REPAIR ROUTINE MAINTENANCE OF 06 NOS ELECTRIC LIFTS MAKE THYSSENKRUPP G PLUS 6 STOREY BLDG AT COLABA MUMBAI UNDER GE NW NAVY NAGAR COLABA MUMBAI

Amount

Sch 'A' PART-I Repair/maintenance of lifts including carrying out daily check and periodical services of fully automatic electrical lift with power operated door, simplex collective control system with repair/maintenance of unserviceable damaged parts such as bearings, bushes, all type of guide shoes, headers, hangers, door ropes,door cards,car door sills, landing door sills, door locks, control cards, and its contacts, hall push buttons and its spares, connector/links, welding of cracked /broken and MS parts, Landing operating Panel of any size and capacity, repairs /maint of unserviceable damaged door safety edge and sensor mechanical safety lock, magnetic lock or contact, car position indicator, and all connected accessories, necessary wiring of hall push button assembly, repair/maintenance of broken COP/LOP buttons and display, including cover, Fire alarm, Firemen button glass, Intercom, alarm/hooters, Maintenance of damaged hand rail, Shaft, light/switches, complete with illuminated push button and direction indicator with LED display with LPT/LPC card of stainless steel inclusive of harness wiring for laminating of push button of each floors and cutting wall making good disturbed surface with masonry work to make with existing surface & cable as per requirement for safe operation of lifts , fixing of loose rail bracket with necessary masonry work ,cabin, minor repair of cabin light and minor repair of cabin fan , ensuring safe and smooth functioning of lift and complete maint of car top, binding of loose wire at control panel and rust painting at car top and door and allied parts with testing, two coats of Painting of Gear motor, all MS channels and Control panels using spray gun complete, dewatering of lift wells in case of any emergency arises all as directed by Engineer-in-Charge. for lift: 13 Ps Lift (884Kg) (G+06 Storey) in Buildings R-36, R-37 and R-38 (Thyssenkrupp) Total (06 Nos of Lifts )

Notes for item No 1.00 : - (i) The Contractor has to carry out the AMC of the Lifts through OEM (Thysenkrupp) only for which he will enter an agreement with OEM (ii) The AMC should cover any/all parts of Lifts if its fucntions are found defective the same should be repaired or replaced by the OEM as per the timeline covered under norms. (iii) One mechanic shall be available round the clock at lift complaint cell for ensuring safe & smooth functioning of the lift (iv) Rewinding of motor if required will be done by the contractor and no extra cost will be given by the department. (v) The detailed duty mechanics of the firm shall report to the JE Concerned at the Lift complaint cell i.e. R-12 building . New Navy Nagar for receiving the complaints at round the clock daily including Sundays and holidays. (vi) The detailed lift mechanics shall sign ( Their shift wise) in the attendence register kept with lift cell.

Sch 'A' PART-II Taking down old unserviceable main steel wire rope after disconnecting old wire rope from counter weight, pulley and car cabin and supply and fixing new main steel wire rope 13 mm dia, ungalvanised, 8/19 construction in and including necessary connection with counter weight, pulley and car cabin with clamps, nuts, bolts and washers etc complete all as specified and directed by Engineer-in-Charge.in 8/13 /Goods Lift, G+14 Storey buildings.

Disconnecting and taking out old/unserviceable Governer rope of size 8 mm dia (8/19 Construction) ungalvanised including necessery connection with pulley in machine room and shaft pit complete with clamps, nuts bolts, and washers etc, for high rise building for 8/13/Goods lifts complete all as specified and directed by Engineer-in-Charge

Dismantling and taking out unserviceable safety edge of any type & supply and fixing new full beam infrared sensor upto full length of car doors (2.00 mtr) complete all as specified and directed by Engineer-in-Charge

Supply and fixing in repair automatic door drive unit with VVVF of 1 HP capacity complete all as specified and directed by Engineer-in-Charge

Taking down and supply and fixing hooter with emergency call announciator working on 12 Volts with audibility 90DB @ 100M distance with complete accessories and alongwith box including connecting cables complete all as specified and directed by Engineer-in-Charge

Taking down old unserviceable hall button and supply and fixing new full collective hall button fixtures with call registration light combined with Digital floor position indicator and Up/Down directional arrows at all floors with Stainless steel face plate complete all as specified and directed by Engineer-in-Charge

Taking down old unserviceable Chequered plate and supply and fixing Aluminium Chequered plate of 5mm thick duly fixed with nuts, bolts, washers,screws and covers with aluminimum angles section of size (40x40x4 mm thick) on corner of cabin in and including platform base of 10mm thick plywood of 08/13 Ps lifts complete all as specified and directed by Engineer-in-Charge

Disconnecting and taking out old/unserviceable shaft wiring, supply and fixing of shaft wiring in hoist way upto lower limit with PVC insulated copper conductor cable single core, 1100 Volts grade 0.75 Sqmm 24 Nos single core & 1.0 Sqmm for earth wire duly bunched with wire binding locking strip, drawing through in and including galvanised sheet metal trunking of 24 SWG up to ground floor in hoist for control to all function including in built connection for control panel, PCB, Hall push button, fire switch and lower limit switch complete all as specified and directed by the Engineer-in-Charge. for G+14 Storey building.

Disconnecting and taking out defective unserviceable main drive (any type) from existing control panel and supply and fixing CAN BAS Integrated drive suitable for 13 Ps lift G+14 storey building complete with all electric connection complete all as specified and directed by Engineer-in-Charge

Disconnecting and taking out defective dynamic breaking resistance from controller and supply and fixing new aluminium covered wire wound dynamic breaking resistor to absorb the reverse energy dissipation of motor during regeneration in control operation suitable for 11.0KW/15HP motor complete all as specified and directed by Engineer-in-Charge

Monarch Enterprises (BID ID -3066255)

Shree Elevator Engineering Co. (BID ID -3065967)

Escon Elevators Pvt Ltd (BID ID -3064565)

shakti engineering and electrical works (BID ID -3068383)