REPLACEMENT OF BER LIFTS AND CONNECTED ITEMS AT CH KOLKATA UNDER PARA 36 OF DWP 2020

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.(upto 4 storey)

All as per item No. 1 above but 5 storey to 8 storey

All as per item No. 1 above but 9 storey to 12 storey

M&L for coloured non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc. set and jointed in neat cement slurry over a bedding layer of scread bed 15 mm thick in CM 1:4 and pointed in white/colourc ement to match complete all as specified and directed (upto 4 storey)

All as per item No. 4 above but 5 storey to 8 storey

All as per item No. 4 above but 9 storey to 12 storey

M&L for Granite(of any type) tiles 20 mm thick for slab machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone over 10 mm thick Plaster in cement mortar 1:4 including grinding & polishing fixed in steps,jambs,skirting,pillars,cooking plateforms ,window cills complete all as specified and directed by Engineer-in-Charge (upto 4 storey)

All as per item No. 7 above but 5 storey to 8 storey

All as per item No. 7 above but 9 storey to 12 storey

Material and labour for 18-20 mm thck machine cut Kota Stone slab flooring set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and as directed(upto 4 storey)

All as per item No. 10 above but 5 storey to 8 storey

All as per item No. 10 above but 9 storey to 12 storey

M&L for Granite (of any type) tiles 10-12 mm thick machine cut, bedded and joint with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polished in wall, jamps, pillars etc compelte with 10mm screed bed all as specified and directed Eingr-in-Charge (upto 4 storey)

All as per item No 13 but 5 storey to s storey

All as per item No 9 but 12 storey to s storey

Chipping of unsound/weak concrete materials from slabs, beams, columns, lintel, chajja, fin , facia etc. by any means as directed by Engr-in-Charge including tapering all edges, making square shoulders of cavities air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting incl foreign matrials, loose concrete/aggregate etc. and disposal of all debris out of MOD land for 25mm average thickness for slabs/Chajja upto 4 storey complete all as specified and directed.

All as per item No 16.00 above but 5 storey to 8 storey.

All as per item No 16.00 above but 9 storey to 12 storey.

All as per Item No 16.00 above but 50mm average thickness for "beams/linters upto 4 stroey complete all as specfified and directed

All as per item No 19.00 but 5 storey to 8 storey.

All as per item No 19.00 but 9 storey to 12 storey.

All as per Item No 16.00 above but 60mm average thickness for columns upto 4 stroey complete all as specfified and directed

All as per item No 20.00 above but 5 storey to 8 storey.

All as per item No 20.00 above but 9 storey to 12 storey.

Add or deduct for every 10 mm thickness extra of Sch 'A' item No 19 above upto 4 storey complete all as specified and directed.

All as per item No 25.00 above but 5 storey to 8 storey

All as per item No 25.00 above but 9 storey to 12 storey

Removing of concrete all around reinforcement including from behind the reinforcing bars to give an average 25mm (but not less than 15mm clear air gap) by manual methods (using wire brushing, chiselling etc) and applying alkaline rust removing chemical followed by removing rust including from behind the reinforcement bars by emery paper and cleaning the area throughly by water and allow it to dry all as per manufacturer,s instruction to give it a totally rust free finished steel surface of any dia of bar upto 4 storey complete all as specified and directed.

All as per item No 28.00 above but 5 storey to 8 storey

All as per item No 28.00 above but 9 storey to 12 storey

M&L for providing single coat of epoxy bond adhesive of prepared non metallic surface (existing surface) and applying by brush all as per manufactures instruction/specification. The bonding agent shall have minimum compressive strength of 40 N/Sqmm upto 4 storey complete all as specified and directed.

All as per item No 31.00 above but 5 storey to 8 storey

All as per item No 31.00 above but 9 storey to 12 storey

Supply and application of Epoxy Zinc rich primer on the prepared steel surface by brush the primer shall have a minimium specific gravity 1.75 minimum weight film thickness/coat 40 microns and minimum adhesive bond strength with steel is 1.5N/mm2 upto 4 storey High bar size needs to be mentioned

All as per item No 34.00 above but 5 storey to 8 storey

All as per item No 34.00 above but 9 storey to 12 storey

M&L for introducing new reinforcement bars for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling, fixing any dia of reinforecement in position as directed using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed by Engr-in-charge. upto 12 mm dia bar upto 4 storey High.

