SPECIAL REPAIRS AND ADDITION ALTERATION TO BLDG NO P 110 OF TB I BLDG NO 159 E E1 PROJECT WHITE LILY AND K BLDG AT 512 ABW UNDER GE CENTRAL KIRKEE

Amount

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any cement mortar complete all as specified and as directed.

Material and labour 25 mm thick plain cement concrete (1:2:4), type B-1 using 20mm crushed stone aggregate as in leveling course complete all as specified and as directed.

Material and labour non skid ceramic coloured tiles joint free, 7 to 8 mm thick (square or rectangular) area of each tile exc. 0.11 sqm but n.exc. 0.18 sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, over and including screed bed or bedding layer of mortar in cement mortar (1:6) 15 mm average thickness for laying floor finishes ,complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Material and labour non skid ceramic coloured tiles joint free 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm (400X400X7mm) as in skirting, over 10mm thick rendering / backing coat in CM (1:4) on walls set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)2

Material and labour coloured non skid ceramic tiles 300 mm x 300 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement set and jointed with neat cement slurry including pointing in white cement with pigment to match the shade of tiles, ver and including screed bed or bedding layer of mortar in cement mortar (1:6) 15 mm average thickness for laying floor finishes complete all as specified and as directed. MAKE:-SOMANY (MARVELA) / JOHNSON / KAJARIA (POLISHED SERIES)

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour Glazed ceramic colour tiles in vertifical surface 450x350x7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick rendering / backing coat in cement mortar 1:4 complete all as specified and as directed. MAKE:-SOMANY / JOHNSON / KAJARIA

Material and labour rendering 10mm thick on brick or concrete surfaces on walls in CM (1:3) mixed with and including supply of approved integral liquid water proofing compound as per manufacturer's instructions in sunken portion complete all as specified and as directed. NOTE :- Rate for WPC to be deemed to be included in the quoted rate.

Material and labour plain cement concrete (1:5:10), type E-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete as in sub base of floors complete all as specified and as directed.

Material and labour guniting with cement and coarse sand mortar in (1:3) ratio injected under a pressure of 2 to 3 Kg/Sqm from a cement gun on RCC surface, after removing plaster, RCC surface shall be rougned by hacking about 6 mm deep at a close interval not greater than 10 mm c/c (average) including opening all cracks upto maximum posssible depth in V form including removing / cleaning of all loose surface loose deteriorated concrete, all corroded reinforcement shall be cleaned properly to remove all the scales and rust by wire brush, rubbing with sand paper, a coat of Zinc primer shall be applied as per manfacturers specifications to the reinforcement after cleaning, epoxy bonding agent (NITOBOND EP of FOSROC or equivalent) shall be applied to suitably prepared old surfaces at the earliest possible with in the 'open time' of epoxy bonding agent, the approx thicknes of quantity shall be 40mm-60mm for walls, columns and balconies/facia/cupboards and 25-30mm for soffits of slabs & beams,complete all as specified and as directed. NOTE :- Rate for necessary scaffolding deemed to be included up to height of 4 storey building.

Material and labour repairing the leaking deteriorated and torn out chajja and parapet walls by removing all the loose material from the top of the chajja be means of light hammering and chiselling, romoving loose concrete up to cover only and clean all loose particles by high pressure jet water so that all surfaces should be sound,clean and free of contamination followed by application two coats of polymerised cementitious coat like pidilites Pidifin 2k or equivalent, while second coat is wet apply a 10 mm dash coat of CM plaster with the waterproofing compound o make Dr.fixit or equivalent as approved by GE, completeing the repair work by final finishing and providing proper slope of 15 mm thick rendering to prepared surface in cement mortar (1:4) surfaces finshed even and smooth using extra cement including supply and mixing of water proofing compound as per manfacturer's instructions complete all as specified and as directed. NOTE :- Rate for necessary scaffolding deemed to be included up to height of 4 storey building.

Taking down chowkats and frame area n.exc 1.5 sqm each including shutters without taking off shutters from the frame and removing from site complete all as specified and as directed.

Taking down chowkats and frame area exc 1.5 sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 sqm but n.exc 2.00 sqm each and removing form site complete all as specified and as directed.

Supply and fix pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, including providing plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) to fill the frame & making good complete all as specified & as directed by Engr-in-Charge.

Supply and fix pressed steel door frame for doors of size 105 x 60mm with single rebate including necessary fixing lugs, hinges, lock strike plate, etc complete with and including hollow section of frame to be filled with plain cement concrete (1:2:4) type B0 using 12.5mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge.

