Repair and Maintenance of Govt High School Bakhol C/O Boundary wall

Earth work in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto all leads , dressing of sides and bottom and back filling in trenches with excavated suitable material in ordinary soil upto all depth. as directed by the Engineer-in-Charge.all useful material such as stone, shingle, aggregates& slate etc. shall be sorted out and stacked along the road side properly. Any loss to the public and private property to during the course of execution shall be the absoulte responsibility of the contractor which shall have to be duly compensated by him in all cases.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 40 mm nominal size)including hauling of material in all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

Steel work welded in built up sections/framed work, including cutting, hoisting, foing in position and 4 applying a priming coat of approved steel primer using structural steel etc as required including carriage of materials in all leads and lifts by mechanical or manual means.

Providing pre-painted G.S. sheet roofing(TATA MAKE or its equivlent as approved by the Engineer) including vertical / curved surface fixed with polymer coated Jor L hooks, bolts and nuts and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and 8 mm diameter with bitumen two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including carriage of materials in all leads and lifts by mechanical or manual means. (i) 0.60 mm thick with zinc coating not less than 275 gm/m

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied 6 @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture