Construction of Additional Meeting room at South Zonal office Back side in Ward No.92, South Zone.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.2018 and Sand, silt or other loose soil, wet sand.or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc..complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and Eight part of coarse aggregates) using 40mm size ISS IBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Providing cast in situ cement concrete 1: 11/23 (one cement, one and Bali M.Sand and three coarse aggregate) using 20mm size HBBG metal for 30cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 30cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement (Data for 4.50 RM)

Centering for soffits of RCC slabs of plane surface like me, anchuding strutting in 3M high swing mild steel sheets of size 90CM X 60cm X and BG 10 stiffened with M.S angles of size 2.5mm X 25eus X 3mm laid over silver Oak (CW) joists of size 10cm X 6.5cm (spaced at about 90cm ec vnd supported dy casurina props of 10cm to 13cm dia opaced of 75cm CC complying with standard specification and directed 10 m2

Suppling and fabricating and placing in position MS (or) RTS bur for 21.50orcement to aif RCC works as per the design given including cost of steel and binding wire also in all floors

Reinforced Cement concrete 1:15:3 (one cement, one and half M sand & three course aggregate) using 20mm gauge hand broken and broken eranne stone for all RCC items of works excluding centering shuttering and cesst of reinforcement but including curing etc complete and also listing fixing tan clamps and fixtures in ree works wherever necessary jas directed by departmental officer etc., complete

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc.. complete complying with standard specification.

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") including cost of materials and haboor charges etc., as per standard specification - 1m3

Supplying grill windows & Ventilators including cost of steel and labour charges for welding ete..complete

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 land without any air gap in the tiles neatly and fixing in position as per standard spécifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work.

Dadooing walls with ceramic tiles of sizes 300mm X 450mm X 8mm size of approved make and quality and colour Set in cement mortar 1:2 (Onc part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc.complete as per standard specifications.

Wiring with 2x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor cable of 1100 V grade insuitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and SAFI switch with painting of suitable colour continuous earthwire connection of 1.5sq.mm copper wire t for concealed light/fan point SD 01

Wiring with 2x1.5sq.mm. PVCinsulated singlecore unsheathed FRLScopper conductor cable of 1100V grade insuitable heavy gauge MS conduitpipe onwall and ceiling with MS accessories with 150mmx100mmx75mm MSswitch box for 5A3 pinnon interlocking flush type CSplug with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open plug point

Supply and run of 2of4sq.mm. PVC insulated SC unsheathed FRLS copperconductor of 1100V grade insuitable heavygauge MS conduit pipe concealed in wall and ceiling with continuous earthwire connection by 4sq mm copperwire and making good of the concealed portion wiith suitable colour SD 45

Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed Cll Condutor of 1100V on 720 GI bearer Wire for service connection Mains, SD 66

Supply and fixing of WT bulk head fitting suitable with guard and 15 W (100W) LED bulb (SD 85)

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat mcluding preparing the surface, clean removal of dirt and including 172 necessary plaster of paris putty wherever required etc., complete complying with standard specification. (Sl. No.395)

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the 16 cost all materials etc. complete, in all floors.

Supply and fixing of 1200mm (48")AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

Supply and fixing of single box type 4"40W fluorescent fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube.

Supply and fixing of 4'40W twin streetlight fluorescent fitting complete with copper choke and condensor with 32mm dia Glpipe(Class'B')with INo.32mm Glbend complete on the existing post/wall with 16Aaerial fuse unit on MSplate with PVC unsheathed copper leads with MS clarups and aluminiuia painting with fluorescent tubes.

Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated Panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 333mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) conforming to IS 12436 having density not less than 40+2Kg/M3. Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as 1. flashing, C flashing etc & accessories such as screws, fastners sealants etc for fixing the panel etc., complete complying with standard specification. (60mm (+38mm) thick PUF roof panel)

Fabricating supplying and fixing of pre painted galvanium colour sheets with the folowing specification. The materials should be of PPGI tile profite with a red colour or any other Approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.L.base pre painted hot dipped galvanized iron sheet and to be fixed with shell tappingscrews.plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120GSM paint thickness the finish should be terra cotta finish like malabar mangalore ties finish optional matt finish. The sheet to be fixed with making suitable corrugated.cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Petty Iron works for Truss, straps including cost of steel and labour charges for welding etc.. Complete

Iron works for Trusses and Record racks including cost of steel and labour charges for welding etc.. complete

Supply and Fixing of Office Table including cost & convence of all materials and labours etc.. Completed as per standard Specification

Supply and Fixing of Chairs including cost & convence of all materials and labours etc., Completed as per standard Specification