REPAIRS REPLACEMENT OF INTERNAL PLUMBING SANITARY FITTINGS TILING AND JOINERY WORK TO D TYPE E TYPE and DIRECTOR ENCLAVE AT DRDO COMPLEX PHASE I C V RAMAN NAGAR BENGALURU

Amount

Taking down chowkates or frame without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkates / frame without taking off shutter exc 1.50 Sqm n.exc 4 Sqm each. complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each

S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes, as per specifications and drawing complete or as directed by Engineer-In-Charge.

S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail& bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification.

Repair/Rescuing, easing and adjusting wooden door shutter of any description without taking off shutter from the frame, area of shutter exceeding 1.00 Sqm but not exceeding 2.00 Sqm each, including making good the disturbed area as per existing, complete all as specified and directed.

Repair to steel window/ventilator/shutter of any description including replacement of handle of any pattern, peg stay etc to make window/ventilator absoulity working condition including necessary welding area note exc 0.50 Sqm each including re-securing or easing and adjusting all as specified and as directed by Engineer-in-Charge.

Supply and fix, Pressed steel door frame of size 105 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Supply and fix, Pressed steel door frame of size 125 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.

Supply and fix 35 mm thick plain framed paneled factory made shutters (two panel) with II nd class hardwood rail and style with lock rail and panel of 12 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix, 35 mm thick Factory made Second class hardwood Glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.

Taking down boards of any description and any size as in shelves complete all as specified and directed.

18/19mm thick one side prelaminated particle board, interior grade, with decorative choice laminate and fixed with screws to steel/timber frame work etc complete all as specified and directed

supply and fix 18/19 mm thick veneered decorative plywood, Grade 1 (with BWR resin) with decorative face veneers on one side and other side balancing white face fixed with screws to timber frame work complete all as specified and as directed.

All as per item no 15 above but 12mm thick

.All as per iten no 15 aboce but 09 mm thick.

Supply and fix, teak wood beading of size 20mm x 6mm on the exposed edges/surfaces of the particle board complete all as specified and as directed.

Supply and fix in repairs, 100 mm long fancy type stainless steel handles and fixing with screws complete all as specified and as directed.

Supply and fix in repairs, mild steel 40 mm dia cupboard knobs, fixed with nut, screws, washers, bright finished, complete all as specified and as directed.

Supply and fix in repairs, stainless steel soft closing hinges, suitable for modular kitchen complete all as specified and as directed. (Make : Godrej or techno commercial equivalent).

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame not exceeding 0.6 Sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Taking down unserviceable steel windows with frame without taking of shutter (double leaf/triple leaf shutter with frame i.e. fly proof and glazed) from the frame exceeding 0.50 Sq m and not exceeding 3 sq m each except grill, including glass panes, mosquito proof mesh complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F Framed works such as grills, gratings, etc and hung as gates including pintle hinges,stops hand made sliding bolts etc with end bars shouldered and /or riveted, or forged into spikes,framed guard bars, barred iron doors, ladders,framed balusters,walk ways,railings,frame work of water tanks and similar work con-forming to Fe-290 Gde -E-165 complete all as specified and as directed.

M and L for framed works such as steel gates, door inclufing pintol hings ,stops hand made sliding bolts etc. complete all as specified and as directed.

M & L, mild steel, plain black sheet 1.6 mm thick, as in gates and similar work, cut to size, fixed to steel framing gates with 40 mm lap joint, welded or riveted, complete all as specified and as directed.

S & F Powder coated aluminium frame/shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for sliding etc. complete all as specified Note :-1. For payment purpose weight of aluminium section shall be only measured. 2. Cost of aluminum mongry, lock, rubber packing, roller for sliding are included in the quoted rate. 3. Sheet glass and wire gauge shall be measured and paid separately.

Hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips

S & F 4mm thick sheet glass ordinary quality and glazing with oil putty, or beading and necessary clips as squares n exc. 0.5 Sqm in each pane complete all as specified and directed.

