REPAIRS AND REPLACEMENT OF PLUMBING AND SANITARY FITTINGS FLOOR AND WALL TILES FALSE CEILING PLINTH PROTECTION ALUMINIUM JOINERIES PERIODICAL SERVICES AND OTHER MISC REPAIR WORKS AT RTC AND DIRECTORs ENCLAVE AT ZONE A AND CASDIC BSO WEST AND DSC L

Dismantling of floor or wall tiling including cement mortar bedding and disposing of debris outside MD land complete all as specified and as directed.

Dismantling of tiles laid, bedded and pointed in any mortar in floor, aprons etc complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles 300 x 200 x 7 mm / 450 x 300 x 7mm on vertical surfaces such as skirting / dados over and including rendering 10 mm thick in CM (1:3) as in backing coat for fixing tiles complete all as specified and as directed.

Material and labour for Non-skid ceramic tiles coloured 7 to 8mm thick in floors area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm,as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for vitrified ceramic coloured tiles light shade 10 mm thick (square / rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick CM (1:6) screed bed complete all as specified and as directed.

All as per ser item No 5.00 above but as in skirting over and including 10mm thick rendering on brick work or concrete surface as in backing coat of cement mortar (1:4) complete all as specified and as directed.

Material and labour for granite 20mm thick of any type work (table rubbed and polished) as in cooking plat forms and like, over and including cement mortar (1:4) including pointing in white cement 1:2, using marble dust with admixture of pigment to match the shade of granite stone including cutting and polishing laid on 15 mm thick screed bed in CM 1:4 set and jointed complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Material and labour for Chequered cement concrete tiles of size 250 x 250 x 25mm thick set, jointed and pointed in neat cement slurry with mixture of gray and white cement over and including screed bed 15 mm thick in CM(1:6) complete all as specified and as directed.

Material and labour for preparation of old wall surfaces and applying one coat of cement paint of approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of surfaces of any description of old painted surfaces and applying one coat of plastic emulsion paint of approved tint complete all as specified and as directed.

Complete removal of existing treatment of wall surfaces and finishing the surface with 3 mm Birla / JK wall care putty to receive the good and smooth surfaces and applying two coats of plastic emulsion paint of approved tint over a coat of primer complete all as specified and as directed.

Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004. Alkali and fungal resistance, dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including removal of existing treatment as per the manufacturer instructions complete all as specified and as directed by Engineer-in-Charge.

Material and labour for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004. Alkali and fungal resistance,dirt resistance exterior paint of required shade (company Depot tented) with silicon additives @ 1.43litre/10sqm weather proof emulsion paint over and including priming coat of exterior primer complete including preparation of new surface as per the manufacturer instructions complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of old painted wood or wooden based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 15mm thick rendering on brick or concrete surface in cement mortar (1:4) and finishing the surface with even and smooth without using extra cement including taking down old plaster complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed by Engineer-in-Charge.

Material and labour prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in shutters for kitchen shelves / cup boards with nails complete fixed in repairs complete all as specified and as directed.

Material and labour prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with nails to timber frame work as in pelmet boxes or in narrow width n.exc 15cm each with nails complete fixed in repairs complete all as specified and as directed.

Supply and fix in repairs of Drapery Rod 20mm dia, Decorative type complete all as specified and as directed.

Supply and fix in repairs of End Stopper, Decorative type and fixing Brackets for the Drapery Rod 20 mm dia. (One Set comprises of 2 No. of Decorative type End Stopper 2 No. of fixing Brackets) and fixed-in-repairs, complete all as specified and as directed.

Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed tinned tacks or aluminium wire staples complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix in repair ball catcher with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and as directed.

Supply and fix in repairs aluminium anodised barrel tower bolt of extruded section of length 100 mm complete all as specified and as directed.

Supply and fix in repairs 40mm width of flap (when open) continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

Supply and fix in repairs mortice lock brass vertical type 4 levers 100 mm, complete all as specified and as directed of make Godrej or equivalent.

Supply and fix 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring, shoe complete all as specified and as directed.

Supply and fix in repairs mortice lock Aluminium vertical type 4 levers 100 mm of make Godrej or equivalent complete all as specified and as directed.

Material and labour for washing, rubbing down and stopping of old distempered wall surfaces and applying two coats of distemper oil emulsion of approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for washing, rubbing down and stopping of old distempered wall surfaces and applying one coat of distemper oil emulsion of approved tint on wall surfaces complete all as specified and as directed by Engineer-in-Charge.

