REPAIR MAINT OF TILING, PLUMBING, SANITARY FITTINGS, JOINERY, PLASTERING ETC IN THE AREA OF AGE BR-I UNDER GE FAIZABAD

Amount

Taking down chowkhats or frame (with shutter w/o taking off shutter from frame) exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

Taking down chowkhats or frame (with shutter w/o taking off shutter from frame) n.exc 1.50 Sqm complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour pvc 'C' channel having a PVC sheet strio of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail,Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement supply anf fixing in the frame at site as per specification and drawing.

S&F 100mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 100 mm long aluminium handle cast type anodised and fixed complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkats and frames as in arched portion, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed by Engr-in-Charge.

S&F powder coated aluminium sections of size 49.91x44.45x2mm thick as in partitions with and including 5mm thick tinted sheet glass and 12mm thick prelaminated partcle board, interior grade, prelaminated on both sides with decorative choice laminations, fixed with rubber / aluminum snap beading including aluminium joining cleats, screws, anchorage rod, drilling / punching holes in flooring/walls and making good the disturbed surfaces to match the existing complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised door with shutter, chowkhats/frame made of aluminium section of size 100 x 44 x 2 mm thick, vertical styles of shutters made of sections 84 x 44 x 2 mm thick and top/ middle / bottom rail of shutter of section 112 x 44 x 2 mm thick with and including 5 mm thick tinted sheet glass fixed with rubber / aluminium snap beading including joining cleats, glazing clips, screws etc, floor hinges, tower bolt 200 mm size, mortice lock 100 mm size 4 lever, round handles etc and fixed in opening with PVC ravel plugs & screws of appropriate size and making good the disturbed surfaces to match the existing complete all as specified and directed by Engineer-in-Charge.

S&F aluminium anodised windows frame with sliding type shutters (3 track shutter type) without sash bars with and including using anodised aluminium sections as given below with and including 5 mm thick tinted sheet glass fixed with rubber / aluminium snap beading including joining cleats, glazing clips, screws etc and suitable aluminum fittings such rollers, handles with locking arrangement complete all as specified and directed by Engineer-in-Charge. (i) Frame of window / Ventilator - 63.5x38x1.5mm (ii) Top & bottom rails of shutter - 39.40x17.76x1.5mm thick (iii) Interlock section of shutter - 38.40x17.70x1.5mm thick (iv) Top & bottom sliding track - 61.60x31.75x1.5mm (v) Anodised aluminium handle of section 29.40x17.70x1.5mm thick (vi) Anodised aluminium joining cleats of size 25x25x3mm thick

S&F anodised aluminium grill decoraive type, weight not less than 2.50 Kg/Sqm, fixed to aluminium window./ ventilator frame with aluminium fillets of size 25mmx3mm including screws etc complete all as specified and directed.

S&F 5.5 mm thick sheet glass ordinary quality and glazing with rubber beading to aluminium frame in square n.exc 0.5 sqm each pane complete all as specified and as directed by Engr-in-Charge

S&F stainless steel wire netting 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples to aluminium frame complete all as specified and directed.

M&L for mild steel work as in guard bars to windows and the like, plain, let in and fixed independently in wooden frames, L or T Section support for shelves and similar articles conforming to Fe-290 Gde E-165 complete all as specified and as directed by Engr-in-Charge.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubish of the premises complete all as specified and directed.

M&L for glazed ceremic coloured tiled of size 350x250x7mm/ 450x350x7mm thick, laid in vertical surfaces over and including 10mm thick rendering in cement mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick (Square/rectangular), area of each tile exc 0.11Sqm but n.exc 0.18 Sqm, laid in flooring over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engr-in-Charge.

M&L for vitrified ceramic tiles light shade 10mm thick (Square /Rectangular), area of each tile n.exc 0.36 Sqm, laid in flooring over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by the Engr-in-Charge.

Dismantling stone slab and tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and directed by Engr-in-Charge.

M&L for 60mm thick machine pressed precast concete interlocking paver block of any shape and size conforming to IS-15658-2006, made of M-35 grade cement concrete with grey cement and pigment complete all as specified and directed by Engr-in-Charge

M&L sand filling under floors, cushioning for laying interlocking paver blocks or in foundations including watering and consolidation complete all as specified and directed.

Taking down cement or cement lime plaster on brick / stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 10mm thick rendering incement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls, providing 1mm thick layer of wall care putty and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over one coat of alkali resistant primer on external surfaces of walls complete all as specified and directed.

M&L for complete removal of existing decorative treatment of any description and applying two coats of cement base paint over a coat of alkali resistant primer on external surfaces of walls cmplete all as specified and directed.

M&L for preparation of old surfaces applying two coats of Appex paints on projection surfaces of coloumn,facia ,fin of chajja etc complete all as specified and directed.

S&F in repairs, vitreous china coloured EWC with integral flushing cistern and seat cover complete all as specified and directed by Engir-in-Charge. Make-Jaquar (Solo) Complete Set Constellation-Couple closet, cistern, seat cover (PP) Cat No. SLS-WHT-0916BS, SLS-WHT-1306, ZPS-WHT-1019 or equivalent make as approved by GE

S&F in repairs, decorstive WHB with padestal including PVC connection pipe etc, necessary fittings and fixture complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Aria) Cat N0. ARS-WHT-0615W or equivalent make as approved GE

S&F in repairs, 15mm bore CP flushing jet spray for EWC with 1 m long PVC tube complete all as specified and directed. Make - Jaquar Essco Cat Part No. ALE-ESS-547 or equivalent of approved make.

