SPL REPAIR TO BLDG NO P-24, P-67 (A) AND P-68(A), MALPUR PUMP HOUSE AND OTHER ALLIED WORKS WITHIN AOR OF AGE BR-I AT AKHNOOR MIL STN UNDER GE (SOUTH) AKHNOOR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed .

Dismantling asbestos cement corrugated,semi-corrugated ,etc roof coverings including ridge ,complete all specified and directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of cement concrete(reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and precast concrete articles ,complete all specified and directed.

Taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.,complete all specified and directed.

Supply and fixing in replacement precast cement concrete M-15 (1:2:4), type B-0 (using 12.50mm graded crushed stone aggregates) as in louvres and jallies, 25mm thick (measured solid), including all mouldings including frame, set in cement mortar 1:4, fixing in repairs, complete all as specified and as directed

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth , for manhole,pipe line,cables, foundation etc not exceeding 10.00 sqm on plan and getting out in any type of soil,complete all as specified and as directed .

Excavating in post holes (or imilar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil, complete all as specified.

Returning filling including spreading levelling watering and well ramming in layers n.exc 25cm in soil, complete all as specified and as directed .

Removing excavated material (soils) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and as directed .

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws ,complete all specified and directed.

Demolition and breaking up drain pipes (Salt glazed ware, CI,AC or Reinforced concrete) of 150mm internal dia, set in cement mortar, complete all as specified and as directed

M&L for concrete bed to 150 mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, in plain cement concrete 1:4:8, type D-2, using 40 mm graded crushed stone aggregates including necessary formwork , complete all as specified and as directed

Supply and laying 150 mm bore salt-glazed stoneware drain pipes, Grade "A" laid in trenches and jointed, complete all as specified and as directed .

S&F PVC (SWR) pipes, 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, single socketed, in any length with rubber ring joints, fixed on wall with mild steel/ PVC clamps, fixing in repairs, complete all as specified and as directed.

S&F in repair PVC (SWR) bends of 110mm bore, pressure capacity not less than 4.50 Kgf/Sqcm, any radius, fixing with adhesive, complete all as specified and as directed .

M&L for machine cut kota stone slab flooring 16-18 mm thick over 20 mm thick cement mortar 1:6 screed bed laid and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete with machine all as specified as on stair shelves etc, complete all as specified and as directed .

M&L for machine cut kota stone slab as in riser,skirting,dado and pillars 16-18 mm thick over 15 mm thick cement mortar 1:4 back plastering and jointing with grey cement slurry mixed with pigment including rubbing and mirror polishing complete with machine , complete all as specified and as directed .

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in hold fasts,copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork , complete all as specified and as directed.

M&L for plain cement concrete nominal mix 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

M&L for providing precast cement concrete 1:2:4, type B-1 using 20 mm graded crushed stone aggregates as in cover slabs for manholes etc, set in cements mortar 1:6, including necessary formwork , complete all as specified and as directed.

S&F TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.,complete all as specified and as directed.

S&F in repair curtain rod, 20 mm dia stainless steel fixed with brakets,stops,rollers etc , complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base finished even and fair including necessary formwork , complete all as specified and as directed .

M&L for machine pressed precast concrete interlocking paver block of any size and shape confirming to IS 15658-2006 of 60mm thickness M-35 grade,including 25mm sand cushioning ,complete all as specified and as directed

M&L for 25 mm thick plain cement concrete 1:2:4 type B-2 using 20 mm graded crushed stone aggregates as in sub bases of floors and pavings etc.including necessary formwork ,complete all as specified and as directed.

M&L for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm with or without facia and finished with cement mortar 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes(Apex) to match with the existing surfaces at any height complete. (Note:cost of welded mesh to deemed to be included in quoted rates)

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 ,complete all as specified and as directed .