All as per item No 37.00 above but 5 storey to 8 storey

All as per item No 37.00 above but 9 storey to 12 storey

M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed by Engr-in-Charge for 60 mm average thickness of Column, upto 4 storey High.

All as per item No 40.00 above but 5 storey to 8 storey

All as per item No 40.00 above but 9 storey to 12 storey

M&L for providing and placing in position free flow non shrink cementitious micro concrete of Grade of M-50 to the effected beam, column etc. The micro concrete shall have a minimium 1 day compressive strength of 10 Mpa and 28 days strength of 50 Mpa, minium tensile strength 5N/mm2 @ 28 days, minimium flextural strength 5N/mm2 @ 28days and complete all as specified and directed by Engr-in-Charge for Add or deduct for every 10 mm thickness extra, upto 4 storey High.

All as per item No 43.00 above but 5 storey to 8 storey

All as per item No 43.00 above but 9 storey to 12 storey

Supply, mixing and application two component structural grade polymer modified reinstatement mortar, where local spalling has taken place or shuttering is not possible. The morter can be applying in layers not exceeding 6mm thick in each layer in and upto any thickness in smaller vertical pockets and upto any thickness in horizontal applications. The mortar should have a minimium compressive strength 12N/mm2 in 1 day and 45N/mm2 in 28 days. Minimum flexural strength should be 8N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementious system to be mixed with cement slurry before the application of modified polymer mortar to be used @ 6 ltr/bag of cement. The bonding agent should have minimium compressive strength 24N/mm2. Minimum tensile strength 3.5N/mm2, minimium flexural strength 6.5N/mm2 complete all as specified and directed by the Engr-in-charge upto 25 mm average thickness and upto 4 storey High. Make :- Sika/Fosroc NOTE :- Cement and sand morter in proportion of 1:2 graded coarse sand with polymer admires shall be mised shall be mixed in proportions approved by Engr-in-charge.

All as per item No 46.00 above but 5 storey to 8 storey

All as per item No 46.00 above but 9 storey to 12 storey

M&L for applying curing compound over concrete surfaces as per manufactures instruction complete all as specified and directed by Engr-in-charge upto 4 storey High.

All as per item No 49.00 above but 5 storey to 8 storey

All as per item No 49.00 above but 9 storey to 12 storey

M&L for hoisting, assembly and fixing of double layer steel scaffolding to external perimeter of building duly cross braced and properly aligned for the functional aspect and safety of the building including dismantling, shifting & removal from site upto 4 storey High complete all as specified and as directed by the Engineer-in-Charge. Note: (i) Elevational area of the scaffolding facing the building shall be measured for payment. (ii) Steel scaffalding is considered for structural repair work inside lift well, which is inescapable.

All as per item No 52.00 above but 5 storey to 8 storey

All as per item No 52.00 above but 9 storey to 12 storey

Supply and Application Cementitious Grouting Admixture with the Cement slurry at a dosage 225 ml per bag of cement and injecting with high pressure by a Pressure grouting Pump through non return PVC nozzles Prefix with rapid setting cementitious Plugging Mortar to fill all possible pores and gaps left within the old concrete mass. When the flow of grout stops or shows refusal or grout flows out from the adjacent nozzle, pumping to be stopped and the nozzle to be tied up and allowed to set for 24 hours. The PVC nozzles to be sealed off with quick-setting cementitious plugging mortar. Grouting operation to be carried out through next nozzle till the entire area is covered. The grouting holes to be finished by removing the protruded portion of nozzles and finishing flush with the surface complete all as specified and as directed by the Engr-in-Charge(upto 04 storey) ( Make :- Fosroc/Elantas beck/Kunal conchem). The approximate dia nof hole/ void is exceeding 25 Sqmm but not exceeding 50 Sqmm.

