REPAIRS TO FLOORING BRICK WORKS JOINERY LEAKAGE SEEPAGE CERTAIN BR WORKS AND CERTAIN EM WORKS AT AF STN RAJOKRI UNDER AGE BR AF RAJOKRI AND AGE EM AF RAJOKRI OF GE AF GURGAON

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified.

M&L for 40mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring finished even and smooth (without using extra cement) complete all as specified.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for laying floor finishes complete all as specified.

M&L for machine presssd precast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified.

M & L sand filling under interlocking tiles for cushioning including watering and consolidation complete all as specified.

M&L chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.

Taking down existing unserviceable water proofing treatment from roof slab including plaster and cleaning the roof slab by wire brush and removing the debries and WPT felt beyond the premises of MoD land.

M&L for 15 mm thick plaster in cement mortar (1:3) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified and directed by Engr-in-Charge. Notes : WPC shall be measured and paid seperately.

Supply only Intergral Water Proofing Compound

M & L for applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg/Sqm including cleaning surface complete all as specified.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster without aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over a tack coat of industrial coat of primer as per manufacturer's instructions of APP modified membrane sheet complete all as specified.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified.

M & L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified.

M&L 15 mm thick plastering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings Complete all as specified.

S&F Pre-painting galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed

S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified.

S & F Plates ( plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

All as per item No.27 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site.

Taking down shutter of any description n exc 1 Sqm and removing from site.

S&F for Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

S&F for Pressed steel frames 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified.

S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified.

S & F 75 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified.

S & F 100 mm Butt hinges, medium weight cold rolled, mild steel and fixed complete all as specified and as directed

S&F 100 mm size but hinges type C-21 extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, complete all as specified.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section. Complete all as specified.

S & F 100 mm size extruded aluminium alloy handles cast type anodised and fixed.

S & F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed.

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

Dismantling boarding of any description , fixed in any position with nails complete all as specified.

S&F 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F 18/19 mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified.

Dismantling ceiling board (fiber, pulp insulation etc) or insulation boards/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc complete all as specified.

M & L for clip in type armed strong metallic powder coated 0.5mm thick ceiling with GI framework made of standard Tee , angle or any other section as in grid type ceiling framework as approved by GE.Ceiling shall be hanged to roof trusses / purlin rafters with the help of GI wire not less than 4mm dia at an interval n exc 1m , the size of the metallic powder coated ceiling tiles 600mm x 600mm complete all as specified.

M&L prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified

S&F in repair venetian blinds 80 mm wide for window including necessary items required for fix to wall complete all as directed

M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for bedding of tiles complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20 -25 mm thick over cement screed based laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete all as specified and as directed

M & L Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polish complete all as specified and as directed

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc all as specified as directed.

Taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit (Accessories or components to be provided free for replacement by department)

Taking down unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and directed by Engr-in-Charge.

Taking down unserviceable MCB DB's/AC's box to deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any size/rating complete all as specified and directed by Engr-in-charge.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including concealed PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and making good, disturb surface as it is, all as specified and directed for the following. Note :- Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green

(a) One light point controlled by one,one way switch.

(b) One ceiling fan/exhaust fan/Air ciculator /bell point controlled by one way switch.

(c) One light point controlled by 2, 2 way switch.

(d) Socket 3 pin 5 Amps on the same board, complete all as specified.

(e) Socket 3 pin 5 Amps on independent board , complete all as specified and directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including concealed PVC conduit size of not less than 25mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 6 pin socket outlet two in one 16/6 Amps on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed by Engr-in-Charge

M&L in replacement for sub main wiring with two single core 2.5sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including1.5 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

All as per item No 63 herein befoe but submain wiring with 2x4Sqmm and 1x2.5Sqmm Complete all as specefied and directed.

All as per item No 63 herein befoe but submain wiring with 2x6Sqmm and 1x4Sqmm Complete all as specefied and directed.

All as per item No 63 herein befoe but submain wiring with 2x10Sqmm and 1x6Sqmm Complete all as specefied and directed.

S&F for switch socket outlet 5 Amps, 5 pin flush type, 240 volts. with polycarbonate body. complete all as specified and directed..

S&F for switch socket out let, 6 pin 5/15 Amps multi purpose 2 in 1 flush type, 230 volts with polycarbonate body.complete all as specified and directed.

S&F for switch piano flush type single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and directed..

M&L for switch piano flush type single pole two way 15 Amps 240 volts with polycarbonate body complete all as specified and directed..

M&L for bell push flush type single pole one way 5 Amps 240 volts with polycarbonate body complete all as specified and as directed.