S & F 4mm thick pin head glass and glazing with oil putty, or beading and necessary clips as square n exc. 0.5 Sqm in each pane complete all as specified and directed.

Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of previously untreated or new wooden surfaces exc 10 cm in width or girth complete all as specified and as directed.

M&L two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and as directed..

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.

Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.

Supply and fix SS butt hinges medium weight of size 100 mm complete all as specified and as directed.

S & F aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long all as specified and as directed.

S & F door stopper of rubber and aluminium alloy body, 150 mm size fixed all as specified and as directed.

S & F in repair door stopper of rubber and aluminium alloy body, 150 mm size fixed all as specified and as directed.

S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm

S&F in repair Single action spring hinges, mild steel with steel wire spring, stove enameled black, 100mm size including necessary welding fixed in repair to steel door frame complete all as specified and directed.

Supply and fix in repairs, Magnetic ball catches of standard type fixed complete all as specified and as directed.

Demolition of brick work or stone/boulder PCC black masonry, built in cement mortar etc and removing debris outside MD Land complete all as specified.

M and L precast cement concrete block masonry with solid block type C1 ,1:3:6 mix (using 20 mm graded aggregate ), exc 10 cm width anf setting in cemect motor 1:6 complete all as specified and as directed.

Taking down cement plaster of any thickness on brick,concrete or stone walls,partitions,ceilings etc including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.

M&L for 5mm thick rendering on ceilings in cement mortar 1:3 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for 10mm thick rendering on brick or concrete surface in cement mortar 1:6 and finishing the surface with even and smooth without using extra cement all as specified and as directed.

M&L for 15mm thick rendering on brick or concrete surface in cement mortar 1:4 and finishing the surface fair and even and complete all as specified and as directed. Note : WPC will be measured and paid separately.

Preparing the newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali reistant primer over 1.00mm thick wall are cputy complete all as specified and directed.

Preparing the newly plastered surfaces of ceilings and applying two coats of oil bound distemper over alkali-resistant primer and 1.00mm thick wall putty complete all as specified and directed.

Preparation of newly plastered sufaces of walls and applying two coats of weather-proof antifungal exterior emulsion paint over a coat of alkali resistant primer, complete all as specified and directed. height uptp 15.0 Mtr rate including including scaffolding complete all as specified and as directed

Taking down steel water tubing 15mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

S&F for GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Taking down steel water tubing 20mm dia bore and connection concealed / fixed on wall under floor and removed from site all as specified and as directed. (Note (i) Taking down stop cock , bib taps and concealed tubing shall be measured and paid separately (ii) Cutting chases and making good will be measured and paid separately

S&F for GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Refixing 20mm bore water tubing surface/concealed in same/new location after cleaning and application of bituminous paint on concealed portion of tubing including cutting & threading pipe and provision of additional fittings such as socket, tee, elbow, union (if required) complete all as specified and directed. Note : i) Taps, valves if any shall be removed before taking down pipe. ii) Cutting chases and making good shall be measured and paid separately

Cutting chases pinning in making good for brick walls to facing where required and pointing in cement mortor 1:3 to ends or edges of concealed water tubing and similar work including making good cutting not exc 10CM girth.complete all as specified and directed.

Supply and fix in repairs, Chromium plated, Wall mixer with bend pipe for overhead shower, built-in non return valve with CP wall flanges, fixed in repair complete all as specified and directed by GE .make as per Cat Part No. F2006402 of Jaquar or techno commercially equivalent model in other makes as approved by GE.

S & F in repair 15 mm CP cast copper alloy bib taps fancy type screwed down, screwed for iron pipe or for brass ferrule including taking down old bib taps complete all as specified and as directed.

S & F in repair fancy type chromium plated 2 way bib tap 15mm dia with CP flange as all as specified and as directed.

S & F 15 mm pillar taps, cast copper alloy fancy type , chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe including taking down old pillar taps complete all as specified and as directed.