All as per item No. 55.00 above but 5 storey to 8 storey

All as per item No. 55.00 above but 9 storey to 12 storey

Supply only Integral Liquid water proofing compound (ISI Mark).( in any storey)

M&L for two coats of synthetic enamel paint over a coat of pink primer area exc.10cm width or girth over new wooden surfaces including preparation of surface complete all as specified and directed upto 12 storey High of building

M&L for one coat of synthetic enamel paint on old wooden surfaces are exceeding 10 cm width or girth including preparation of surface complete complete in all respect as specified (upto 12 storey High of building)

Demolition of RCC of any description and in any position not otherwise specifically provided for (upto 4 storey)

All as per item No. 61.00 above but 5 storey to 8 storey

All as per item No. 61.00 above but 9 storey to 12 storey

M&L for providing PCC (1:3:6) type C2, using 40mm graded stone aggrgate as in mass concrete completed all as spcified and directed. (upto 4 storey)

M&L for RCC M-25 (Design mix) as in Walls, retaining walls,basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified. (upto 04 storey)

All as per item No. 62 above but 5 storey to 8 storey void

All as per item No. 62 above but 9 storey to 12 storey void

M&L for RCC M-25 (Design mix) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

M&L for RCC M-25 (Design mix) as in repair of Columns, pillars, piers, posts and struts complete all as specified. (upto 04 storey) Note : Demolition considered under item No 58.

All as per item No. 69.00 above but 5 storey to 8 storey Note : Demolition considered under item No 59.

All as per item No. 69.00 above but 9 storey to 12 storey Note : Demolition considered under item No 60.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.(upto 04 storey)

All as per item No. 72.00 above but 5 storey to 8 storey

All as per item No. 72.00 above but 9 storey to 12 storey

All as per item No. 72.00 above but 6 to 8 mm dia as in stirrups/ spares and binders complete all as specified and as directed. (upto 04 storey)

All as per item No. 75.00 above but 5 storey to 8 storey

All as per item No. 75.00 above but 9 storey to 12 storey

M&L Formwork square, rectangular or plougonal fair finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified.(upto 04 storey)

All as per item No. 78.00 above but 5 storey to 8 storey

All as per item No. 78.00 above but 9 storey to 12 storey

S & F for mild steel work conforming to Fe 410-W(Gde E-250) quality Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc complete all as specified and directed(upto 4 storey)

All as per item No. 81.00 above but 5 storey to 8 storey

All as per item No. 81.00 above but 9 storey to 12 storey

Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed (upto 04 storey)

All as per item No. 82.00 above but 5 storey to 8 storey

All as per item No. 82.00 above but 9 storey to 12 storey

Cutting opening in cement concrete walls (any description)With or without reinforcement for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed (upto 4 storey)

All as per item No. 87.00 above but 5 storey to 8 storey

All as per item No. 87.00 above but 9 storey to 12 storey

Cutting opening in cement concrete walls (any description) With cut of reinforcement for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc complete all as specified and directed (upto 04 storey)

All as per item No. 90.00 above but 5 storey to 8 storey

All as per item No. 90.00 above but 9 storey to 12 storey

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

All as per item No. 93.00 above but 5 storey to 8 storey

All as per item No. 93.00 above but 9 storey to 12 storey

Material and labour brick work with fly ash brick straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

All as per item No. 96.00 above but 5 storey to 8 storey

All as per item No. 96.00 above but 9 storey to 12 storey

M & L for brick work with fly ash bricks old size, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

All as per item No. 99.00 above but 5 storey to 8 storey

All as per item No. 99.00 above but 9 storey to 12 storey

Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.

M&L for 100 mm thick PCC (1:3:6) type C2 (20 mm graded stone agg) as in flooring, finished even and smooth with using extra cement complete all as specified and directed.

Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.( upto 4 storey)

All as per item No. 104.00 above but 5 storey to 8 storey

All as per item No. 104.00 above but 9 storey to 12 storey

M&L for Rendering on ceiling 5 mm thick in cement mortar (1:3) on of concrete surface finished even and smooth with out using extra cement complete all as specified and directed.

All as per item No. 107.00 above but 5 storey to 8 storey

All as per item No. 107.00 above but 9 storey to 12 storey

M&L for 15mm thick plastering on fair faces of brick wall and concrete surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.

All as per item No. 110.00 above but 5 storey to 8 storey

All as per item No. 110.00 above but 9 storey to 12 storey

M&L for one coat of white wash on old decorated surface of internal walls incl preparation complete all as specified and directed by Engr-in-Charge upto 4 storey bldg.

