ADDITIONAL/ALTERATION AND DIVERSION OF LT UG CABLE AND CONNECTED ITEMS AT NSD SEWRI AND SPECIAL REPAIR FOR REPLACEMENT OF OLD LIGHT FITTING INTO LEDS AND CONNECTED ITEMS AT NSD SEWRI UNDER GE (NW) MANKHURD

Amount

Notes : (i)The contractor should be in possession of valid electrical license to execute electrical works. (ii) Supervisor for execution of electrical works/ electrical component of works employed by the contractor shall possesses supervisor certificate of competency issued by concerned State Government/ Union Territory and the worker/ tradesmen for execution of electrical works/ electrical component of works shall hold necessary permit issued by concerned State Government/ Union Territory. Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc, complete all as specified and directed.

Taking down main switches/DBs with enclosure and its components of any size and capacity etc, complete all as specified and directed.

Taking down earthed metal clad socket outlet with earthed plug top 20Amp capacity , sheet metal enclosed and one 20 Amp MCB SP all as specified and diredted.

M & L for point wiring with proper colour coding, using 1100 Volts grade, 1.5 Sqmm, PVC insulated, FRLS, unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked drawn in and including PVC conduit (minimum 25mm in width) fixed on the surfaces of wall, ceiling etc with all accessories, fittings, PVC junction boxes etc, sunk pressed steel terminal boxes not less than 2 mm thick, 50 mm deep covered with 3mm thick plastic laminated sheet top cover fastended with chromium plated brass screws, also including 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multistranded copper conductor green colour as continuous earth wire connected to common earth dolly all as specified and directed for one light point /fan/bell point controlled by one one way switch, complete all as specified and directed.

All as per item No. 4.00 above but for One 2pin/3 pin socket outlet 5 Amps on same board complete all as specified and directed.

All as per item No. 4.00 above but for One 2 pin/3 pin socket outlet 5 Amps on independent board.

M&L for point wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn in and including PVC conduit (minimum 25mm in width) fixed on the surfaces of wall, ceiling etc with all accessories, fittings, PVC junction boxes etc, sunk pressed steel terminal box not less than 2 mm thick, 50 mm deep, covered with 3 mm thick plastic laminated sheet top cover fastened with chromium plated brass screws, with 2.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth dolly for 15 Amps, 3 Pin, socket outlet independent, complete all as specified and directed.

S&F Switch Piano 5 Amps, 230 Volts, one way, flush type, complete all as specified and directed.

S&F ceiling rose three terminal, 230 Volts, PVC / Polycarbonate body, complete all as specified and directed.

S&F Switch Socket combination 2 in 1 , 5 Amps, flush type, 5 Pin, 230 Volts, complete all as specified and directed.

S&F Switch Socket combination 2 in 1 , 5/15 Amps, flush type, 6 Pin, 230 Volts, complete all as specified and directed.

S&F fan regulator, electronic stepped (5 step), 230 volts, 100 watt, flush type and connecting-up, complete all as specified and directed.

Supply and fixing earthed metal clad socket outlet with earthed plug top 20Amp capacity , sheet metal enclosed and one 20 Amp MCB SP all as specified and diredted.

S & F MCB DB, 4 way, SPN, single door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB DB, 8 way, SPN, Singe door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed. Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.

S & F MCB, SPN, 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed.

S & F MCB, SP, 06 to 32 Amps, 240 Volts, 10 KA Breaking capacity, C-series, complete all as specified and directed.

S&F Retro LED tube rod 20 Watts, 230 volts, with high efficency PMMA diffuser, the rod shall conform to Cat no LTT8-20 of Crompton or Equivalent from Philips/Bajaj/Havells complete all as specified and directed.

S&F in repairs decorative box type fitting prewired for Retro LED light fitting 20 Watts, 230 volts, including 2 Nos PVC Square blocks , scews , 3 core 1.5 Sqmm cable for connection between ceiling rose & fitting complete all as specified and directed.The fitting shall conform to Cat no DMLN 1LT8-16 of Crompton or equivalent from philips/Bajaj/Havells.

Supply and fix in repairs SUPRA NEO-I LED Lights fittings 35 W well glass in PDC Aluminium housing with finless design and exellent thermal management offering high durability and superior performance with energy saving and having efficiancy of 110 Lm/W. Ingress protection of IP66 confirm to CAT No LWV12-35-(CDL) of crompton or equivalent from Philips/Bajaj/Havells

Supply & fix heavy duty exhaust fans AC single phase 230/ 240 V of size 450 mm sweep with louver complete all as specified and directed. Make : Supreme Delux 450 mm, 900 RPM of Bajaj/Havells/Crompton

M&L for in repair circuit wiring using proper colour coding with 1100 Volts grade, 2.5 Sqmm PVC insulated, FRLS, unsheathed, wire confirming to IS-694, Part-II, ISI marked with multistranded copper conductor drawn in and including PVC conduit (minimum 25mm in width) fixed on the surfaces of wall, ceiling etc with all accessories, fittings, PVC junction boxes etc, with 2.5 Sqmm, PVC insulated, FRLS, unsheathed, multistranded, copper conductor 1100 Volts grade, green color, continuous earth wire connected to common earth complete all as specified and directed.

Supply, laying and testing in repairs cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded copper conductor of size 6.0 sq mm 2 core complete all as specified and directed.

Taking out old unserviceable underground cable XLPE insulated, PVC sheathed armoured heavy duty aluminum conductor LT 1100 Volts grade of size 3.5 Core 120 Sqmm, fixed on pole, wall and laid in trenches etc after disconnecting complete all as specified and directed. Note - Excavation and earth work will be mesured and paid seprately.

All as per item no 24.00 but of size 3.5 core 240 Sqmm

Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 mtr depth for laying of underground cable, erection of poles etc. and getting out in soft/loose soil including separating serviceable cable protection PCC cover for re-use at site obtained during excavation complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid in trenches complete all as specified and directed.

Laying only un-reinforced precast concrete cable cover class LV, type-I, flat size 250mm x 150mm x 40mm laid etc complete all as specified and directed. Note :- Serviceable cable cover obtained from Ser Item No 26.00 above shall be reused.

M & L for sand cushioning by spreading in trenches fine dry river sand by gently punning down manually as in cable protection all as specified and as directed.

Supply and Laying or fixing or passing through pipe, XLPE insulated, ISI marked armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 240 Sqmm 3.5 core in trenches, along the wall including necessary connection and providing cable lugs as required comlete all as specified.

Supply and Laying or fixing or passing through pipe, XLPE insulated, ISI marked armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 120 Sqmm 3.5 core in trenches, along the wall including necessary connection and providing cable lugs as required complete all as specified and directed.

M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying GI tube returning filling & well ramming watering finish surface 10 cm from top using PCC 1:3:6; including removal of surplus soil complete all as specified and directed.

S&F HDPE pipe 100 mm dia, PN-10 for laying in ground, road crossing etc for cable protection including necessary fittings, clamps for supports, etc complete all as specified and directed.

Supply and fixing Cast iron cable route marker disk type round dia 150, 3mm thick with support angle of size 30mmx5mm thick,length 3 feet complete with PCC base of thickness not less than 20cm and size 20cmx20cm complete all specified and directed. Note : A sum of Rs 25,585.00 towards sch of credit shall be deducated to arrive the contract sum.

Radha Engineering Services

Chaudhary Enterprises

sapana enterprises

M/s R J TRADING CO