CONSTRUCTION OF BOUNDARY WALL GHOGHAR KUTHI PRIMARY SCHOOL UNDER GHOGHARKUTHI PRATHAM KHANDA WITHIN COOCH BEHAR Z.P. SL4

Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necessary trimming thesides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.Depthof Excavation not exceeding 1.5 m

arth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

(I) Cement concrete with graded stone ballast (35 mm size excluding shuttering) (1:3:6) In ground floor

Brickwork in cement morter (6:1) with 1st class brick in foundation and plinth

125mm thick brick work in cement mortar (4:1) in ground floor

Nominal Mix-20 Cement concrete(1:1.5:3) with 20m m. down well-graded river bazree excluding shuttering and reinforcement.

M.S. Tor steel reinforcement (for R.C.C. work) including distribution bars, stirrups, binders etc. including cost of bars initial straightening and removal of loose rust if necessary cutting to requisite length, hooking and bending to correct shape

Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting

Hire and labour charges for shuttering with entering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns,lintels curved or straighting,AVOVE PL

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (ground floor)20MM

Plaster (to wall, floor, ceiling etc.) with sand and cement morter including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surfece, including throating, nosing and drip course wherer necessary (ground floor),10MM

Neat cement punning about 1.5mm thick in wall dado, window, sills, floor, drain etc.

Applying Decorative cement based paint of approvd quality after preparing the surface including scraping the same thoroughly Two Coats

M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge. In ground floor

Priming one coat to timber or plaster or on steel surfaces with ready mixed primer of approved quality including cleaning and smooth finishing surface.

Painting with best quality synthetic paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary.

Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (Payment to be made on the basis ofmeasurement of finished quantity of work)

M.S. structural works in columns, beams etc. with simple rolled structural members ( e.g. joists angle , channel sections conforming to ...direction of E.I.C.---- all incidental charges such as electricity charges,labour insurance charge etc.

,Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on ... EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:- a) With 0.5 mm thick sheet

Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way (a) With 0.60 mm sheet

Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with.....(The rate is inclusive of cost of reinforcement, concrete, shuttering, nuts & bolts, washer etc. complete.)