GE(S)/M-42/2023-24

Amount

Resecuring or easing & adjusting existing wooden/jali shutter exc 1.0 Sqm but not exc 2 Sqm in same or other opening after repair, complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 Sqm but not exc 4.0 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames with shutter not exc 1.5 Sqm each (without taking off shutters from the frame), complete all as specified and directed.

Taking down shutters of any description area n.exc 1.0 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composit) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single extruded WPC (Wood Polymer Composit) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) having minimum density of 650kg/cum, and screw withdrwal strenght of 1800N (face), 900n (edge), minimum compressive strength 50 N/Sqmm , modulas of elasticity 850N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixing with stainless steel butt hinges of rerquired size with necessary full body threaded star headed counter sunk SS screws all as specified and directed . Note :- i) stainless steel butt hinges and necessary SS screws shall be paid separately). ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 45 x 70mm comprising of vigin PVC polymer of K value solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single or double extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 100mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F factory made single or double extruded WPC (Wood Polymer Composit) solid door/windows/ceosetory windows & other frames/chowkhat of size 50 x 125mm comprising of vigin PVC polymer of K value 58-60 (suspension grade), calcium carbonate & natural fibres (wood powder/rice husk/ weat husk) and non additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with fully body threaded star headed SS screws having minimum frame density of 750kg/cum, screw withdrwal strenght of 2200N (face), 1100n (edge), minimum compressive strength 58 N/Sqmm , modulas of elasticity 900N/sqmm and resistence to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retrdant and fixed position MS hold fast/lugs/SS dash fasteners of required dia and length (MS hold fasts/lugs or SS fasteners shall be paid separately) complete all as specified and directed Note :- i) WPC solid door / window frames minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable but no extra payment on this account shall be made.ii) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

M&L for 35 mm thick single piece factory made wire gauge door shutter incl of wire cloth stainless steel wire cloth 0.36mm dia of wire with 1.4mm aperture and aluminium XPM of 0.78mm dia having 10mm x 10mm size, manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.

Providing and fixing of ventilator (area n.exc 0.5 sqm) made of pre-painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coated with epoxy primer of 5-7 micron thick finish painted with polyster paint 12-16 micron thick and back coated with 5-7 micron thick alkyd backer section for outer frame should be 72x55mm, centre mulion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm, outer frame and mullion section to have rebate for glazed shutter, fly proof mesh and 20mm provision for guard bar/grill fly prrof mesh shutter section should be of 20x40mm. The section are to be cut to length mitre joined with corner bracket, centre mullion to be fixed with mullion cap, Elixir or equivalent stay, handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter. The window should be panelled with 4mm thick plain float glass and SS mesh for fly mesh shutter 304 grade, rubber gasket are provided all around the glass. The above frame should be fixed to the concrete / masonary wall by means of self expandid screws including 10mm square guard bars with 152.4mm pitch, complete all as specified and directed

Providing and fixing of window (area exc 0.5 sqm) made of pre-painted steel (base steel as per IS 513 of 0.56mm thick D quality galvanized as per IS 277 with zinc of 120 GSM), primer coated with epoxy primer of 5-7 micron thick finish painted with polyster paint 12-16 micron thick and back coated with 5-7 micron thick alkyd backer section for outer frame should be 72x55mm, centre mulion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48x25mm, outer frame and mullion section to have rebate for glazed shutter, fly proof mesh and 20mm provision for guard bar/grill fly prrof mesh shutter section should be of 20x40mm. The section are to be cut to length mitre joined with corner bracket, centre mullion to be fixed with mullion cap, Elixir or equivalent stay, handle 2 nos of heavy duty stainless steel pivot hinge shall be provided per shutter. The window should be panelled with 4mm thick plain float glass and SS mesh for fly mesh shutter 304 grade, rubber gasket are provided all around the glass. The above frame should be fixed to the concrete / masonary wall by means of self expanding fastner not less than 75mm long including 10mm square guard bars with 152.4mm pitch, complete all as specified and directed

S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed

S&F for Mild steel, 200mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door frame complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 125mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, (ISI marked), complete all as specified and directed.