Supply and fix 35 mm factory made shutters of second class hard wood plain framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified & as directed by Engr-in-Charge.

Material and labour 35 mm thick factory made second class hard wood glazed/gauged and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified & as directed by Engr-in-Charge.

Supply and fix galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed complete all as specified and as directed.

Supply and fix 30 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and covered with decorative face on both sides veneer with lipping/frame to match complete all as specified & as directed by Engr-in-Charge.

Supply and fix 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & as directed by Engr-in-Charge.

Supply and fix in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed complete all as specified and directed.

Supply and fix mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate fixing in wooden or steel door frame using nails or welding complete all as specified and as directed.

Supply and fix 100mm long stainless steel medium weight but hinges for door shutter and frames/welded to frames complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and as directed.

Supply and fix aluminium handles 150 mm, fabricated type, anodised, fixed with screws, complete all as specified & as directed by Engr-in-Charge.

Supply and fix mild steel pressed handles, oval type, stove enamelled black of size 150mm fixed with screws or welded complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified & as directed by Engr-in-Charge.

Supply and fix in repairs 18-19mm thick prelaminated particle board prelaminated one side grade 2 quality interior grade commercial type including 6 mm thick teak wood lipping, as in cupboards shelf, kitchen cabinet, pelment box and in similar works complete all as specified and as directed.

Supply and fix factory made internal PVC door frame of size 50x47mm single revated made out of extruded 5 mm PVC foam sheet, mitre cut at two corners and jointed with 02 Nos of 150 mm brackets of 15x15 mm MS square tube. The two vertical door profiles are to be in forced with 40x20 mm MS tube of 19 gauge through out the frame complete all as specified and directed.

Providing and fixing 30mm thick FACTORY MADE MOULDED DOOR SHUTTER ‐ WOOD FREE consisting of frame made out of M.S. tubes of 19gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M. S. frame shall have a coat of steel primers. The inner panel shall consist of 25mm thick EPS of Density 23 Kg /Cbm. bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC Sheet Manufactured by an ISO‐9001‐2015 certified company, with 2, 4, 6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and /or prelam PVC sheet on other side of the EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton ( made by sticking 2mm rigid foam PVC sheets of 5mm (±0.25) thickness using PVC solvent cement ) and stile sides 25mm (5mm x 5nos.) thick and 30mm width PVC Sheet fitted along M.S. tube for hardware provision & for lock 25mm thick ( 5mmx5nos. ) PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc. complete all as per specification & drawing and as directed by Engineer-in-charge.

Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick plain float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc and making good the jambs and painting with existing surface matching complete all as specified and as directed by Engr-in-Charge.

Material and labour machine cut cudappa stone slab 20-25mm thick as in steps, jambs, pillars, window- cills, cooking platforms, and like over 15mm thick cement screed base in CM (1:4) and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing , polishing and rounding to edges including demolition of existing cill/cooking plat form complete all as specified and as directed.

Supply and fix aluminium louvered ventilators of section size 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge.

Supply and fix rolled mild stee as in frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified.

Material and labour for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Material and labour preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement or cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Demolition of brick /stone/block walls built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for precast cement concrete block masonry of grade C-5 having density not less than 1800 kg/Cum and 28 days average minimum compressive strngth of block should be 5 N/sqmm as in walling set in cement mortar 1:6 complete all as specified and as directed.

Material and labour for brickwork with fly ashbricks, straight or curved on plan exc. 6m mean radius, modular bricks in cement mortar (1:4) complete all as specified and as directed.

Material and labour rendering 12mm thick on fair faces of brick or concrete surfaces of wall in CM (1:6) complete all as specified and as directed.

Material and labour for 15mm thick cemet plalster in CM (1:4) over wall / concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. NOTE :- Rate for necessary scaffolding deemed to be included up to height of 4 storey building.

Material and labour 5mm thick rendering on concrete surface of ceiling in CM (1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour preparation of new plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-charge.

Material and labour preparation of old plastered wall surfaces and applying 3mm thick wall care putty to get smooth and even surfaces as directed and applying two coats of oil bound distemper complete all as specified and as directed by Engineer-in-charge.

Material and labour two coats of white wash on walls including preparation of old decorated surfaces complete all as specified and as directed.

Material and labour preparation of old decorated plastered or unplastered surfaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coats of cement base paint (white or tinted) complete all as specified and as directed.

Material and labour preparation of new decorated plastered or unplastered surfaces of wall, and applying two coats of cement base paint (white or tinned) over a coat of alkali resitant primer complete all as specified and as directed.

