MLA 2025-2026

Earth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundationEarth work excavation and depositing on bank with in initial lead of 10m and lift of 2m in hard gravelly soil as per SS 20 B for foundation

Supply Filling in foundation and basement with crushed stone sand including cost and conveyance of all materials to site and all labour charges etc complete

Supply Filling in foundation and basement With Carted Earth Including cost and conveyance of all materials to site and all labour charges etc

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for foundation etc. Compete

Brick Work in Cement mortar 1:5 mix using country bricks including cost and conveyance of all materials to site and all labour charges etd. Compete

Brick partition walls using country bricks of size 83/4"x41/4"x23/4" 6 etc., complete.

Supplying and errection of centering for sides and soffits with 7 M.S.sheet and country wood props including hire charges for materials and all labour charges etc complete

for plane surface such as RCC floor slab roof beam lintel wtc

Sunshade

Supplying and fabrication of steel Including cost and conveyance of steel to site and cost of binding wire including all labour charges for 8 cutting bending, tying and forming grills for all works

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser/super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without 9 Imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10-12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M-Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming extra cost etc.,

b. For SS in Ground Floor

Plastering with cement mortar 1:4 mix to20mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete.

Ceramic tiles flooring laying with new ceramic tiles of size 300x300x6 mm laid in C M 1:3 inculding cost of white cement and labour charges etc

Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2 20mm thick and pointing with white cement 0.4kg/sqm mixed with colouring pigment to suit the colour of the tiles including finishing the joint neatly complying with std specification

Granolethic floor finish with cement concrete 1:2:4 mix using 10-12mm ISS chips including cost and conveyance of all materials and all labourcharges etc, complete

Finishing the top of the roof with one course of machine pressed tiles including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Exterior Emulsion two coats with best approved Plastic Emulsion 16 including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion two coats with best approved Plastic Emulsion including cost and conveyance of all materials to site and all labour charges etc complete

Exterior Emulsion two coats with best approved Plastic Emulsion 8 including cost and conveyance of all materials to site and all labour charges etc complete

Painting two coats over new iron works using ready mixed enamel paint including cost and all labour charges etc complete

Supplying & fixing with cuddapah slabs including cost and all labour charges etc complete

Manufacturing, supplying and fixing in position of RCC Jally of 5cm tk in CM 1:2:4 using 20mm machine crushed stone jelly (Excluding cost of Reinforeced Steel) including cost and conveyance of all labour charges

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W. switch box with 5amps F.T. switch in flush with wall covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wireconnection of 14 SWG wire for cocealed Light point/fan point (5 points per coil) [SD No. 24]

Wiring with 2x1.5(22/0.3) sqmm PVC unsheathed SC Copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with 150×100×113mmTW switch box for 5A - 3 pin-non inter locking CS plug Including pin top with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed PVC Plug Point [SD NO 37]

Supply and fixing of 16 Amps DPIC switch of 500 V with fuse and neutral (side handle) on suitable T.W.box with earth connection only. [SD no.142)

Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb. [S185] Bulk head Fitting

Supplying and fixing of CFL bulb

Supplying and fixing of Ceiling FAN

Service wire

Service Pipe

Supplying and fixing in position Indian closet (9oriya type) of size 580 X 400 mm white glazed earthern ware of approved quality and brand with "p" of "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40 mm broken, brick jelly in lime concrete 1:2:5 (One Lime, Two Sand, and Five nrick jelly) 100 mm thick and finishing the top to the 30 require slope and including giving necessary connection to Ci soil pipes (including the cost of 100mm dia Cl pipe for a length of 600mm) by dismantling brick masory wall/reinforced cement concrete roof/floor slab and making good the dismantled portion to the original condition with leakages etc., complete compleying with standard

Supplying and fixing in position 15mm dia brass CP screw down tap /Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete mplete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works

Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the 32 roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications

20mm dia UPVC Pipe - Toilet Delivery Line

Supplying and fixing UPVC specials including labour charges etc., Complete

Elbow

25x20mm reducer

Elbow

25x20mm reducer

Supplying and fixing UPVC specials including Supplying and fixing in position best quality PVC soil/waste pipes of various dia having 6 kg/sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC/MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75mm dia PVC Soil / waste pipe

Supplying and fixing in position PVC Specials of the following dia and types of approved quality conforming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-complete complying with standard specification. (The PVC Special should be got approved by the Executive Engineer before use on works)

Elbow

Elbow

Supplying, laying and jointing glazed stone ware pipes of the following dia of approved quality with spigot and socket ends and fixing them in dry condition using spun yarn and cement including petty masonry shoring and strutting wherever found necessary and laying the pipe line in the alignment at the specified gradient and testing with necessary tools and plants, etc., and re-filling the trench with excavated earth and levelling the ground etc., complete

Fabrication and supply of mild steel Door of any size with single leaf outer 37 frame made of 35 * 35 * 5 mm equal M.S angle and shutter frame made of 25 * 25 * 5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete

Solid PVC Door shutter using 19 gauge 19mm MS sq. tubes for styles and outer frames, 15mm MS sq. tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm * 45mm with suitable suitable rebate for housing the shutter

Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of "Z" section F7D of size 33 * 25 * 3mm at 1.419kg/m and mullion "J" section (F4B) of size 46 x 25 * 3mn at 2.28kg/m and shutter section of made of F7D of 33 * 25 * 3mm at /m as specified in IS 7452/1990, ach openable shutter exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0, 70kg / m 3Nos. for each shutter and additional diagonal stiffeners of the flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly

Supplying and fixing Steel glazed ventilators with side hung swing shutter outer frame and shutter frames

Supplying and Erecting Pull and Push type Rolling Shutters With ISI Make of approved size and Section using 18 G1 Sheet The Shutter Sahll be Painted with one coat of Red oxide primer and the rate is Inclusive of Hood covers Transportation Charges etc,

Please Enable Macros to View BoQ information