All as per item No. 113.00 above but 5 storey to 8 storey

All as per item No. 113.00 above but 9 storey to 12 storey

M&L for one coat of white wash on old decorated surface of ceiling incl preparation complete all as specified and directed by Engr-in-Charge upto 4 storey bldg.

All as per item No. 116.00 above but 5 storey to 8 storey

All as per item No. 116.00 above but 9 storey to 12 storey

M&L for three coat of white wash on new decorated surface of internal walls incl preparation complete all as specified and directed by Engr-in-Charge upto 4 storey bldg.

All as per item No. 119.00 above but 5 storey to 8 storey

All as per item No. 119.00 above but 9 storey to 12 storey

M&L for three coat of white wash on new decorated surface of ceiling incl preparation complete all as specified and directed by Engr-in-Charge upto 12 storey bldg.

All as per item No. 122.00 above but 5 storey to 8 storey

All as per item No. 122.00 above but 9 storey to 12 storey

Taking out/Stripping of old Roof treatment membranes/Tar felt incl layer of cement mortar of any type carefully from roof surfaces (without damaging roof ) and incl preparation of old roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust & receive new treatment complete all as specified and directed (upto 04 storey).

All as per item No 125.00 above but 5 storey to 8 storey.

All as per item No 125.00 above but 9 storey to 12 storey.

M&L for 25mm thick PCC 1:2:4 type 'B-0' using 12.5 mm graded crushed stone aggregate for padding concrete with minimum thickness of 25 mm with a slope of 1:40 complete all as specified and as directed (Up to 4 storey high bldg.)

All as per item No 128.00 above but 5 storey to 8 storey.

All as per item No 128.00 above but 9 storey to 12 storey.

M&L for 10 mm thick screed bed in cement mortar 1:4 mixed with Water Proofing Compound as per manufacture's instructions and top surface finished even and smooth to recieve water proofing treatment complete all as specified and as directed (upto 4 storey high bldg). Note : Water Proofing Compound shall be measured and paid separately.

All as per item No 131.00 above but 5 storey to 8 storey.

All as per item No 131.00 above but 9 storey to 12 storey.

Supply only Integral water proofing compound complete in all respect as specified and directed.

M&L cutting out cracks to "V" section in existing roofs of terracing cleaning out, wetting, grouting, with cement sand slurry 1:3 complete all as specified and as directed (up to 4 storey high bldg)

All as per item No 135.00 above but 5 storey to 8 storey.

All as per item No 135.00 above but 9 storey to 12 storey.

M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over and including primed surface by forced application complete all as specified and directed upto 4 storey high of bldg.

All as per item No 138.00 above but 5 storey to 8 storey.

All as per item No 138.00 above but 9 storey to 12 storey.

Taking down chowkhats or frames with shutters ( without taking off shutters from the frames) area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed (up to 4 storey high building).

All as per item No. 141.00 above but 5 storey to 8 storey

All as per item No. 141.00 above but 9 storey to 12 storey

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type complete all as spd and directed. (Upto 4 storey bldg)

All as per item No. 145.00 above but 5 storey to 8 storey

All as per item No. 145.00 above but 9 storey to 12 storey

S&F in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete Gauzed with glazing bars, dovetailed or welded complete including taking down old steel window all as specified and as directed by Engineer-in-charge. (Upto 4 storey bldg)

All as per item No. 147.00 above but 5 storey to 8 storey

All as per item No. 147.00 above but 9 storey to 12 storey

S&F in repairs Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete Gauzed without glazing bars, dovetailed or welded complete including taking down old steel window all as specified and as directed by Engineer-in-charge. (Upto 4 storey bldg)

All as per item No. 150.00 above but 5 storey to 8 storey

All as per item No. 150.00 above but 9 storey to 12 storey

S & F in repair framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars barred iron doors; ladders framed alusters; wald ways; railings; framework of water tanks and similar work confrming to Fe-290 Gde -E 165 complete all as specified and directed (up to 04 storey).