S & F in repairs CP fancy type angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

M & L gun metal, globe or gate valves 20 mm bore with iron wheel head screwed both ends for iron pipe and fixed including cutting the old pipes in repair complete all as specified and as directed.

Supply and fix in repairs, Chromium Plated overhead shower rose of size 125 mm dia with swivel joints, over head shower arm of 230 mm long with wall flange, complete all as specified and as directed by GE. .

Supply and fix in repairs, brass chromium plated, fancy type, soap dish ,with wall hook complete all as specified and directed.

Supply and fix in repairs, stainless steel toilet paper holder with flap guard, fixed to wall with CP brass screws and PVC cleat complete all as specified and as directed. By GE.

S&F in repair CP towel rake 600mm dia Fixed with chromium plated screw and PVC cleat fixed in repair etc complete all as specified and directed.

Supply and fix in repairs hand shower( Health faucet) with 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), fixed in position to wall ,fixed in repair complete all as specified and directed by GE.

Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directe

Supply and fix in repairs, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer complete all as specified and as directed.

S&F Vitreous china white wash down water closet pan (pedestal pattern) with PP soft closing seat cover, hinges, fixing accessories set (excluding flushing cistern and flush pipe), including UPVC (SWR) ‘P’ or ‘S’ trap and connection to drain (or outgoing pipe) and to flush pipe, antisyphonic pipe fixed in repair including dismantling existing water closet etc complete all as specified and directed by GE”

S&F Vitreous china White Squatting Orissa Pattern pan of size 580x440mm, including UPVC ‘P’ or ‘S’ trap, front or back inlet and integral foot rests and making connection to trap and to flushing pipe, anti syphonic pipe, fixed in repair including dismantling existing squatting pan and making good to disturbed floor, complete all as specified and directed. Make : Cat part No CALINA S3010102 of CERA or techno-commercial equivalent model in other makes as approved

S&F in repairs 10 ltrs capacity (PVC), valve less, syphonic action type, fluhsing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed

S& F Vitreous China wash basin, white, flat back, size 550x400mm excluding waste, chain and plug and porcelain stopper but including brackets, including Waste coupling of PTMT(half or full threaded) (Minimumweight 32mm-45gms/40mm-60 gms) with 32mm bore PVC waste pipe minimum 800mm long with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repairs complete all as specified and as directed.

S & F in repair stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 160 mm including taking down old steel sink all as specified and as directed.

S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 600mm x800mm complete all as specified and as directed. Make: Blue star or equivalent

S & F rotational moulded polyethylene water storage tanks three layered (cylindrical, vertical with closed top ) hoisted and fixed in position of 1000 Ltrs capacity including taking down old one all as specified and as directed.

750 Ltrs capacity rotational moulded polytheline water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including dismentling of unserviceable tank

500 Ltrs capacity rotational moulded polytheline water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including dismentling of unserviceable tank

Uprooting shrubs / plant /flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. (Note : The height of walls is up to 16 m, necessary cost of scaffolding shall deemed to be included in quoted rate.)

S&F in repair Corner glass self assembly consisting of 5.5mm thick sheet glass self 25cm wide with chromium plated bracket guard and fixed with CP screws and wood cleats with wall complete all as specified and directed.

Supply and fix in repairs, Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long and fixed with CP screws and woof cleats with wall complete all as specified and as directed.

S & F (SWR) UPVC pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed..

S & F (SWR) UPVC pipes 75mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil waste/vent pipes including taking up or down existing PVC pipes and connections complete all as specified and as directed.

Supply and fix in repairs, 32 mm dia, PVC waste pipe of length not less than 800 mm, complete all as specified and as directed.

Supply and fix in repairs, Chromium plated grating, 100 mm dia, including fixing with white cement complete all as specified and as directed.

S&F in repair PVC floor trap/Nanhi Trap with plain/single hole CP grating including jointing to waste pipe in cement joint, of outlet 75 mm.dia .

S & F 75mm dia outlet PVC multi floor trap with CP grating including dismantling the damaged trap all as specified and as directed.