S&F tubes, 'medium grade' galvanised, 15mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors including taking down existing tubing, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

S&F tubes, 'medium grade' galvanised, 20mm bore, ISI marked with all fitting such as bends, tees, elbows, unions, short pieces, connectors, back nuts, etc and fixed complete to walls and ceilings or laid in floors including taking down existing tubing, complete all as specified and as directed. Note: Cost of cutting/ chasing for pipe line making concealed in surfaces shall be deemed included in quoted rates.

M&L for rendering 5mm thick in cement mortar 1:3 on ceiling of on concrete surfaces, finishing the surface even & smooth without using extra cement,complete all as specified and as directed .

Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces using water proofing compound , finishing the surface even & smooth without using extra cement, complete all as specified and as directed . Note:- Cost of Water proofing compound shall be deemed to included in quoted rate.

Rendering 10 mm thick in cement mortar 1:6 on any surfaces of brick work, finishing the surface even & smooth without using extra cement,complete all as specified and as directed .

S&F in repair cast iron floor trap, with grating of 75mm outlet dia including jointing to waste pipe fixed in plain cement concrete, M-15(1:2:4), type B-1 (using 20mm graded crushed stone aggregates), complete all as specified and as directed by Engineer-In-Charge

S&F in repair cast iron sand cast soil, waste and vent pipes, 75mm bore, in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.

S & F in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long with brackets, complete all as specified and as directed.

S&F 15 mm bore CP bib taps , fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified and as directed.

S&F in repair stainless steel towel rail chromium plated 20mm dia 'D' type 60 cm long between flanges, ISI marked , complete all as specified and as directed.

M & L for non skid designer ceramic coloured tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4,complete all specified and directed.

M & L for non skid designer ceramic coloured tiles area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm 7 to 8 mm mm thick, set and jointed in neat cement slurry (3 Kg cement per Sqm) and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:4,complete all specified and directed.

M&L Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles over 10 mm thick rendering in cement mortar 1:4 on other than fair faces of brick work ,complete all as specifed and directed.

S& F in repair for vitreous china squatting pan, Orissa pattern of size 580x440 mm white with integral foot rest ,including provision of lime concrete bedding (excluding flushing cistern anf flush pipe) ,complete all as specifed and directed.

S&F in repair PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flush pipe 32mm dia ,capacity 10 litres and making good to dismantled/ damaged floor/ surfaces, complete all as specified and as directed .

S&F in repair Vitreous China urinals, half stall with grating and union for discharge pipe including waste coupling 32 mm bore and PVC waste pipe 32 mm bore complete, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe , complete all as specified and as directed.

S&F in repair vitreous china wash basin, white, flat back, size 550 x 400 mm,including brackets,centre hole mixer tap, waste coupling 32 mm bore and PVC waste pipe 32 mm bore and pedastel , complete all as specified and as directed.

S&F 15mm dia angle valve in repair brass chromium plated screwed down, high pressure with crutch or butterfly handle screw both end for iron pipe or union, complete all as specified and as directed.

Supply and fixing in repair low density PVC connection commercial quality 450mm long including PTMT nuts at both sides of 15 mm bore , complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 15mm bore pipe, complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for 20mm bore pipe, complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tank of 500 Litres capacity, (cylindrical vertical tanks with closed top)(White in Colour and three layered) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including float valve 20/25mm and taking down existing tank , complete all as specified and as directed.

Taking down chowkat or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down chowkat or frame not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames),complete all specified and directed.

Taking down shutters exceeding 1.00 sqm but not exceeding 2.00 sqm each,complete all specified and directed.

S&F pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. ,complete all specified and directed.

S&F 35 mm thick 2nd class hard wood glazed shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted wifth cut and mitred beads for securing glass, gauge etc, sizes of members of shutters as specified in SSR Part I, Sec-8, clause 8.24(a), complete all as specified and directed.

S&F factory made steel window/Ventilator, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter with wire mesh and glass sheet 3.0mm thick, 4mm thick frosted glass jointed internally and made with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as shown in drawing No- CEUZ/TD/1517/15, sheet No- 1/3 to 3/3. Note :- Cost of all items/elements eleborated in the specification and in Drawing shall be deemed to inlcude in quoted rate.