All as per item No. 153.00 above but 5 storey to 8 storey

All as per item No. 153.00 above but 9 storey to 12 storey

S&F 100 mm long butt hinges medium weight, cold rolled mild steel and fixed complete complete all as spd and directed.(Upto 4 storey bldg)

All as per item No. 156.00 above but 5 storey to 8 storey

All as per item No. 156.00 above but 9 storey to 12 storey

S&F aluminium anodised handles cast type, anodised 150mm long complete all as spd and directed.(Upto 4 storey bldg)

All as per item No. 159.00 above but 5 storey to 8 storey

All as per item No. 159.00 above but 9 storey to 12 storey

S&F aluminium anodised tower bolt cast type, anodised 200 mm long complete all as spd and directed.(Upto 4 storey bldg)

All as per item No. 162.00 above but 5 storey to 8 storey

All as per item No. 162.00 above but 9 storey to 12 storey

S&F 300mm long sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bots and sliding bolts of extruded or cast aluminium alloy complete all as specified and directed (Upto 4 storey bldg)

All as per item No. 162 above but 5 storey to 8 storey

All as per item No. 162 above but 9 storey to 12 storey

S&F second class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed (up to 04 storey).

All as per item No. 168.00 above but 5 storey to 8 storey

All as per item No. 168.00 above but 5 storey to 8 storey

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel/aluminium frames glazed with putty or fixed with beads complete all as specified and directed. (Upto 4 storey bldg)

All as per item No. 171.00 above but 5 storey to 8 storey

All as per item No. 171.00 above but 9 storey to 12 storey

S&F 4mm plain sheet glass ordinary quality and glazed with oil putty or fixed with fillets 2nd class hard wood of sectional area of glass not exc 0.5 sqm each pane complete all as specified & directed. (Upto 4 storey bldg)

All as per item No. 174.00 above but 5 storey to 8 storey

All as per item No. 174.00 above but 9 storey to 12 storey

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanized wire staples incl of dismentling all as directed by Engr in charge.(Upto 4 storey bldg)

All as per item No. 177.00 above but 5 storey to 8 storey

All as per item No. 177.00 above but 9 storey to 12 storey

Demolition of cement concrete (reinforcement as in roof floors (other than ground floors) beams, staricase landing, chajjas and similar suspended work all as specified and directed

M&L for RCC(Nominal Mix) in type-B1 1:2:4 (20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specfified and directed.

S& F hard drawn steel wire fabric weight exceeding 4.0 Kg/Sqm cut to lengths, bent to shape required and welded to angle /channel complete all as specified and directed by Engineer-in-Charge (up to 12 storey).

Material & labour preparation of new steel and iron surfaces of any description area exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide and zinc chrome primer, complete in all respect as specified.. (upto 12 storey High of building)

Material & labour preparation of old steel and iron surfaces of any description area exc 10 cm width or girth and applying one coat of synthetic enamel paint complete in all respect as specified.. (upto 12 storey High of building)

Dismanteling and taking down carefully all electrical and mechanical components, assemblies, sub-systems such as drives, machine, controls panels, lift car, ropes, ARD guides, counterweights, rails, beams and doors, electrical wirings, control wirings etc complete of exising unserviceable lifts including taking down all steel work and components from machine room, lift shaft , lift pit and stacking neatly all retrieved components for perusal of BOO and making good the disturebed surface in Machine room at all landing and in lift door facias, to match with the existing surfaces, all as directed at site by Engineer-in Charge for following lifts :- (Making good to disturbed surfaces will be paid under relevent items listed in schedule of B/R works mentioned here-in-before )

Dismantling of the old 08 passengers lift machine (G + 6) and all connected accessories all as specified and directed. (Location of lift : Nursing offr Mess (CH))

Dismantling of the old 6 passengers lift machine (G + 6) and all connected accessories all as specified and directed. (Location of lift : P-120)

Dismantling of the old 08 passengers lift machine (G + 7) and all connected accessories all as specified and directed. (Location of lift : P-119)

Dismantling of the old 08 passengers lift machine (G + 8) and all connected accessories all as specified and directed.(Location of lift : Park View-02 Nos)

Dismantling of the old 8 passengers lift machine (G + 10) and all connected accessories all as specified and directed.(Location of lift : P-178 (A Block) -02 Nos)