Material and labour applying three coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

Material and labour one coat of white wash on ceiling including preparation of old decorated surface and complete all as specified and as directed.

Material and labour taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore complete all as specified and as directed.

Material and labour taking up or down existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore complete all as specified and as directed.

Supply and fix 15mm bore galvanised iron water tubing, medium grade with all galvanised fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore galvanised iron water tubing, medium grade with all galvanised fittings and fixed complete to walls and ceilling or laid in floors complete all as specified and as directed.

Refixing 15mm or 20mm bore old steel water tubing and connection in new or old position (walls, ceilling, floor etc) complete all as specified and as directed.

Supply and fix in repair bib tap long body cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule for 15 mm bore of pipe complete all as per Prayag Cat Part No 8308 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bpre of pipe complete all as per Prayag Cat Part No 8310 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia pipe complete all as per Prayag Cat Part No 8304 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Material and labour PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix in repairs stop cock (concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screwed down, screwed both end for iron pipe or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as per Prayag Cat Part No 8318 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs chromium plated shower rose 100mm square with arm and flange including fixing to steel pipe complete all as per Prayag Cat Part No BS-30 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Material and labour vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and as directed.

Material and labour for vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and as directed.

Supply and fix in repair vitreous china wash down water closet pan size 655x370x770 mm (pedestal pattern) white with seat cover including flushing cistern,P/S Trap and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonage pipe etc and making good existing floor to match complete all as specified and as directed by Engr-in-Charge. MAKE :- Cera-Campbell- Cat No. S1021109 with P/S Trap, Cat No. S1060103 for Cistern,Cat No B1810113 Twin flush fittings and Seat cover Cat No.B1520167

Supply and fix in repairs Kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers & wastes including CI cantilever bracket & connection union to pipe over all size 915mmx460mm & bowl size 410 x330x160mm complete all as specified and as directed.

Supply and fix in repairs 32 mm bore PVC waste pipe 1000mm long of approved make suitable for WHB, Urinals etc all as specified and directed.

Supply and fix in repair PVC floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and as directed.

Supply and fix in repairs PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed.

Supply and fix in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screw and wooden / plastics cleats ( min wt 170 gms) complete all as specified and as directed.

Supply and fix in repair of 110 mm dia PVC (SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipes type 'B' single socketed in any length with rubberring joints laid in trenches or in floors and wall 75mm bore including taking down old unserviceable pipe any description and any type complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends 110mm dia type 'B' bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) bends 75mm dia type 'B' bore any radius with access door complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 110 mm dia equal or unequal complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) branch piece, single (single Y) 75mm dia type 'B' equal or unequal complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal type 'B' complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal type 'B' complete all as specified and as directed.

Supply and fix in repairs 110mm bore PVC (SWR) vent cowl type 'B' complete all as specified and as directed.

Supply and fix in repairs 75mm bore PVC (SWR) vent cowl type 'B' complete all as specified and as directed.

Supply and fix in repairs stainless steel fancy type curain rod 25 mm including SS brackets, decorative knobs,and including all necessary fittings such as rawl plug screws complete all as specified and as directed.

Material and labour rendering 10 mm thick on concrete surfaces in CM 1:6, finished even and smooth complete all as specified and as directed.

Supply and fix in repairs looking mirror of size 700 x 500 x 5 mm thick glass mirror with double coat for protection and longevity grounded edges for safety and silver plating on the back for better reflection all as per Cera Cat No: B3510112 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as per Prayag Cat No. BA-45 or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs flow censor urinal all as per Hindware Catalogue ID : 60021 or techno commercially equivalent makes specified in PS (white), of Size : 29.5 × 32.5 × 57.5 cm, inbuilt sensor for touch free flushing complete all as specified and as directed.

Supply and fix in repairs health faucet as per Cera Model-F 8030105AB (ABS) or techno commercially equivalent makes specified in PS, with 1 meter SS braided connection pipe complete all as specified and as directed.

Supply and fix pluto wall-mounted hand dryer automatic Cat No.(PHD 205) by Euronics or techno commercially equivalent makes specified in PS complete all as specified and as directed.

Supply and fix in repairs table top wash basin-corus snow white, all as per Cera Cat No. S2020161, or techno commercially equivalent makes specified in PS size-550 x 450 x 110 mm including pillar tap, brackets all necessary fittings complete all as specified and as directed by Engr-in-Charge.

Material and labour 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like over 15mm thick cement Screed base in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Material and labour for sunken flooring as per following details complete all as specified and directed (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance of 5KM to 7.5KM .(b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc.(c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or equivalent as given in Appx 'C'.) (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush complete all as specified and directed.