Material and labour for washing, rubbing down and stopping of distempered and painted surfaces of old distempered surfaces and applying two coat of distemper oil emulsion of approved tint on ceiling surfaces complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) sections as in door shutters,aluminium section weighing 0.55 kg/ M including joining cleats , glazing clips, rubber neoprene packing, handles - 2 Nos in each door, hinges, snap beading, screws complete fixed in repairs complete all as specified and as directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) sections as in windows and ventilator shutters, side hung type without sash bars,aluminium section weighing 0.55 kg/ M including joining cleats, glazing clips, rubber packing , hinges type B-21 100 mm long 2 nos, suitable handle 1 No, snap beading, screws complete fixed in repairs complete all as specified and as directed.

Supply and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators, with one or more rebates including joining cleats for fixing, complete all as specified and directed by Engineer-in-Charge including taking down old joinery etc. complete all as specified and as directed.

Supply and fix in repairs figured glass pane pin headed including removing loose or decayed putty sheet figured glass, pin head type and glazing with oil putty / rubber beading in square not exceeding 0.5 Sqm in each pane of 4 mm thick etc complete all as specified and as directed.

Supply and fixed in repair Aluminium (Die cast) body door closer, hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fixing 5.5 mm thick sheet glass ordinary quality and glazing with oil putty / glazing pins / spring clips / rubber beads exc 0.50 Sqm each pane complete all as specified and as directed.

Supply and fix in repairs solar control film 50 micron thick reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Supply and fix in repairs venetian blinds vertical type 100 mm width with approved fabric and powder coated aluminium fittings such as top rails, metal weight nylon button loops etc to, match with the top rail metal base complete all as specified and as directed.

Resecuring or easing and adjusting of shutters, without taking down but area exc. 1 sqm but not exc. 2 sqm each complete all as specified and as directed.

Resecuring or easing and adjusting of shutters, without taking down but area exc. 2 sqm each complete all as specified and as directed.

Supply and fix in repairs 15 mm CP cast copper alloy bib taps with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule in repairs complete all as specified and as directed.

Supply and fix in repairs Bib taps, long body, 15mm dia without wall flange, foam flow, chromium plated, fancy type, screwed down, screwed for iron pipe complete all as specified and as directed.

Supply and fixing CP wall mixer with telephonic shower including plugging and screwing to walls fixed in repairs complete all as specified and as directed. MAKE :- Jaquar or equivalent.

Supply and fix in repairs brass chromium plated bottle traps for WHB / urinal with inlet and outlet screwed for pipe including necessary packing union and cap 40 mm bore / suitable of trap complete all as specified and as directed.

Supply and fixing brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and capacity for 32mm dia and fixed complete all as specified and as directed.

Supply and fix in repairs 15mm dia pillar taps, fancy type, cast copper alloy with capstan heads, chromium plated screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs 15 mm dia fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix in repairs 15 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs 20 mm dia of bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.

Material and labour for waste fittings, 32mm dia brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed in repairs complete all as specified and as directed.

Supply and fix in repairs15mm dia fancy type chromium plated with long shank Stop valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle (concealed type) screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supplying and fix in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

All as per Ser item No 56.00 above but 600mm length all as specified and as directed.

Supply and fix in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern including jointing to squatt pattern closet and making good the floor complete all as specified and as directed.

Supply and fix in repairs stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen with plugs, waste pipe and washer’s including cast iron cantilever brackets, connecting union etc over all size 915 mm x 460 mm with bowl size 410 x 330 x 200 mm complete all as specified and as directed.

Supply and fixed in repair PVC flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle etc complete all as specified and as directed.

Supply and fix Gun metal globe or gate valve of 20mm bore with Iron wheel head, screwed both ends for iron pipe and fixed in repairs complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps but including brackets, cutting for and pinning brackets or erecting stands /rockbolts to fixing complete all as specified and as directed.

Supply and fix in repairs water closet seat cover white or black colour closed pattern with flat bottom complete all as specified and as directed.

Supply and fix in repairs grating of 125mm dia of stainless steel for floor trap etc, complete all as specified and as directed.

Supply and fix in repairs grating of 125mm dia but with holes of stainless steel for floor trap etc, complete all as specified and as directed.

Material and labour for 15mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Material and labour for 20mm GI tubing medium grade with all fittings fixed to walls, ceiling or laid in floors including taking up or down existing steel tubing and connections complete all as specified and as directed.

Supplying and laying in repairs of 20mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete including all fittings complete all as specified and as directed.

All as per Ser item No 68.00 above but 25mm dia CPVC pipes

Supply and fix in repairs brass CP shower rose 125mm with or without / swivel joints complete all as specified and as directed.