Dismantling of the old 13 passengers lift machine (G + 10) and all connected accessories all as specified and directed. (Location of Lift : P-178 (A Block)

Dismantling of the old 8 passengers lift machine (G +11) and all connected accessories all as specified and directed. (Location of Lift : B-179 (B Block)-02 Nos, P-127, P-128, P-129)

Dismantling of the old 10 passengers lift machine (G +11) and all connected accessories all as specified and directed. (Location of Lift : P-130 (b), P-130))

Dismantling of the old 13 passengers lift machine (G + 11) and all connected accessories all as specified and directed.(Location of Lift : P-179 (B Block)

Dismantling of the old 13 passengers lift machine (G + 3) and all connected accessories all as specified and directed. (Location of Lift : Gol Bldg

Dismantling of the old 13 passengers lift machine (G + 4) and all connected accessories all as specified and directed. (Location of Lift : CH(EC) Lift No 2)

Dismantling of the old 15 passengers lift machine (G +5) and all connected accessories all as specified and directed.(Location of Lift : 100 Beds CH)

Dismantling of the old 26 passengers lift machine (G +5) and all connected accessories all as specified and directed. (Location of Lift : 100 Beds CH-02)

Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+6 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative (Cosed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator, announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given below complete all as specified and directed:- (Location of lift : NO Mess (CHEC))

(a) Type & capacity : 8 Passenger, 544 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (As existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+6 floor (h) Serving : G+ 6 upper floors- (7 Stops, 7 landings, 7 openings) (j) Existing Well size : As existing at site (as per Appx `A' attached)

(k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20mm thick granite flooring. (s) No of Entrance : One location - Front.

(t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button.

(ar) Hall fixtures face plate : Stainless steel (Hairline). (as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor (av) Ventilation : High powered axial flow fan with suitable air throw of 600 CFM through a duct all around the car so that uniform air flow shall be available at all side of the car.

Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+6 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative (Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 04 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 6 passenger as per the details given below complete all as specified and directed :- (Location of lift : P-120 )

(a) Type & capacity : 6 Passenger, 408 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (As existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+6 floor (h) Serving : G+ 6 upper floors- (7 Stops, 7 landings, 7 openings) (j) Existing Well size : As existing at site (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front.

(t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided.

(aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure. (ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline).

(ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline). (as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+7 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative (Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 04 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given below, complete all as specified and directed :- (Location of lift : P-119)

(a) Type & capacity : 8 Passenger, 544 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+7 floor (h) Serving : G+ 7 upper floors- (8 Stops, 8 landings, 8 openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front.

(t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. ((ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button.

(ar) Hall fixtures face plate : Stainless steel (Hairline). (as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+8 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative (Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 04 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given below complete all as specified and directed :- (Location of lift : Park View-02 Nos)

(a) Type & capacity : 8 Passenger, 544 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+8 floor (h) Serving : G+ 8 upper floors- (9 Stops, 9 landings, 9 openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. ((ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button.

(ar) Hall fixtures face plate : Stainless steel (Hairline). (as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install, testing & commissioning of Passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+10 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative (Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3D infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 04 Nos, one each in car, Machine room & near ground floor landing door),Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given below complete all as specified and directed :- (Location of lift : P-178 (A Block) -02 Nos)

(a) Type & capacity : 8 Passenger, 544 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+10 floor (h) Serving : G+ 10 upper floors- (11 Stops, 11 landings, 11 openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6

(z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button.

(ar) Hall fixtures face plate : Stainless steel (Hairline). (as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+10 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given below., complete all as specified and directed (Location of Lift : P-178 (A Block)

(a) Type & capacity : 13 Passenger, 844 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+10 floor (h) Serving : G+ 10 upper floors- (11 Stops, 11landings, 11Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. ((at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+11 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 8 passenger as per the details given below., complete all as specified and directed (Location of Lift : B-179 (B Block)-02 Nos, P-127, P-128, P-129)

(a) Type & capacity : 8 Passenger, 544 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+11 floor (h) Serving : G+ 11 upper floors- (12 Stops, 12 landings, 12 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5 mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10,11 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+11 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 10 passenger as per the details given below., complete all as specified and directed (Location of Lift : P-130 (b), P-130)