M&L for mild steel square bar framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; staging for of water tanks, cooler stand and similar work conforming to Fe-290, Gde-E-165, including cutting and welding, complete all as specified and as directed by Engineer-In-Charge.

S&F 40 mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat ,complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing opening as per specification and drawing, including making good disturbed surfaces of wall ,complete all as specified and as directed .

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struk inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointing together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR ,complete all as specified and as directed .

S&F 100 mm long mild steel butt hinge, medium weight cold rolled and fixed , complete all as specified and as directed.

S&F150 mm long Extruded aluminium alloy handle, cast type, anodised ISI marked , complete all as specified and as directed.

S&F 150 mm long aluminium, anodised, barrel tower bolt of extruded section ISI marked , complete all as specified and as directed.

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed , complete all as specified and as directed.

S&F mild steel spring for doors, 300mm, ordinary rat tail rod pattern springs including roller and roller plate, ISI marked, complete all as specified and as directed.

S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring, ISI marked fixed in bottom body of door complete all as specified and directed.

S & F Marble(of any type) work (table rubbed and polished ) 15-18 mm thick ,as in steps,jambs,pillars,window/ventilation -cills,cooking platform,urinal partition and like including screed bed or rendering as required in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed.

M&L for 50mm thick, plain cement concrete M-10(1:3:6), type C-1 (using 20mm graded crushed stone aggregate), as in plinth protection and providing the joints throughout the thickness, filled with mastic filling comprising bitumen 85/25 grade and sand mixture 1:3 by weight,including necessary formwork , complete all as specified and as directed.

Dismantling of old/ damaged existing roof treatment with concrete and cleaning all waste and dirt by wire mesh, picking, sweeping and washing down with water to remove dust, etc, and removal of all material out side the cantt area, complete all as specified and as directed .

Dismantling of old/ damaged existing roof treatment with concrete and cleaning all waste and dirt by wire mesh, picking, sweeping and washing down with water to remove dust, etc, and removal of all material out side the cantt and applying one coat of neat cement slurry with 3.0 Kg of cement per Sqm on cleaned surfaces of roof, evenly, and screed bed/rendering 10mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra lime or cement) including Water proofing treatment on roof top with APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, minimum weight not less than 3.0 Kg/ Sqm, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film, laid over one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm and one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof, overlap should be not less than 150mm at ends and 75mm at sides, joints and overlaps uniformly bounded with LPG torch flame including applying of one coat of semi hot blown bitumen of 85/25 grade, @1.20 Kg Sqm and fine screened sand in dry condition @0.50 Kg/ Sqm after laying the membrane and lincluding Precast machine pressed factory made PCC tiles, size 300x300mm and 20mm thick, with grey cement and no pigment, pointed in cement mortar 1:3 and laid over 15mm thick bedding layer in cement mortar 1:4 mixed with creosote oil @5% by weight of cement, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of water proofing chemical shall be included in quoted rate.

Dismantling of old/ damaged existing roof treatment with concrete and cleaning all waste and dirt by wire mesh, picking, sweeping and washing down with water to remove dust, etc, and removal of all material out side the cantt and applying one coat of neat cement slurry with 3.0 Kg of cement per Sqm on cleaned surfaces of roof, evenly, and screed bed/rendering 10mm thick on fair faces of brick work or concrete surfaces, in cement mortar 1:4, including mixing water proofing compound @ 3% by weight in cement, rendering is to be finished even and smooth (without using extra lime or cement) including Water proofing treatment on roof top with APP (Ataxic Poly Propylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density polyethylene film, minimum weight not less than 3.0 Kg/ Sqm, centre core is sandwiched on both sides by high quality polymeric mix with properties of high softening point, high heat resistance and cold resistivity to make it ideal for all water proofing treatment, with polymeric mix protection on both sides with 20 micron HMHDPE film, laid over one coat of bituminous primer conforming to IS: 3384, applied @0.40 Kg/ Sqm and one coat of hot blown bitumen of 85/25 grade, conforming to IS:702, applied @1.20Kg/ Sqm on prepared surfaces of roof, overlap should be not less than 150mm at ends and 75mm at sides, joints and overlaps uniformly bounded with LPG torch flame including applying of one coat of semi hot blown bitumen of 85/25 grade, @1.20 Kg Sqm and fine screened sand in dry condition @0.50 Kg/ Sqm after laying the membrane and applying two coats of aluminium paint, complete all as specified and as directed by Engineer-In-Charge. Note: Cost of water proofing chemical shall be included in quoted rate.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint over priming plastered and other surfaces with alkalie resistant priming paint , complete all as specified and as directed.

