Additional improvement work for Sanitary Inspector ward Office in existing room at VOC colony in Ward No 98, South Zone

Amount

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc. complete as per direction of departmental officers

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

FLY ASH Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Refilling the excavated earth including watering and consolidation layer by layer with all incidental charges etc complete

Filling with Well Gravel including watering and consolidation layer by layer with all incidental charges etc complete

Plastering for brickwork surfaces using cement mortar 1:5 (One part of cement, Five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation fin walls, manholes, inspection chambers, entrance & staircase steps etc., finished smoothly to one level including scaffolding, curing etc., complete, at all leads and at all heights.

Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block size 83mm thick to be laid in lorrying bone pattern with approved non sticking surface in the top and the rate including leveling thebase, preparation of subbasewith sand cushion100mmthick, laying out thepavement, cut thepieces to fit theedge, vibrating thepavers, sweeping thesand grouting, providing transporting, loadingunloadingand layingofpaverblockas per standard specification.

Supply and fixing of mild steel for Trusses and record rocks using all round angle with necessary arrangements including cost of steel and labour charges for welding etc., complete

Roofing with Pre painted Galavalume sheet 0.47mm thick with necessary bolt and nuts and washers including allmaterials and labour charges etc complete - 10m2

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Supplying and fixing in position indian make colour water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brickjelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. . (D)

Supplying and fixing in position European Water Closet with “P” or “S” Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.50 litre capacity Porcelain Low Level Flusing Tank with all internal fittings

Supply and Fixing of Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300W regulator with 300mm down rod on the existing clamp

Supply and fixing of 20W 4 feet LED Fitting complete with suspension from the ceiling with PVCunsheathed copperleads from terminals to the fitting

Supplying and fixing of 30 W LEDStreet Light fitting completed

Supply and erection of 1000 litre HDPE water tank with water supply connection etc complete

Supply and fixing of WT Bulk head fitting with guard ( Philips / Bajaj / Crompton / K.lite ) suitable for incandescent lamp with 60 watts bulb. ( SD 83)

Supplying and fixing Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter.

Supply and Fixing of 1HP Motor with pumpset as per Standard Quality as per the Direction of the Departmental officers etc., complete.

Supply & Fixing of Capacity System with 150ah battery-2 hours backup Single phase

Supplying and fixing of 1kva UPS Invertor

Supply & Fixing of office wooden table

Supply & Fixing of office S type chair

Supply and fixing of following Plumbing G.I.materials as directed by Corporation officers.

110mm pvc pipe

25mm pvc pipe

25mm upvc pipe

110mm pvc elbow

110mm pvc Tee

110mm pvc bend

110mm pvc doorelbow

25mm CI tap

25mm PVC Elbow

25mm PVC Tee

25mm dia valve

25mm UPVC Elbow

25mm UPVC Tee

Fixing name board including lettering and painting as per the direction of the departmental officers etc., complete

Add :- GST @ 18%

M RAMARAJ (BID ID -1468910)