S&F in repairs, vitreous china wash hand basin, white, flat back, size 550 X 400 mm (excluding tap, chain and plug and procelain stopper) including brackets, cutting for pinning in ends of brackets or erecting stand and waste coupling and waste pipe (half or full thread) (min weight 32mm-45 Gms/40mm-60Gms) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs, vitreous china squatting pan, Orissa pattern, size 580 X 440 mm white, with integral foot rests (excluding cistern and flush pipe) including connection to trap, and to flush pipe, anti-syphonge pipe and trap set in lime concrete etc and making good the disturbed surfaces to match existing flooring complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repairs, viterious china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply only coloured plastic water seat, black, closed pattern with flat bottom and cover and mild steel CP or aluminisied hinging device complete all as specified and directed. Note: Fixing charges are included in Sl item No. 38.00 above.

Dismantling of water storage tank of capacity exc 250 but n.exc 500 ltrs and removing to store and S&F new 500 ltrs capacity rotational moulded (three layered) polyetheylne water storage tank, cylindrical vertical with closed top, hoisted and fixed in position with and including cover complete all as specified and directed by Engr-in-Charge.

S&F in repair, 20 mm bore PTMT ball valve (Minmum weight 210 gms), high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge..

Taking down galvanised tubing of 15 mm dia bore including cleaning for refixing in any position and S&F 15 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

Taking down galvanised tubing of 20 mm dia bore including cleaning for refixing in any position and S&F 20 mm doa bore medium grade galvanised steel tubing with all fittings and fixed to walls and ceiling or laid in floor including MS hooks as required complete all as specified and directed by Engr-in-Charge.

S&F in repair, stainless steel kitchen plate rack of size 750 x 900mm, fixed to wall complete all as specified and as directed.

S&F in repair, stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, made of 1 mm thick stainless steel sheet with plug washers and wastes, including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.

Demolition of brickwork or stone boulder masonary built in cement mortar or cement lime mortar including all pillars, arches etc complete all as specified and directed by Engr-in-Charge.

M&L for brickwork with old size sub class 'B' bricks in cement mortar (1:6), straight or curved on plan exc. 6m mean radius complete all as specified and directed by Engr-in-Charge.

Dismantling AC (corrugated or semi corrugated) / fibre glass translucent sheet form the roof coverings complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantling 40 sqcm and over in section, fixed in any position complete all as specified and directed by Engineer-in-Charge..

M&L mild steel work in tubular trusses, railing, grills etc including special shaped washer etc using ERW or induction butt welded tubes complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.50 Cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken earth or broken rubble mixed with earth around in layers n.exc 25cm, watering and well ramming and removing surplus soil to a distance n.exc 50 m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete or in base of posts /columns etc complete all as specified and directed.

S&F rolled mild steel work in doors or gates of angle or other sections with gusset plates, rafters, rails, braces etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc conforming to Fe 410 Gde 250A.complete all as specified and directed.

M&L for mild steel screw bolts (machine made) 11 to 15 mm dia, exc 5 cm but n.exc 10 cm long with hexagonal or square heads at one end & screwed the other end,or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut complete all as specified & as directed.

S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 Gde E-165 complete all as specified.

S&F 6mm thick Asbestos Cement, corrugated or semi-corrugated sheets in roof covering or wall cladding etc, fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa fixed in roof covering/ wall cladding with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa fixed in ridge and the like with self tapping screws as specified and directed.

M&L for 20mm thick granite stone (of any type) tiles, machine cut, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade including grinding and polishing complete all as specified and directed.

Dismantling welded steel wire fabric n.exc 4.00 Kg/Sqm /expanded metal of any thickness or mesh size, fixed with steel or wood fillets if any complete all as specified and directed.

S&F welded steel wire fabric n.exc 4.00 Kg /Sqm, fixed with to wooden or steel members complete all as specified and directed by Engr-in-Charge.

S&F in repairs, 25 mm dia bore with 1mm wall thickness mild steel PVC coated, fancy type curtain rod, fixed in any length complete all as specified and directed by Engr-in-charge.

S&F mild steel fancy type bracket and end knobs (lattoo) for 25 mm dia curtain rod complete all as specified and directed by Engr-in-charge.

S&F in repairs, 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed by Engr-in-Charge

Dismantling wall & celling boards (fiber pulp insulation etc) or insulation boards /slabs / blankets of any thickness including cover fillets complete all as specified and as directed by Engr-in-Charge.

S&F 5 mm thick PVC wall lining consisting of wood grain PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing complete as directed by Engr-in-Charge.

S&F 30mm thick perprelam perforated PVC false ceiling panel made of 5mm wall thickness PVC perforated sheet of size 600x600mm on glass wool. 5.00mm (+ 0.25 ) prelam perforated PVC sheet of density 600Kg / cbm manufactured by an ISO -9001-2015 certified company, stuck with glass wool on one side with suitable adhesive. The panel is inserted in & including grid frame made of anodised Aluminium of GI 'T' section of size 1"x1" (25mmx25mm) in square type grid of size 2'x2' (600x600mm). The aluminium / GI Frame work is supported from the ceiling with the help of 'J' hook and GI wire / 6mm MS rods of required sizes to maintain proper level .The aluminium /GI frame work is supported on side wall with the help of aluminium GI "L" section of size 1"x1" (25mmx25mm) angles complete as per manufacturer's instructions and specification and shown on drawing and directed by Engineer-in-Charge.

M&L for 304 grade stainless steel railing using hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature as required at site and fitting the same with necessary stainless steel nuts and bolts including all necessary accesories complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L 75 mm PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in panels n.exc 2 Sqm each complete all as specified and directed by Engr-in-Charge.

S&F 5mm thick PVC sheet fillet 35mm wide for wall paneling inclusive of fixing to wall to make PVC Frame as per specification and drawing.

Saket Traders

JAI MAA VINHYAVASANI CONSTRACTION CO

JYOT BUILDERS

Jairajyadav security services

R K BROTHERS