Supply and fix UPVC 40 mm dia for spout pipe in sunken floor complete all as specified and as directed.

Supply and fix rotational moulded LLDPE water storage tanks 500 ltrs capacity (as per IS:12701), tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking down existing unserviceable overhead tank of any capacity complete all as specified and directed.

Taking down carefully existing unserviceable aluminum / copper point wiring of any description and in any position with and including existing steel conduit / PVC Conduit / casing caping fixed on surface / wall / angle / girder and including all fittings, accessories,fixtures such as switches, ceiling roses, pendants, regulators, sockets, etc including sunken boxes/junction boxes and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed.

Material and labour point wiring in PVC casing & caping of suitable size but not less than 20mm size including all fittings such as elbow, bends, junction boxes, saddles, etc. on surface with and including ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRLSH) 1.5 sq.mm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sq.mm (green colour) ISI marked PVC insulated unsheathed multistranded (FRLSH) copper conductor cable as earth wire to be terminated in and including PVC rectangular block of suitable size for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover for one light point or one fan point controlled by one switch including making good the disturbed wall and painting the same to matchwith the existing wall all as specified and as directed by Engineer in charge.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one light point or one fan point or one call bell point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium plated screws & cup washer on existing MS concealed box for mounting of switch, regulators or bell push and casing caping terminal box for mounting ceiling rose/ holders etc including dismantling / taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and as directed.

Material and labour surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories alongwith one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one 5 Amps socket point on independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket including dismantling / taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and as directed.

Material and labour for surface point wiring with two single core PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one 5 amps socket point on same board with other switches including dismantling / taking down old unserviceable point wiring and making good to disturbed surfaces all as specified and directed.

Material and labour surface point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH copper conductor cable of size 2.5 sq.mm (nominal area) drawn in and including PVC casing caping of required size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volts grade multi stranded FRLSH copper conductor cable of size 1.5 sq.mm as earth lead and connected to earth dolly for one 16 Amps and 5 Amp socket (power) point on independent board including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, socket all as specified and as directed.

Material and labour surface submain wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sq.mm (nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: - Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Material and labour surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sq.mm (nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sq.mm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: -Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Supply and fix switch 6 Amps flush type one way single pole including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix bell push piano type one way 240 volts including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix switch flush type, 5 Amps, 230 volts AC circuit complete all as specified & directed

Supply and fix socket outlet 2 in 1, 3 pin, 6 Amps, 230v including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix socket outlet 2 in 1 3 pin, 6 Amps and 16 Amps , flush type, multipurpose, 230 volts AC circuit complete all as specified & directed.

Supply and fix switch flush type, 15 Amps, single pole, one way, 230 volts AC circuit complete all as specified and as directed.

Supply and fix switch socket combination multipurpose 2-in-1 flush type 3 pin 16 Amps and 3 pin 6 Amps, 230 volts including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type , flush type, 230 volts AC circuit complete all as specified & directed

Supply and fix lamp holder insulated body with back plate for batten fitting including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix ceiling rose surface bakelite three terminal including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix LED lamp 12 watt, CDL, B-22 cap, pin type, 230 Volts, PF-0.95 (min) including dismantling / taking down un serviceable one all as specified and as directed. MAKE:- CG cat Part No LED12WDFWB or techno commercially equivalent in Bajaj/ Philips.

Supply and fix call bell electric, ding dong, AC 240 volt, 50 HZ. including taking down unsv one all as specified and as directed.

Supply and fix flush type electronic fan regulator with 5 step type,120 W, AC 240 Volts, 50 Hz including dismantling / taking down un serviceable one all as specified and as directed.

Supply and fix MCB, Single Pole, 6 to 32 Amps, 240 volts, 10 KA breaking capacity, "C" curveincluding dismantling / taking down un serviceable one all as specified and as directed. MAKE :- Cat Part No 4085-87 to 4085-95 of Legrand or techno commercially equivalent of Schinder/ABB

Supply and fix MCB, Double Pole, 6 to 32 amps, 415 volts, 10 kA breaking capacity, "C" curve incl dismantling taking down unsv one all as specified and as directed. MAKE :- Cat Part No 4086-28 to 4086-36 of Legrand or techno commercially equivalent of Schinder/ABB

Supply and fix MCB 240 volts conforming to IS of rating 6 to 32 Amps, SP 10 KA breaking capacity complete all as directed by Engr-in-Charge.