M &L for preparation of old surfaces of ceiling, plastered or unplastered including brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and directed

Preparing newly plastered or unplastered surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.

M&L preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash ,complete all as specified and directed.

M&L preparation of old plastered or unplastered surfaces of walls and applying two coats of white wash ,complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over one coat of white primer, complete all as specified and as directed .

M&L for preparation of newly plastered wall surfaces, applying two coats of Emulsion paint over one coat of alkali resistant primer, complete all as specified and as directed .

M&L for complete removal of existing treatment from old decorated surfaces of wall and applying two coats of cement base paint over alkali resistant primer, complete all as specified and as directed.

Cutting and removing as required height of bottom side of existing steel door/gate for proper clearance of floor/ground and necessary welding to bottom rail to fnish the door /gate, complete all as specified and as directed by Engineer-In-Charge. Note : Complete materials and T&P required for the above specification shall deem to have been included in the quoted rate and nothing shall be paid extra on this account.

Taking down carefully existing rolling shutter and cleaning of all the ball bearings with necessary replacement of damaged ball bearings and locking arrangements and re-fixing the same with necessary greasing and one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-In-Charge. Note : Cost of Complete materials required for the above specification shall deem to have been included in the quoted rate and nothing shall be paid extra on this account.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10cm width or girth including preparation of new and old untreated surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of zinc chrome/red oxide primer including preparation of new or previously untreated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M&L for applying one coat of synthetic enamel paint including preparation of old or previously treated steel surfaces over 10 cm in width or girth , complete all as specified and as directed.

M&L for complete removal of exiting treatment from old plastered wall surfaces, applying two coats of Emulsion paint , complete all as specified and as directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, etc.and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.to match with existing surface ,colour ,shade with putty and white cement for smooh finishing of holes ,small patches etc, complete all as specified and as directed .

Material and labour for point wiring (IN NEW CONCEALED CONDUITS TO SURFACES) complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed,multistranded,single core,copper conductor cable 1100 volts grade colour code drawn through and including PVC conduit 20 mm dia medium grade (MMS) including cutting, chasing work at any height and all accessories to be concealed in walls/roofs/floors/ceiling etc. flush mounting MS box with top,bottom,side/back wall, knockout for conduit with entry from any direction made out of 1.20 mm thick suitable for fixing of housing of switch module for switch,socket,fan regulator,red colour indicator, blank plate etc as approved coloures including 1.5 Sqmm PVC insulated multistranded FRLS type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly,complete all as specified and directed for the following:- (Note:- All necessary accessories such as box,top cover, plate, blank plate,MS box,screws,washers and all electrical fixtures are to be used of same make/brand only , the rates of above accessories are deemed to be included in qouted rates)

(a) One light point/fan point/ exhaust fan point/ bell point controlled by one switch ,complete all as specified and as directed .

(b) One 5 pin 6 amps socket point controlled by one 6 amps switch on same board ,complete all as specified and as directed .

(c) One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board ,complete all as specified and as directed .

Description all as per item No 91.00 above, but point wiring with 2.50 sqmm and earth conductor of size 2.50 sqmm complete all as specified and directed but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board complete all as specified and directed .

Supply and fixing switch socket ,modular type,3-pin, 16-Amps ,complete all as specified and as directed .

Supply and fixing switch piano ,one way,modular 6-Amps, complete all as specified and as directed .

