REPAIR / MAINT OF WOODEN FURNITURE AT AIR FORCE STATION UDHAMPUR UNDER GE (AF) UDHAMPUR

Amount

WOODEN FURNITURE : Taking down worned out components of the following furniture items, S&F new component without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge

BED PLYTOP WOODEN (FD 246/247) ,

Head rest complete

Foot Rest complete

Long rail

Short rail

Stiffener

Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw

12mm thick BWR Ply wood top in one piece

CHAIR DINING (FD-203/279)

Rear Leg

Front Leg

Side rail with holes for weaving

Front/back rail with holes for weaving

Bottom stiffener

Back stiffener

Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

Chair Dining for JCO/OR FD/MAP-II/05

Rear Leg

Front Leg

Side rail with arrangement for fixing of PVC Sheet

Front/back rail with arrangement for fixing of PVC Sheet

Bottom stiffener

Back stiffener

PVC seat of Make : Amko/Cello as approved by Enginner-in-Charge

Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

CHAIR WRITING (FD-261/280)

Rear legs

Front Legs

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Arm rest

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

CHAIR DINING OFFICERS (FD/E6/MAP/10 & FD/E6/MAP/10 (R)

Rear Leg

Front Legs

Back rail of seat frame

Front/side rails of seat frame

Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick plywood

Bottom stiffener

Vertical back stiffener

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

CHAIR EASY(FD-229)

Rear Leg

Front Leg

Side Rail

Front/Back Rail

Arms rest

PVC Shoe as per sample approved

TEAPOY (FD-278/382)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

Provn of wooden tringular bracket of size 75x75x30mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PEG TABLE (FD-236/277/384)

Long rail

Short rail

Side stiffener

Provn of wooden tringular bracket of size 75x75x20mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

Table writing (FD-275)

Long rail

Short rail

Bottom centre stiffener

Bottom side stiffener.

Side of the box out of 18mm thick prelaminated particle board

Back of the box out of 6mm thick one side teak face commercial plywood.

Drawer as specified in drawing

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284)

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Drawer as specified in drawing

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

TABLE DINING 06 PERSON( FD-239/273)

Long rail

Short rail

Stiffener

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE DINING 08 PERSON( FD-239/273)

Long rail

Short rail

Stiffener

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE DRESSING LADIES (FD-251/378/395)

5mm thick Mirror of size 365mmx1220mm with Back ply of 6mm thick commercial plywood

Sliding glass shutter of 3mm thick as per existing size.

Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom

Knob as per sample approved

SIDE BOARD (FD-241/371)

Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top

Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top

Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top

Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom

Shutter made of 18mm thick prelaminated particle Board with hinges

Back made of 6mm thick commercial plywood.

Bottom frame with 4 Nos of legs shall be made of Ist class hard wood

Knob as per sample approved

TABLE CENTRE (FD-274/375)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE 900mm x 900mm (FD-291)

Top made of 18/19mm thick both side prelaminated particle board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75mm x 75mm made out of 35mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE DRESSING GENTS(FD-230/379)

Looking glass complete with frame and back plywood.

Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom

Knob as per sample approved

Hat Stand with Mirror (FD-FD-233/361/FD-362)

5mm thick Mirror of size 300mmx440mm .

4mm thick commercial plywood for back

Stainless steel MS pegs with screw as per sample approved

SOFA SET (FD-281/373/1113)

Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell duly covered with best quality tapestry clothof 250 (GSM)as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 450/- per RM

Table Bedside (FD/E-6/MAP/15 (R))

Top made of 18mm thick prelaminated particle board

Side 18mm thick prelaminated particle board

Back ply of 6mm thick commercial plywood of existing shape & size

Drawers as specified

Stainless steel Handle 100mm long

Telescopic channel of good quality.

TABLE DRESSING LADIES INCL STOOL(MAP) (FD/MAP-II/07)

5mm thick Mirror of size as per drawing with Back ply of 6mm thick commercial plywood

Sliding glass shutter of 3mm thick as per existing size.

Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated particle board as per existing shape and size with telescopic channel

Foam cushion 75mm, 40 density covered with fabric on seat to be fixed on 12mm thick plywood on stool as per existing shape and size

Wheel at the bottom of stool as per existing shape and size

Sofa Set 5 Seater (TP) Removal of unserviceable seat and back rexine cloth/ taperstry cloth of (250 GSM) and cushion of Sofa set 5 seater and S & F with new cushion 100mm thick of polyurethane foam density 40 Kg/ Cum (40 density) Make of foam Dunlop / sleepwell covered with new fabric of acrylic / polyester / polypropylene of rexine cloth / new tapestry cloth of approved make / shade duly providing quality all as specified and shown in drawing and as directed by Engr-in-charge

As per item No. 23 above but, for Sofa set single seater

RE-CANNING OF CHAIRS : Re-canning of wooden chairs as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

Sofa Set 3/4/5 Seats FD 281/373/1113 /FD/MAP-II/02 Supply wood and fixing of the fwg new parts after removing broken/unserviceable parts of well seasoned teak wood including tighting other parts of well seasoned teak wood with screw/bamboo pins only of the sofa complete all as specified in drawing & directed by Engineer-in-charge.

Front legs for three/single seater sofa

Rear legs for three/single seater sofa

Long front & Back rail for three seater sofa

Long front & Back rail for single seater sofa

Stiffner for three/single seater sofa

Side short rail for three/single seater sofa

Arms rest for three /single seater sofa.

plywood 10mm for three seater sofa.

plywood 10mm for single seater sofa.

PEG TABLE MAP, (FD/E6/MAP/11)

Long rail

Short rail

Side stiffener

Provn of wooden Triangular bracket of size 75x75x20mm at joint of leg and rail of peg table made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated particle board having surface colour as approved with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC/Rubber Shoe as per sample approved

Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.

Bed Plytop wooden - FD 246

Chair Dining FD-228/270/279

Chair Writing FD/261/280

Chair dining officer's FD/E6/MAP/10 (R) & FD/E6/MAP/10

Chair Easy FD-229

Teapoy (FD-278/382)

Peg Table (FD-236/277/384)

Table Writing (FD-275)

Table 900x600mm with drawer/without drawer

Table Dining 6 presons (FD-239/273)

Table Dining 8 presons (FD-239/273)

Side Board (FD-241/371)

Table Centre FD-274/375)

Table 900 x 900mm FD-291

Almirah Mess Utensils (FD-93(M)

Book Case (FD-147)

Chair dinning with long back FD-357)

Hat Stand with Mirror (FD-FD-233/361/FD-362)

Sofa Single Seater

Sofa Set 4 Seater (FD-281/373)

Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)

Chair dining for (JCO's/OR's) FD/MAP-II/05

Sofa Set 3 Seater (FD-281/373, 1113)

PEG TABLE MAP, (FD/E6/MAP/11)

M/S SHARMA TRADERS (BID ID -3072197)

PACHNANDA BUILDERS (BID ID -3082843)

shivom builders (BID ID -3073065)

R K BUILDERS (BID ID -3071369)