Supply and fix , PVC (SWR) bends any radius 75 mm dia bore including taking down old bends complete all as specified and as directed.

Supply and fix in repairs, PVC (SWR) branch piece single T equal of bore 75mm dia with access door, including taking down old branches all as specified and as directed.

Supply and fix in repairs, PVC (SWR) branch piece single T equal or unequal 110mm dia with access door, including taking down old branches all as specified and as directed.

Supply and fix PVC (SWR) vent cowl of bore 110 mm dia, including taking down old PVC vent cowl complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:4:8), type D2, using 40 mm graded stone aggregates as in sub base of paving / plinth ,hard standing protection.

Material and labour, for 25 mm thick Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in floor finishings, finishing the surfaces rough and even to receive screed bed / bedding layer complete all as specified and as directed.

Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C1, using 20 mm graded stone aggregates as in paving / plinth protection, laid in panels, finishing the surfaces even and fair, joints shall be filled with mastic filling in 1:3 (bitumen and sand) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.

Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.

Material and labour, for 15 mm thick rendering in CM 1:3 including mixing approved water proofing compound on fair faces of brick or concrete surfaces, finishing surfaces fair and even and providing 1 mm thick Brushbond RFX (two component acrylic polymer modified cementious coating consisting of Brushbond RFX powder and Nitobond BBX acrylic emulsion grey in colour of Make FOSROC) using stiff brush roller or trowel to obtain desired thickness complete all as per manufacturer's instructions, as specified and as directed.

Supply only liquid water proofing compound all as specified and as directed.

Material and labour for Plain Cement Concrete (1:5:10) type E2, (using 40 mm graded stone aggregate) 75 mm thick ,as in sub base of the sunken floor, complete all as specified and as directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm, as in floor set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match colour of tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and as directed.

S & F glazed ceramic coloured printed tiles of size 450 x 300X 7mm as in dado set and jointed in neat cement slurry & pointed in white cement mixed with pigment to match with color of tiles over and including 10 mm thick rendering in cement motor 1:3 all as specified and as directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.

M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering in CM (1:3) complete all as specfied and directed.

Material and labour, for Vitrified tiles flooring with Light shade 10 mm thick (Square / rectangular), tiles, area of each tile exceeding 0.18 sq m but not exceeding 0.36 sq m, set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Material and labour, for Vitrified tile, skirting/dado, light shade with 8-10 mm thick tiles of area of each tile exceeding 0.18 sq m but not exceeding 0.36 sq m, on vertical rates as in skirting, dado, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including backing coat of 10 mm thick CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors , aprons etc laid ,bedded and pointed in any motor and removing debris outside MD land complete all as specified.

material and labour, for 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15mm thick in CM (1:4), complete all as specified and as directed.

S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors and cut and polished laid ande over and including 15mm Screed in CM 1:6 including including taking old tiles all as specified and as directed. Make :- M/S Nitco tiles, M/S Bharat tiles or its equvilent.

S&F in repairs PVC Mirror cabinet of size 350 x 450 mm complete all as specified and as directed. Make: Prayag or equivalent

Supply and fix in repairs, 100 mm size Mortice rim lock (4 lever), vertical type,brass body including handles doors including screwing and fixing complete all as specified and as directed.

Supply and fix tubular curtain rail, stainless steel anodized 20mm dia including taking down old unserviceable rod/rail complete all as specified and as directed.

Supply and fix stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks for curtain rod of 20mm dia, decorative type fixed with steel screws and PVC cleats including taking down old unserviceable brackets complete all as specified and as directed.

M & L in repairs drawer channel of length 0.50 m for modular kitchen

M& L in repairs for post box lock with 2 set of key

M AND V ENTERPRISES

S.R.V.Builders

TECKXPERT ENTERPRISES

B5BUILDING SOLUTIONS

ARCHANA CONSTRUCTION CO

Swarna Constructions

Lucky Enterprises