(a) Type & capacity : 10 Passenger, 680 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+11 floor (h) Serving : G+ 11 upper floors- (12 Stops, 12 landings, 12 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing.The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10,11 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+11 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given below., complete all as specified and directed (Location of Lift : P-179 (B Block)

(a) Type & capacity : 13 Passenger, 844 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+11 floor (h) Serving : G+ 11 upper floors- (12 Stops, 12 landings, 12 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5,6,7,8,9,10,11 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+3 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given below., complete all as specified and directed. (Location of Lift : Gol Bldg

(a) Type & capacity : 13 Passenger, 844 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+3 floor (h) Serving : G+ 3 upper floors- (4 Stops, 4 landings, 4 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder, where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+4 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 13 passenger as per the details given below., complete all as specified and directed (Location of Lift : CH(EC) Lift No 2

(a) Type & capacity : 13 Passenger, 844 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+4floor (h) Serving : G+ 4 upper floors- (5 Stops, 5 landings, 5 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+5 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 15 passenger as per the details given below., complete all as specified and directed (Location of Lift : 100 Beds CH)

(a) Type & capacity : 15 Passenger, 1020 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+5 floor (h) Serving : G+ 5 upper floors- (6 Stops, 6 landings, 6 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Design supply , install testing & commissioning of passengers lift electrically operated, microprocessor controlled, speed 1.5 meter/sec, lift with single speed motor 415 volts, 3 phase, AC 50Hz supply conforming to IS-14665, suitable to serve G+5 upper floors with AC Variable Voltage Variable Frequency (VVVF) Regenerative(Closed loop) drive ( ACD3-MR drive) complete with all standard accessories, simplex automatic & manual dual controlled operation with/without attendent, centre opening doors with door drive (electric motor driven mechanism), sliding stainless steel doors, emergency automatic rescue device (ARD) system with standby power supply by using suitable capacity maintenance free battery, 3d infra red sensor in full height of door & built in voice announcement system in the car to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator,announcing system without hand set ( 03 Nos, one each in car, Machine room & near ground floor landing door), Battery operated emergency light & alarm complete all as specified for 26 passenger as per the details given below., complete all as specified and directed (Location of Lift : 100 Beds CH-02)

(a) Type & capacity : 26 Passenger, 1768 Kgs - Gearless (b) Speed : 1.5 M/Sec (c) Type of Drive : VVVF Regenerative (Closed Loop) (d) Type of control : Microprocessor based Simplex full Collective control (e) Location of Machine Room : Top of Building (as existing) (f) Machine : Gearless Machine (g) Travel : As per existing site to serve G+5 floor (h) Serving : G+ 5 upper floors- (6 Stops, 6 landings, 6 Openings) (j) Existing Well size : As existing at site (as per Appx À'attached) (k) Existing Pit depth : 1600 mm . (Existing Pit Depth is meeting the requirements of NBC , IS Codes and West Bengal Lift Rules. However if any modification is still required as per manufacturers recommendation the same shall be carriried out by Contractor without any extra cost to the Department) . Pit depth and overhead shall be such as to conform to the requirements of bottom clearance and top clearance as specified in IS: 14665.

(l) Head Room : As per existing site. (m) Power supply : 415 volts Three-Phase, 50 Cycles AC. The entire lift equipment shall be suitable for operation at +10% to - 20% of rated supply voltage. (n) Auxiliary supply : 220 volts Single-Phase, 50 Cycles AC. (o) Earth connection : All new Earthing Points and Earth Contunity strips, connections Conductors shall be provided as per NBC, National Electrical Code and Code of Practices for Earhing. The cost of earthing and connected items shall be paid separaty under respective item of work in schedule. (p) Car Enclosure : Stainless Steel (Hairline) mirror finish body of car having minimum thickness of SS Sheet as 1.5mm incl recessed LED light, false ceiling, as per NBC or other relevant BIS code. (q) Car Size : As per NBC 2016 or other relevant BIS code of latest edition.. (r) Flooring : 18-20 mm thick granite flooring. (s) No of Entrance : One location - Front. (t) Car Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door.