Supply and fixed in repairs EWC vitreous china pan with 'S' or P trap white , including connection to drain or outgoing pipe and flushing pipe, antisyphonage pipe etc complete all as specified and as directed. MAKE:- Jaquar / Kohler /Grohe

Supply and fix fancy type chromium plated 2 way bib tap 15mm dia with CP flange as fixed in repair complete all as specified and as directed. MAKE:- Jaquar / Kohler /Grohe

Supply and fix in repairs Health faucet,(ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed. MAKE:- Jaquar / Kohler /Grohe

Cutting screwing existing steel tubing of 15mm dia for addition/alterations pipes etc complete all as specified and as directed.

Cutting screwing existing steel tubing of 20mm dia for addition/alterations pipes etc complete all as specified and as directed.

Taking up or down 15mm dia GI old tubing and connections including cleaning and re-fixing in new or old position to walls / chases / ceilings or laying in floors etc complete all as specified and as directed.

Taking up or down 20 mm dia GI old tubing and connections including cleaning and re-fixing in new or old position to walls / chases / ceilings or laying in floors etc complete all as specified and as directed.

Supply and fix in repairs Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.

Supply and fix in repairs Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed.

Supply and fix in repairs vitreous china water closet (Orissa pattern) of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe and provision of concrete bedding etc complete all as specified and as directed.

Supply and fix in repairs CP brass tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Supply and fix in repairs Cabinet mirror, moulding theremoset litron formaldehyde of plientil formaldehyde with chromium plated frame openable type and mirror colour white complete all as specified and as directed. Make : Prayg / Commander

Supply and fixed in repairs corner shelves glass fitted with CP brackets and screws complete all as specified and as directed.

Supply and fix in repairs Nipple PTMT suitable for 20 mm dia bore pipe in HDPE water tank (Minimum weight 20mm dia -45 gms/) complete all as specified and as directed.

Supply and fix in repairs Extension Nipple PTMT suitable for 15 mm dia bore pipe in HDPE water tank (Minimum weight 15mm dia -18gms) complete all as specified and as directed.

Demolition of PCC (Unreinforced) in ground floors and pavings n.exc 15cm thickness including removal of debris upto a distance of 500 metre from the building complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick Plain Cement Concrete, type C2, (1:3:6), using 40mm graded stone aggregate as in path, hardstanding, plinth protection etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying silicon sealant in the gaps of windows in repairs complete all as specified and as directed by Engineer-in-Charge.

Material and labour in repairs for fixing rubber beading for Aluminium windows complete all as specified and as directed by Engineer-in-Charge.

Cleaning accessible or non accessible roof including cleaning the RCC roof with wire brushes , removal of tree root, caked mud etc sweeping with brooming and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and removal of debris from the site premises complete all as specified and as directed as directed by Engineer-in-Charge.

Material and labour for double action floor spring hydraulically regulated made up of minimum1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs complete all as specified and as directed.

Material and labour for fixed in repairs Sensors only for Automatic touchless ceramic Urinal sensor / sensor flusher of approved make complete all as specified and as directed by Engineer-in-Charge.

Demolishing cement concrete in roof padding etc manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-Charge.

Material and labour for Plain Cement Concrete, type B1, (1:2:4), using 20mm graded stone aggregate as in roof padding, kerbs or mud stops, rounded or chamfered on edges kerbs etc complete all as specified and as directed.

Cleaning of surfaces by use of wire brush, water jet and grinding etc to remove all loose dust, fungus, oil, grease etc. all the existing membrane and primer and other foreign particles removed by Grinding and other mechanical means completely to reach base slab, complete all as specified and as directed.

Material and albour for rain water outlets packing by checking the soundness of the existing treatment around the outlets and removing any loose mortar if any, followed by filling the gaps with high strength non-shrink cementitous grout Dr. Fixit Pidi grout 10M and sealing around the pipe outlets using single component highly elastomeric Dr. Fixit PU sealant complete all as specified and as directed.

Material and labour for Cut open the crack in V-groove manner up to 5 to10 mm wide by mechanical cutter, clean the groove with air blower to remove dust, dirt etc. fill the cracks with Dr. Fixit PU Sealant after necessary cleaning. post filling, apply one coat of polyurethane coating over the sealant by sandwiching 45 gsm fiber mesh between sealant and PU coating. The width of PU coating shall be 100 mm, applied all along the length of cracks complete all as specified and as directed.

material and labour for priming by providing, mixing and applying one coat of efflorescence resistant penetrating primer, Dr. Fixit Primer seal, primer at a rate of 7.0 to 8.0 sq.mt / litre in the SSD condition, allow the primer to dry for 4 hrs, prior to application of Dr. Fixit Roof seal ultra top coat waterproof coating systems complete all as specified and as directed.