Material and labour including fixing MCB, four pole, 40 to 63 Amps, 415 Volts including dismantling / taking down un serviceable one all as specified and as directed. MAKE- Cat Part No- 4087-00 to 4087-02 of Legrand or techno commercially equivalent of Schneider/ABB

Supply and fix MCB distribution board, double door, metal enclosure , SPN, 230 Volts, 8 way including dismantling / taking down un serviceable one all as specified and as directed. MAKE:- Cat part No 5076 10 of Legrand or techno commercially equivalent of Schinder/ABB

Material and labour including fixing MCB distribution board, double door, metal enclosure, TPN, 415 Volts, 4 way including dismantling / taking down un serviceable one all as specified and directed. MAKE:- Cat Part No- 5076-70 of Legrand or techno commercially equivalent of Schneider/ABB.

Supply and fix LED building security light 25 watt, 230V with lens and toughen glass top complete PF > 0.95 with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 20/25 mm dia bracket of total length 50 cm and fixed to wall with 2 Nos MS clamp and fastener including dismantling / taking down un serviceable one of any type all as specified and directed. MAKE:- Bajaj Cat Part No ENXTP 25L WH PO PC SD or techno commercially equivalent in CG/Wipro/Havells.)

Supply and fix LED fitting, 20 watt, CDL, 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp and mounting casing box 2 nos including dismantling / taking down un serviceable one of any type all as specified and directed. MAKE :- CG, Cat Part No CCS-100-20-65-HL2-DP-NWH or or techno commercially equivalent in Bajaj / Havells / Philips.

Supply, fixing, connecting up to existing/new ceiling rose and testing industrial box type batten with precoated CRCA body. LED tube light fitting suitable for and including 1x20 W 4 feet long tube with polycarbonate diffuser ,LED lamp efficay -110 Lum/W ,THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV , power factor ≥0.9 including all accessories including dismantling of old fittings. MAKE:- Crompton Cat no-IGP161LT8-16 & LT8-20-865 or techno commercially equivalent in Bajaj/Philips.

Supply, fixing and connecting in at any height up to existing / new ceiling rose and testing LED batten with 10 Watt LED light source in integral module with polycarbonate / acrylic diffuser more than 85%efficiency of light with LED lamp efficay as 100 Lum/W THD ≤15% with operating voltage range 100-300V, driver efficency >85%, surge voltage withstand 2.5 KV, power factor ≥0.9, fittings conection complete all as specified and as directed.

Material and labour exhasut fan 300mm sweep including dismantling / taking down un serviceable one all as specified and as directed. Make-Bajaj Cat Part No 70003 or techno commercially equivalent in /Havells/Crompton. NOTE :- U/S exhaust fan to be deposited to E&M Store Yard .

Supply and fix Metal plug and socket board with MCB SP 20 AmpS, 16 KA including dismantling / taking down un serviceable one all as specified and directed. MAKE:- Cat Part No- 5078 11 of Legrand or techno commercially equivalent of Schneider/ABB.

Supply and fix in repairs geyser for hot water single phase AC 240 Volts, 50 Hz, 25 Litre capacity including connecting cable with plug top all as specified and as directed. MAKE:- Bajaj Cat Part No 150742 New shakti or techno commercially equivalent in Venus/Crompton

Supply and fix in repairs energy saving ceiling fans, 230 Volts, of any wattage, single pole, 1200 mm sweep, high speed of approved colour with remote control and two years warranty certificate from the manufacturers, with latest BEE five star rating and BLDC technology all as per Havells Model No :- Efficiencia Neo (BLDC 26W) / Bajaj Model No. Excell star :- 251084 or techno commercially equivalent models specified in PS complete with down rod and GI hook with welding work, wire connections from ceiling rose to ceiling fans, with complete accessories including writing of MES No with unit name on ceiling fans using approved stencil with synthetic enamal paint complete all as specified and as directed.

Dismantling and taking out old unserviceable copper/aluminium sub main wiring/ unarmoured cable (used as sub main wiring) from any height of any size and core with all connecting accessories including conduit or casing caping and incld. making good to the disturbed wall and painting the same with matching paint as of existing wall including material all as specified and directed by Engineer in charge.

Material and labour for Sub main wiring at any height and surface with and including two single core PVC insulated multi stranded copper conductor cable, conforming to IS, FRLSH type, 4.0 sq.mm, 1100 volts grade, drawn through new casing caping including connected accessories and one single core PVC insulated multi stranded unsheathed copper conductor cable, FRLSH type, 4.0 sq.mm, 1100 Volts grade, green in colour as earth contuinity wire all as specified and directed by Engineer in charge.

Vastushilpa Contrustion

SAMBHAJI D JARANDE