M&L for bell electric heavy duty Ding Dong type 230 volts single pole complete and all as specified. complete all as specified and as directed

S&F For ceiling fan regulator stepped electronic type 300 watt rating, 230 volts with polycarbonate body all as directed.

S&F Modular switch 1 way 6A, 1 module all as specified and directed

S&F Modular switch 1 way 16A, 1 module all as specified and directed

S&F Modular switch 2 way 6A, 1 module all as specified and directed

S&F for modular socket outlet 6A 2/3pin combined 2 module complete all as specified and directed..

S&F for modular socket 6A /16A 2/3pin combined 2 module complete all as specified and directed.

S&F Modular fan step regulator, 120W 2 module all as specified and directed

M&L for ceiling rose 3phase/PVC polycarbonate isolated body complete all as specified and directed

S&F modular bell push 6A, 1 module complete all as specified and directed

S&F modular white cover plate with frame, 1 module complete all as specified and directed.

S&F modular white cover plate with frame, 2 module complete all as specified and directed.

S&F modular white cover plate with frame, 3 module complete all as specified and directed.

S&F modular white cover plate with frame, 4 module complete all as specified and directed.

S&F modular white cover plate with frame, 6 module complete all as specified and directed.

S&F modular white cover plate with frame, 8 module complete all as specified and directed.

S&F modular metal flush box 1/2 module complete all as specified and directed.

S&F modular metal flush box 3 module complete all as specified and directed.

S&F modular metal flush box 4 module complete all as specified and directed.

S&F modular metal flush box 6 module complete all as specified and directed.

S&F modular metal flush box 8 module complete all as specified and directed.

S&F sheet metal enclosure single pole and neutral two pin and earth plug and socket complete with one double pole MCB SP 20 Amps for geyser complete all as specified and as directed.Make- Havells/Legrand or equvalant.

S&F in replaceent of MCB DB sheet enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 with enclosure blank plates for unused way suitable for 8 way complete all as specified and directed : Havells or equvalant in Hager/ Legrand

All as per item No 94 above but 4 way, complete all as specified and directed.

All as per item No 94 above but 12 way, complete all as specified and directed.

S&F in replaceent of MCB DB sheet enclosure Triple pole and neutral 415V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 with enclosure blank plates for unused way suitable for 4 way complete all as specified and directed : Havells or equvalant in Hager/ Legrand

S&F MCB, single pole & neutral, 240 Volts 40 to 63 Amps,10KA B series complete all as specified and directed .Make:-Havells or equvalant in Hager/ Legrand

S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA, B series complete all as specified and directed Make:- Havells or equvalant in Hager/ Legrand

Supply and fix LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed .Make :- Phillips/ Bajaj/CG

Supply and fix LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed .Make :- Phillips/ Bajaj/CG

assf Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. Make- CG, Havells, bajaj

S & F Lamp holder insulated body with back plate for batten fittings.with polycarbonate body complete all as specified and as directed.

M&L for earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision 20 mm dia medium grade pipe and watering pipe shall be 20mm bore medium grade, and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified & directed . NOTE: (i) The concrete pit shall be PCC 1:3:6 type C-140 mm thick pre cast cover slab of RCC(1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with 8 mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cost iron cover shown in the electrical plate No.3 of MES SSR Part -1 (ii) item includes the cost of 7.5 m GI pipe for protection of GI wire. (iii) PCC pits extra cost of addtional length of watering pipe,bends elbows etc.shall be deemed to be included in the quioted rate. (iv) Item includes the cost of 7.5 mtr length Galvised wire 4 mm dia.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 6sqmm galvanised iron or steel wire complete all as specified and directed

S&F MCCB, three pole & neutral, 415 Volts 100 Amps,25KA complete all as specified and directed .Make:- Havells Or equvalant in Hager/ Legrand

S&F LED security light fitting 35/36 Watt, having uniformty ratio 0.25 , high pressure die cast aluminium housing , heat resistant toughened glass frame , IP-65 protection complete with lamp & connected items and connection with suitable cable from celing rose to light fitting and fixing on GI pipe bracket made out of suitable dia GI pipe medium grade 1.2 m long bend to shape and fixed on wall with flat iron clamps nut, bolts washers etc specified and directed

M&L in replacement for sub main wiring with two single core 2.5 Sqmm multi stranded copper conductor PVC insulated and unsheathed cable ISI marked drawn through in and including 25 mm dia, medium grade, steel conduit concealed in wall for sub main connection including1.5 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

M/S Rohit Enterprises

Shiv Shakti Builders