S&F 100mm long butt hinges, stainless steel, heavy duty with stainless steel hinges pin complete with full body thread star headed counter sunk S.S. screw complete all as specified and directed.

S&F pre-laminated lead free factory made 18mm (+ 0.7mm) thick 100% solid WPC (wood polymer composite) sheet having high natural fibre content 25 to 30% wood colour sheets having density not less than 600Kg/cbm and should be 100% termite/water proof, fire retardant, Eco friendly, finish at all edges for making edges lipping/bending, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete all as specified and directed. Note :- i) Material manufactured by MES approved firms / ISI approved firms shall only be used in the work. IS certificate alongwith MTC to be produced before execution of work.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised 40mm width of flaps (when open), complete all as specified and directed.

M&L for hasp & staple 125mm in size, aluminium anodized, including bolt to hinge plate and fixed with screws. complete all as specified and directed.

M&L for stainless steel handles bright finish of size 100mm long ISI marked complete all as specified and directed.

S&F ball catcher with proper magnetic effect fixed with shutter, complete all as specified and directed.

S&F 20mm bore stainless steel curtain rod with 1mm thick wall thickness including a pair of stainless steel brackets and knobs with each length/piece fixed on doors and windows opening for hanging curtains complete all as specified and directed.

Taking down existing cement plaster including grit plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L for 10mm thick rendering on faces of brick work or concrete surfaces of walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on fascia or edging of chajjas, ceiling and roof projections etc.,including taking down existing cement plaster at any height on brick walls or stone walls of any description etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling/roof projection and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall and applying two coats of cement base paint over a coat of alkali resistant primer including curing, complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distamper over a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation of old surfaces of walls including washing down, rubbing, brooming down with wire brush scrapping down smoke, roots, moulds, salts and treading oil and greasy spots and applying one coat of washable distemper, white or tinted incl removing nails etc & making good disturbed surface, complete all as specified and directed.

M&L for additional one coat of washable distemper, on walls complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, complete all as specified and directed.

M&L for brick masonry (EXCEPT BRICKS) straight or curved on plan exc 6 Mtr mean radius, built in CM 1:6, complete all as specified and directed.

Demolition of existing brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, including removal of deberies out of MoD land complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 300mm x 7mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including rendering 10mm thick in CM 1:4 and finished rough to receive tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.11 Sqm but not exc 0.38 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick, area of each tile exc 0.18 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed (joint free) in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed.

S&F for GI pipe 32mm bore light grade (in short length) as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1:2:4 type B-1 complete all as specified and directed.

M&L for 10mm thick rendering or plastering work in CM 1:3 on brick or concrete surface of sunken floor finished even and smooth using WPC liquid of make as approved by GE @ 0.200 ltr in 50 kg of cement as per manufacturer instruction complete all as specified and directed. (Note: WPC shall be measured and paid separately).

M&L for bitumen blown any grade, applied hot two coats to concrete/plastered surfaces @ 1.5 kg per sq.m per coat and applying polythene film black, 50micron complete for sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.

Supply only liquid water proofing compound make as approved by GE complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.50mm graded crushed stone aggregates) as in sub base floors for laying floor finish complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in sunken floor etc., complete all as specified and directed.

S&F in repair 75 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor or wall with lead joints complete all as specified & directed.

S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating complete all as specified & directed.

S&F in repair 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

S&F in repair 75mm bore dia CI branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access door ISI marked complete all as specified & directed. (Lead joint shall be measured and paid sepatrately).

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.

S&F "as in repair" 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) door bend, including jointing with solvent cement, complete all as specified and directed.

Taking up or down steel tubing of 15mm bore existing pipes complete all as specified and directed.

Taking up or down steel tubing of 20mm bore existing pipes complete all as specified and directed.

M&L for 15mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L for 20mm bore water tubes 'medium grade' galvanised with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed.

Refixing of old steel tubing 20mm medium grade galvanized ISI marked with all fitting short piece and fixed complete on walls complete all as specified and directed.

