Replacement of 03 No. 100 HP LT motor, 01 No. 50 HP LT motor at SBD-1 Shahabazpur Disty. 02 No. 100 HP LT motor at SBD-2 Shahabazpur Disty., 02 No. 100 HP LT motor at SBD-3 Shahabazpur Disty., 02 No. 40 HP LT motor, 03 No. ATS 40 HP at SBD-4

Amount

Supply, Erection and commissioning of induction motors of 100 HP (Solid Shaft) Vertical Type 3 phase 415 volt, 960 RPM suitable for 20 Cs. VT pump as per specifications (Annexure-B) and site requirements(PH SBD-1=3,SBD-2=2,SBD-3=2).

Supply, Erection and commissioning of induction motors of 50 HP ,Hollow Shaft Vertical Type 3 phase 415 volt, 1440 RPM suitable for 10 Cs. VT pump as per specifications (Annexure-B) and site requirements.(PH SBD-1)

Supply, Erection and commissioning of induction motors of 40HP (Hollow shaft) 1455RPM, 415 V voltage, 3 phase, 50 Hz suitable for 9 /10Cs VT axial flow pumps, , bearing SKF / FAG as per specifications (Annexure-B) and site requirements at PH SBD-4

Supply, Erection and commissioning of induction motors of 30HP (Hollow shaft) suitable for 7.5 Cs VT axial flow pumps, , 1455RPM, 415 V voltage, 3 phase, 50 Hz bearing SKF / FAG as per specifications (Annexure-B) and site requirements at .(PH SBD-5)

Supply, Erection and commissioning of Solid shaft motor of capacity 60 HP ,45 KW,970 RPM, 3 phase ,440/415 Volt suitable for 15 Cs. V.T. axial flow pump having lift 13.38’ type vertical flange mounted as per specification approved by technical committee. ( SBD-5)

Replacement of 2 Cs existing V.T. axial flow pump including MS Delivery pipe, bend & support of bend as per site requirement & specification approved by technical committee (Annexure-A)(PH ALM-1),

Supply, Erection and commissioning of induction motors of 15 HP (Hollow shaft) 1455RPM, 415 V voltage, 3 phase, 50 Hz suitable for 2Cs VT axial flow pumps, , bearing SKF / FAG as per specifications (Annexure-B) and site requirements at PH ALM-1.

ATS Starter suitable for 60 HP motor as per specification approved by technical committee (Annexure-C)(PH SBD-5)

Starter star /Delta type suitable for 30 HP motor as per specification approved by technical committee (Annexure-C)(PH SBD-5)

Starter star /Delta type suitable for 15 HP motor as per specification approved by technical committee (Annexure-C)(PH ALM-1)

Supply, errection and commissioning of LTDB of 250 Amp. Capacity with one incomer of MCCB (250 Amp.) with 4 no. outgoing each of having 100 Amp. MCCB and 63Amp MCB for lighting loads indicators, relays, meters, push buttons, bus bars of 10/15 HP with additional arrangement of ON/OFF switches infront of motor for every starter with a stand of MS channel (1 feet up from floor) as per site condition and as per approved technical specifications. (Annexure-C)( for ALM-1

Replacement of 7.5 Cs existing V.T. axial flow pump including MS Delivery pipe, bend & support of bend as per site requirement & specification approved by technical committee (Annexure-A) (PH SBD-5)

Credit of Old Scrap of Iron (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Gun Metal (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Copper (Actual weight of old scrap will be measured by the committee)

Credit of Old Scrap of Aluminum (Actual weight of old scrap will be measured by the committee)

Third party inspection TPIA Charges

Sahil Engg. Works