Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.0 LAccepted-AOC NO 133 SURAKUDY ROAD THIRUNALLAR POST KARAIKAL 609 607 | KARAIKAL | PUDUCHERRY | 609607 | L1 | Accepted-AOC Work order issued |
Tender Value
₹44.8 L
EMD Value
₹89,556
Closing Date
8 Nov 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer,
Buildings and Roads Division, Public Works Department, Karaikal
Providing approach roads to the newly constructed river bridge across Arasalar river at Athipadugai village in Thirunallar commune.
2023_PWDC3_14099_1
26-02/PW/BRK/2023-24
Open Tender
Civil Works
Item Rate
60 days
Karaikal
Please refer Tender documents.
6 documents required · 6 mandatory
₹525
₹89,556
4 Jan 2024
30 Oct 2023
9 Nov 2023
30 Oct 2023
8 Nov 2023
30 Oct 2023
Amount
Earth work in rough excavation (excluding rock) by using machinery and conveyance of the excavated earth from Nallambal lake and filling in the site for formation of approaches to the newly constructed river bridge across Arasalar river at Athipadugai village in Thirunallar in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lifts. (The actual quantity of earth conveyed will be calculated based on the levels and after deducting 5% of total quantity for voids for the pupose of payment). The rate to include the Royalty for earth, cost of earth work excavation, loading on tipper / lorries, tranportation, unloading at site, watering and rolling as specified above as per the direction of Engineer-in-charge.
Providing and laying unscreened gravel boulders to a specified consolidated thickness for sub base course including stacking of the material to the departmental gauge on road side for pre - measurement the volume of stacks calculated as per the actual measurement shall be reduced by 15% for looseness in stacking to arrive at the net quantity. The rate shall including labour charges for spreading and hand packing to the required camber and graded and rolling with power roller hire and fuel charges for all tools and plants employed and the cost of boulders etc., complete as directed by the Engineer-In-Charge.
Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MoRTH specification, 4th Revision - by plant mix method - for grading II material.
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density - Using vibratory roller. (As per MoRTH specification, 4th Revision)
Providing and laying dense graded bituminous macadam with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminouse binder @ 4.0 to 4.5 per cent by weight of total mix and filler, tranporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achive the desired compaction as per Clause 507 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II materials.
Providing and laying bituminous concrete with HMP of capacity not less than 40 to 60 TPH using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per clause 509 of MoRTH specification, 4th Revision, complete in all respects - Using grade-II material.-Bitumen 60/70
Providing and applying primer coat with bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (As per MoRTH specification, 4th Revision)
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg. per sqm. on the prepared bituminous / granular surface cleaned with mechanical broom. (As per MoRTH specification, 4th Revision)
Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes.
Providing and fixing 3M make reflective road studs of category 'A' raised pavement markers made out of poly carbonate /ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values conforming to ASTM D4280. The reflective raised pavement markers shall also confirm the length, height and width of the body shall not be less than 100mm,15mm and 90mm respectively and base of marker shall be flat within 1.3mm (3M equivalent). The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280. Lenses shall be moulded of Polycarbonate or methyl methacrylate conforming ASTM D788. The area of each retro reflectory surface shall not be less than 13.0 sqcm. The slope or retro-reflectory surface shall be 35+5 degree to base. Each reflector shall have a CIL not less than values specified in table 1 of said MORT&H circular and two cylindrical polymer shanks not less than 20mm diameter and not less than 30mm length shall be provided for better anchorage with bituminous grout or epoxy mortar all as directed by the Engineer-in-charge.
Supplying and installation of delineators (road way indicators, hazard markers,object markers),80-100cm high above ground level, painted black and white in 15cm wide strips, fitted with 80X100 mm rectangular or 75mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming to IRC:79
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .