Construction of Power Room for metering panel Board for Tenement Blocks A B C D1 D2 at Chinnapoigai nagar Arunthathipuram pondicherry third call

Amount

CODE NO.2.8.1: Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil

CODE NO.2.27: Supplying and filling in plinth with river sand under floors, including watering ,ramming consolidating and dressing complete

CODE NO.4.1.10: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)

CODE NO.6.1.1: Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in - cement mortar 1:4 (1 cement : 4 coarse sand)

CODE NO.5.2.2: Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

CODE NO.4.3.1: Centring and shuttering including strutting , propping etc. and removal of form work for - foundations, footings, bases for columns. - Using steel sheet with M.S.frames

CODE NO.6.4.2: Brick work with F.P.S bricks of class designation 35 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 coarse sand)

CODE NO.5.9.3:Centering and shuttering including strutting , propping etc and removal of form for – Suspended floors, roofs, landings, balconies and access platform - Using steel sheet with M.S.frames

CODE NO.5.3.: Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases upto floor five level excluing the cost of centering ,shuttering, finishing and reinforcement , with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)

CODE NO.5.22.7:Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

CODE NO.13.16.1: 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

CODE NO.13.8.3: 12 mm cement plaster of mix 1:5 (1 cement : 5 fine sand)

CODE NO.2.27D.1: Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth , breaking clods, watering , rolling each layer with 1/2 tonne roller , or wooden or steel rammers , including all leads and lift etc., complete for making play fields , running trees and court yards

CODE NO.11.3.1: Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc .complete - 40mm thick with 20mm nominal size stone aggregate

CODE NO.15.2.1: Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c quivalent design mix)

CODE NO.10.25.2: Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and pplying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works

CODE NO.13.50.3: Applying priming coat - with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron / steel works

CODE NO.13.61.1: Painting with synthetic enamel paint of approved brand and manufacutre to give an even shade - Two or more coats on new work

CODE NO.13.37.1: White washing with lime to give an even shade - new work (three or more coats)

CODE NO.13.43.1: Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer

CODE NO.13.46.1: Finishing walls with acrylic smooth exterior paint of required shade - New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm

CODE NO.13.3.1: 20mm cement plaster of mix -1:4 (1 cement : 4 fine sand)

CODE NO.2.25: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

CODE NO.13.2.1: 15mm cement plaster on the rough side of single or half brick wall of mix - 1:4 (1cement : 4 fine sand)

P Baskaran