reinforcement of 160gsm, weight of membrane @3.6 Kg/Sqm over a solvent based bitumen primer, ShalitexPrimer @0.30 Ltr/Sqm by same manufacturer conforming to IS: 3384-1986. The membrane shall be laid uing butane torch. The end lap should be 100mm and the side lap must be minimum 75mm. The membrane shall be first laid up to the parapet wall junction and then shall be overlaped with another memberane (flashing) with an overlap covering upto a distance of 300mm. In case parapet height is less than upto 500mm, membrane shall be terminated at the top of parapet. All rain water pipes opening shall be suitable sealed with APP membrane. ( The rate uncludes for fillling of crackes in existing roof with cement putty using suitable bonding agent (Shalocrate-42) before laying cement plaster all as directed by Engr-in-Charge

S&F in repair Stainless steel Plate rack 775mmX750mmX 0.6mm thick Cat No SSKPR-314 of Make Blue star (Silver Shine)/ Nirali/Jayana/Neelkanth complete all as specifed and directed.

M&L 18 to 20 mm thick Marble work ( table rubbed and polished) of any type work on cooking platform and like in cement mortor(1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of marble shade complete all as specifed and directed.

S&F in repair waste coupling of PTMT 32mm size half or full threaded (minimum weight 260gms) complete all as specifed and directed.

S&F in repair waste coupling of PTMT 40mm size half or full threaded (minimum weight 270gms) complete all as specifed and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof beams, cantilevers, bressummers, lintels over 1.5 mtr span complete all as specified and directed.

M&L mild steel TMT bars 8mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Second class hard-wood in scantlings clean sawn timber framed and fixed including dismantling the existing timber scantling complete all as specified and directed.

S&F in repair 40mm thick second class hard wood boarding as in floor and skirting planed one side, with butt joints and fixed with nails complete all as specified and directed.

Sch of Credit = 183475.00

Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.

M/s Ashoka Brothers

M/S BANSAL BUILDERS