Fixing only in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 180mm complete all as specified and directed.

S&F "as in repair" Vitreous china squatting pan of 'Orissa pattern' of size 580mm x 440mm, white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests of any pattern (including fixing of flush pipe) and connecting etc. including provision of cement concrete bedding, complete all as specified and directed.

S&F "as in repair" vitreous china wash down water closet pan (pedestal pattern), white including plastic white cover closed pattern with flat bottom and mild steel chromium plated hinging device including connections to drain or outgoing pipe and to flushing pipe anti syphonage pipe etc, complete all as specified and directed.

S&F "as in repair" Vitreous china wash basin, white flat back of size 550mm x 400mm including 32mm size CP waste coupling full thread and 32mm dia PVC waste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and directed.

S&F "as in repair" chromium plated tubular towel rail, 20mm dia 'D' type, 60cm long between flanges, complete all as specified and directed.

S&F "as in repair" PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F "as in repair" 15mm bore stop/angle valve, with flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F "as in repair" 15mm bore (concealed type) stop valve, with long flange cast copper alloy (ISI Marked), chromium plated screwed down, high pressure with capstan head, screwed both ends, complete all as specified and directed.

S&F soap dish cantabile-clea(material SS finish, glossy) fixed to plugs with CP brass screws, complete all as specified and directed.

S&F "as in repair" CP brass shower rose of size 200mmx200mm with swivel arm 375mm long of stainless steel/CP brass, including fixing to steel pipe or union complete all as specified and directed.

S&F "as in repair" 15mm bore bib tap with flange, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

M&L for coloured machine pressed precast rubber moulded concrete interlocking (red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50 mm thick screened river washed sand cushion, complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 20mm graded crushed stone aggregates) as in sub base floors for laying floor finish complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.

Demolition of (unreinforced) cement concrete in floors and pavings of any thickness (below or above ground level ) complete all as specified and directed.

M&L for 15 mm thick green marble (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite laid over and including Screed bed or bedding layer of mortar 15mm thick for laying floor in CM 1:4 finished even & rough to receive top layer, complete all as specified and directed.

S&F stainless steel peg set of six of size 400x30x3mm fitted with machine screws and wooden and plastic cleats complete all as specified and directed.

S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed.

M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:6, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Demolition of reinforced cement concrete of any description & in any position not otherwise specifically provided for all as specified and directed.

M&L for 50mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in floor finish the surface even & smooth without using extra cement incl making joints at every 2.00 Sqm in each panel complete all as specified and directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (ISI marked) of any colour having tensile strength of 550 Mpa to replace the existing PVC sheet and sunshades with nut & bolts/rivets etc complete all as specified and directed.

M&L for sand faced plaster as specified over rendering coat of 10mm thick in CM 1:4 mixed with liquid water proofing compound on brick or concrete surfaces complete all as specified and directed upto 3rd storey building complete.

M&L for roof repair by cleaning the brick tiles on roof top incl removing all growth & waste material by applying wire brushing including racking out joints, hacking for key, scrubbing down with water etc.,and applying flush pointing to brick tiles on roof top with CM 1:3 mixed with water proofing compound as per manufactureres instruction complete all as specified and directed. (WPC shall be measured & paid separately)

M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed, complete all as specified and directed.

M&L for taking down the water tank of any description placed on roof top and refixing in same or other position after cleaning properly and refixing new old obtained GI pipes, float valve and other fittings complete all as specified and directed.

M&L for repair to existing steel gates by ease and adjusting, greasing, oiling etc complete including replacement of existing hinge by projected type heavy duty T hinges making good the disturbed surface by filling PCC, 1:2:4 type B-0 and finally applying one coat of synthetic enamel paint complete all as specified and directed.

AV ENTERPRISES

Abrol construction co

WALIA ENTERPRISES

VOHRA CONSTRUCTION CO

Bidder Name

Abrol construction co

WALIA ENTERPRISES

AV ENTERPRISES

M/S TARA CHAND CONSTRUCTION CO.

VOHRA CONSTRUCTION CO