Miscellaneous Electrical jobs of Republic day celebration in RCF colony

S & I of 100W LED flood light in various locations in RCF trombay township. Make : Polycab/ wipro /pride /Havells/ Philiphs/ Crompton

Supply and laying of 3C X 2.5 sq mm TRS copper cable of reputed makes like finolex, polycab only, connecting the same to source and load as directed by site –in-charge.

Installation of LED flood light (100 to 120 W ) on hiring basis. (Up to 25 fittings from 24/01/2022 to 27/01/2022 . Fittings shall be fixed as per approval and direction of site –in-charge. All wires and cable required shall be in bidder’s scope.

S & I of 5 A plug top of mentioned make.

S & I of 15 A plug top of mentioned make.

Supply and installation of wooden board of size 10" X 12" with 25 A, 30 mA RCBO, two 15/5A plug point (or combination) and 3 numbers 5A plug points with complete connections. Connecting wires shall be of proper colour code. (One plug top of 15A and 5A shall be supplied along with the board. Connection of copper cable mentioned in item no 2 shall be done by party, no extra payment will be made for the same.

Laying or removal of XLPE / PVC cable up to 70 sqmm on ground

Termination of cable (Up to 4CX70 sqmm) with suitable lugs (Bottom lug / normal lug) & gland-with installation of provided ICTPN / SDF.

Termination of cable (4CX185 sqmm - 4CX 300 sqmm ) with suitable lugs (Bottom lug / normal lug) & gland-with installation of provided ICTPN / SDF.

Supply of electrician having wiring license for preventive maintenance and other miscellaneous jobs. Party shall deploy technicians from 20.01.2022 to 27.01.2022 in general shift (2 per day). 1 person per day on 2nd shift from 24/01/2021-to 15/08/2021. Irrespective of the quoted rate, successful bidder has to ensure payment as per statutory minimum wage.

Supply of helper for electrical jobs. Successful bidder shall deploy said man power from 20.01.2022 to 277.01.2022 in general shift (2 per day). 1 person per day on 2nd shift from 13/08/2021-to 15/08/2021. In addition to said requirements, party shall deploy man power as per requirement for jobs like cleaning of fittings, shifting of scraps etc. (From township to scrap yard/other places.)

Transportation arrangement for cable and other electrical materials required from cable yard / township office to sports complex on 14/08/2021 and from sports complex to township office / cable yard on 15.08.2021.

Supply & Fixing of Ceiling Rose / Square box

Dressing job of the cable (By suitable clamp )

Unwanted cable removal (with armor or without armor) of all sizes (Area in and around sports complex)

Hiring of articulator for the street light fittings cleaning job. (Hydra with cage is also acceptable)

Design, Supply and installation of driver for LED borage street light fittings. LED drivers shall be with output of 30W, 30-36V, 0.9 A and input voltage 80-260V, 50 Hz. Installation shall be done by replacing dysfunctional LED drivers. LED driver shall be with proper wires and connectors. Surge protection shall be minimum 5 KVA.

Supplying of class C GI pipe of diameter 40 to 50 mm and fabricating street light poles of height 10ft to 14 ft + 3ft (below the ground). Same shall be suitably bended for aesthetic look depending on site condition and requirement (if directed). If required, welding of cross Pattie of suitable size for fixing flood light fitting shall also be done.

Installation of street light poles fabricated as mentioned above. Installation shall be carried out by keeping at least 3ft of the pole below the ground level. Concreating shall be done for a minimum depth of 3 ft. For better stability a cross GI pipe / MS angle / MS channel of with a minimum length of 2 ft shall be welded

Scraping the existing paint of feeder pillar and frame completely and paint them with suitable primer / read oxide. Feeder pillar specification : Height – up to 1700 mm (without stand ), width- up to 1000 mm, depth:- up to 600 mm.

Spray painting of the feeder pillars by spray painting machine. Colour of the upper portion shall be read and lower portion shall be of black colour. Painting shall be done in two coat. Feeder pillar specification : Height – up to 1700 mm (without stand ), width- up to 1000 mm, depth:- up to 600 mm.

Fabrication of feeder pillar (Including supply of all materials) as per specification mentioned. Detailed specification is attached as Annexure - IV.E Size of the pillar : 1800 mm (l) X 815 mm (b)X 500 mm (D). Bus bars (3P +N) shall be of aluminum with minimum current carrying capacity of 400A. Earthing Bus Bar shall be of 200 A. F.P shall have the provision for 1 incoming (3P + N) and 4 out going. FP shall have Siemens type lock in arrangement. Detailed specification is attached. Bidder shall also provide aluminum bus bar of 400A rating in Z shape to connect fuse base with cable. (15 nos)

Fabrication of suitable stand (Including supply of all required materials) for above said feeder pillar from MS channel. Approximate height of stand shall be 800 mm. Fabricated stand shall be painted as per applicale standerds.

Concreate grouting of above mentioned stand. Grouting shall be done by keeping atleast 600 mm below the ground.

Supply, install and commission of 160A Dough mold compound fuse base in above said FP. Above mentioned Z shaped Al busbar shall also be connected. Detailed specification is attached. Fuse base shall be suitable for Size 0 HN fuses.

Supply, install and commission of 400 A Dough mold compound fuse base in above said FP. Above mentioned Z shaped Al busbar shall also be connected. Detailed specification is attached. Fuse base shall be suitable for Size I HN fuses

Welder with welding machine

Supply of L&T HN fuse of 250A, size I

Supply of L&T HN fuse of 125A, size 00

Erection of pipe earting including supply of C- class GI pipe as mentioned ( Minimum length of 1000 mm, diameter of 25mm, c class GI pipe). Errected pipe shall be connected to installed feeder piller with GI strip 25mm X3mm

Supply of OKS 2621 T CONTACT CLEANER - 500 ML MAKE : OKS SPECILITY LUBRICANTS(INDIA) P.LTD

Supply of RUST REMOVER IN AEROSOL SPRAY CAN OF SIZE 400 ML. MAKE:'WD-40'

APPLE ENGINEERING CORPORATION

amar enterprises

ELECTROVIN ENGINEERING CO