Supply and fixing socket outlet, modular type 5-pin, 6-Amps, 2 module, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing ceiling rose, three phase/ PVC/ polycarbonate, isolated body type, complete all as specified and as directed .

Supply and fixing stepped type (multi-steps) electronic regulator modular type for ceiling fan 1200/1400 mm, 240 volts, 100 Watts, single pole, including connecting, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing in repair LED tube light fitting, 20 watt, 4 feet long indoor decorative high lumen batten, including connecting up with twin core twisted flexible copper conductor cable of suitable size from ceiling rose to fitting ternimal, complete all as specified and as directed .

Supply and fixing lamp holder, PVC Polycarbonate type with back plate suitable for batten fittings including LED lamp of 10 Watt,240volts in white colour with maximum lumen 850 base cap -B22 including taking down existing lamp holder and lamp, complete all as specified and as directed .

Supply and fixing in repair LED secruity light fitting of capacity 45 Watt in aluminium PDC housing, toughened glass cover with IP66 protection with suitable inbuilt surge protector with bracket made of GI pipe 40mm dia light grade 1.0 mtrs long duly cut and welded at an angle of 120 degrees and fixed to wall with 50mm X 6mm MS clamps-02 nos with 16mm dia bolts,nuts and washers, complete all as specified and as directed .

Re-fixing of existing ceiling fan of existing sweep, after taking down from the hanging location and dismantling of blades from the fan, cleaning the same with cleaning material as directed including painting there of with one coat of synthetic enamel paint by spraying Gun including filling cavities with filler and re-assembling the blades with fan & connecting up with twin core twisted flexible copper conductor cable of suitable size from ceilng rose to fan incl testing after completion of the job, complete all as specified.

Re-fixing of existing Exhaust fan of existing sweep, after taking down from the hanging location and dismantling of blades from the fan, cleaning the same with cleaning material as directed including painting there of with one coat of synthetic enamel paint by spraying Gun including filling cavities with filler and re-assembling the blades with fan & connecting up with twin core twisted flexible copper conductor cable of suitable size from ceilng rose to fan incl testing after completion of the job, complete all as specified. Note : Item form Srl item 107.00 to 186.00 shall be deposisted to AGE E/M store before start of any repair work and shall be collettd from the store and refixed as designated place as per respective specification after the repair work is accomplished.

Supply and fixing in repair sheet metal enclosures DB's double door factory made power coated out ofr CRCA mild steel sheet 1.2 mm thick with metallic painting white series, 240 volts 200 amps rated enamelled bus bar 08 way dust and vermin proof proof suitable for incorporation of MCBs duly concealed in wass and making good to disturbed surface and colour matching ,complete all as specified and directed.

Supply & fixing MCB SPN 32 Amps 10 KA,"B" series, AC, 240Volts, 50Hz, ISI marked,complete all as specified and directed.

Supply & fixing MCB SP 6 to 32 Amps 10 KA,"B" series, AC, 240Volts, 50Hz , ISI marked,complete all as specified and directed.

Supply and laying of well burnt bricks, sub class 'B' laid flat with width equal to length in trenches for protection of cable,complete all as specified and directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches ,complete all as specified and directed.

Supply,laying, connecting and testing 1100 volts grade, 16 sqmm, 2.0 core, heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape including taking down or up old unserviceable under ground cable,complete all as specified and directed. (Note : 1. Excavation, earth work, bricks protection and sand cushioning will be measured and paid separately)

Supply & fixing in repair tubes, light grade of 40 mm bore galvanised with all fitting for cable protection in trenches/wall/on pole including necesarry clamps sets and nut & bolts, complete all as specified and as directed by Engineer-In-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM, RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old unserviceable earthing items, complete all as specified and directed.

M/s Rajesh Kumar Contractor (BID ID -3355807)

M/s Chopra Constructions (BID ID -3347651)

M/s Vishal Engineers (BID ID -3348505)

M/S VERMA ENTERPRISES (BID ID -3347528)