Providing and applying single component, GRIHA certified, water based eco-friendly high performance UV resistant elastomeric hybrid polyurethane Coating, Dr. Fixit Roof seal Ultra without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat in 1st coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat. Ensure there are no pinholes or air bubbles on the membrane surface. Apply second coat of Dr. Fixit Roof seal Ultra without dilution spreading at the rate of 0.70 litre / Sq.mt /Coat to achieve total dry film thickness of 850 to 1000 microns at forced coverage at the rate of 1.40 litre / Sq.mt in 2 coats. The coating shall be done on entire horizontal area , upstands,vertical paraphet wall etc.. This coating shall meet and exceed the ASTM D 6083 - 97a standard specification. Attains a Tensile strength of ≥ 4.00 N/mm2 with 45 GSM glass fibre mesh confirming to ASTM D 412; Elongation at break ≥300% and crack bridging ability up to 3 mm, Solar Reflectance Index as per ASTM E 1980 – 105, Water permeability @5 bar – Nil as per EN12390 - 8:2019. Air cures the coating for 7 days all as directed.

Material and labour fior cracks filling by opening non-structural hairline cracks in plaster surface up to 5mm width in “V” shape and fill with Dr. Fixit Crack-X Paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr. Fixit Crack-X Shrink free. Cracks more than 10 mm and all separation gaps should be filled up with Polymer modified mortar (PMM) mix with Dr. Fixit Pidicrete URP 10% by weight of cement in the ratio of 1:3 curing etc. as per standard methodology. All joints between CC members and masonry / pipe penetration shall be racked out at least 10 mm deep. The gap shall be sealed by (PMM) polymer modified mortar admix with Dr. Fixit Pidicrete URP 10 % by weight of cement in the ratio of 1:3 all as directed.

Providing and fixing in true horizontal 600 mm. X 600 mm false ceiling board manufactured by M/s Armstrong World Industries complete all as specified and as directed.

Supply and fixed in repair Swan neck pillar cock 15mm dia of CP brass type with casted spout without foam flow complete all as specified and as directed.

Supply and fixing one piece EWC with soft close seat cover 660 x 365 x 765mm with concealed 'S' or P trap white, including connection to drain or outgoing pipe and flushing pipe, antisyphonage pipe etc complete all as specified and as directed. MAKE :- Jaquar / Grohe / Kohler

Taking down chowkat or framed with shutter (without taking off shutter from the frames) area not exceeding 1.5 sqm each complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening as per specification and drawings fixed with drilling and min 100 mm screw with rawl plug complete all as specified and as directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails.M.S.frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.

Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and as directed.

Supply and fix aluminium extruded section body section door closer hydraulically regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

Material and labour for SMP Magma factory made 18mm thick 100% Solod WPC (wood polymer composite) laminated / plain board of required size comprising of virgin PVC resin of K Value 57-60 (suspension grade), Calcium carbonate and natural fibers (Wood powders/ rich husk/wheat husk) and non- toxic additives, made from extrusion process foam sheet single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw withdrawal strength of 2000 N (face) & 1100N (Edge) minimum compressive strength of 50 N/mm2, Modulus of electricity 850/N/mm2 and resistance of spread of frame of class A category with property of being termite/ Borer free. Water/ moisture proof and fire resistance . WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing headed counter sunk ss screws complete all as specified and as directed.

Supply and fixing in repairs syphon kit as required for low level flushing cistern complete all as specified and as directed.

Material and labour for PVC Edge band tape of approved brand and colour as specified by Engineer-in- Charge.

Providing and carry out expansion joint treatment after proper surface preparation to remove loose mortars, dust, foreign particles from joints, fixing of tightly packed closed cell polyethylene based back up rod or filler board to ensure no gaps or voids exists, mask face edge of the joint using masking tape for neat finish, mixing of Dr. Fixit Tape Adhesive– Two part Epoxy Adhesive using slow speed drill till get homogeneous mix, apply it to prepared joint 1-2mm thick with notched trowel or putty blade, tooled to a smooth finish and finally fixing of Dr. Fixit Seal Tape– Flexible expansion joint membrane available in 1mm thickness and 150 mm wide exhibiting superior mechanical properties like, Elongation >500%, Tensile Strength >12N/mm2, Tear Strength >200N above joint followed by another layer of epoxy adhesives Dr. Fixit Tape Adhesive as complete as per manufacturer’s specification. For joint over end laps, the overlaps surfaces must be clean, wiped and lapped with 100 mm overlap. After application the system should be allowed to cure for 7 days complete as specified by Engineer-in- Charge.

Protecting the expansion joint system with Aluminium sheet of 1 mm thick in a U shape fashion or as per the design or site condition, extending the same on both side horizontal section and vertical section, with riveting one side only as per the manufacturer instruction and as specified by Engineer-in- Charge.

Material and labour for aluminium alloy left and right hand side locking handle for casement windows (Brown) complete all as specified and as directed.

Please Enable Macros to View BoQ information