(u) Landing Entrance : Automatic power operated centre opening, Stainless Steel, mirror finish Door. (v) Clear opening for door : As per existing site. (w) Floor Designation : 0,1,2,3,4,5 (x) Indicators : Car & Landings : Direction & Position Indicator/ call registration LEDs (y) Roping : Lift rope shall be provided as per NBC-2016 and IS 14665 - 2001 (upto date) of tensile strength not less than 12.5 tonnes/cm square and factor of safety shall be 8.6 (z) Battery operated emergency Alarm & Light shall be provided. (aa) Full height Infra-red Light Curtain Door Safety shall be provided. (ab) Press & Speak Phone shall be provided for intercom system. (ac) Fireman switch shall be provided. (ad) Emergency Automatic Rescue Device (ARD) with suitable capacity maintenance free battery shall be provided for elevation of passengers trapped in lift car during power failure between floors .The ARD shall work for 3 phase and single phase failure.

(ae) Overload Protection Device, Load Weighing Device(LWD)/OSG (overspeed governors) Electronic switch shall be provided. (af) Voice announcement system in the car shall be provided to announce the position of the elevator in the hoistway as the car passes or, stops at a floor served by the elevator. (ag) Micro- Stroke illuminated push buttons shall be provided. (ah) All landing door shall be one hour fire rated. (aj) Car door lock shall be provided. (ak) Auto drive recall, Automatic Fan & light switching off arrangements shall be provided. (al) Hand Rails : Stainless steel mirror finish handrails on rear sides in car panels. Full height and full width mirror finished stainless steel (1.5mm) panel to be provided on all side above hand rails. (am) MS Pit Ladder shall be provided. (an) Door Operator : DC Door Operator (ao) Car operating panel : Square flush painted illuminated buttons in Stainless steel (Hairline). (ap) Car position indicator : Dot matrix (Red LED) scrolling display. (aq) Hall fixtures : 16 segment display hall button. (ar) Hall fixtures face plate : Stainless steel (Hairline).

(as) Hall button arrangement : Hall button with FPI. (at) Standard Features : Anti nuisance car cell protection, overload device, nudging, independent service belt inspection device. Emergency Fireman's service. Emergency car light unit, Infrared curtain protection, door time protection, emergency alarm button, extra door time of lobby and parking, door open/close button, manual rescue operation, belt inspection drive and auto fan cut off.ON/OFF system to be synchronised with car door opening/closing system. (au) Machine room ladder , where applicable should be provided by the contractor (av) Hoist way wiring, where required shall be provided by the contractor

Note for Item No 183.00 to 203.05 (i) The system (Lift) shall be guaranteed against maintenance and repair including spares for a period of one year from the certified date of completion of this contract and the cost of these shall be deemed to be included in the unit rates quoted against the lifts . The lump sum cost of above lift shall be deemed to include cost of comprehensive maintenance in defect liability period of all the lifts provided by the contractor under this contract for a period of one year from the certified date of completion of the work. For this a sum of Rs. 4,00,000.00 (Rupees Four Lakhs only) shall be retained from the final bill of this contract till satisfactory completion of said comprehensive maintenance period of lifts as certified by the GE. The amount so retained shall be released by the GE after expiry of satisfactory comprehensive maintenance in defect liability period.

(ii) The bidder/ tenderer is be advised to visit existing lifts, lifts well, machine room at site, before quoting his offer and nothing will be paid on this account. Irrespective of the fact if the Bidder has visited the site or not, it shall be assumed that he has visted the site and nothing extra shall be payable on account of any variation in site conditions than those specified in tender. (iii) The quoted rate shall deemed to include the cost of minor civil works, MS Beam, MS rail with fixing arrangement including making good to the disturbed surface to match with the existing. (iv) The lifts shall comprise of all latest fail safe measures as specified in relevant IS Codes (IS-14665 of 2015: Part-I, IS-14665 of 2009: Part -V, IS-4591 of 2012, IS-15785 of 2007) and National Building Code – 2016 Section-5 part-8 as revised from time to time. (v) The wiring of lift shall be with copper conductor, stranded, ISI marked of suitable size. The wiring in the lift well shall be in MS conduit, ISI marked medium grade of suitable size. Suitable sockets/lights shall be provided as directed in the lift shaft. (vi) If anything missed above but is technically required for efficient working of the lift is deemed to be included in the quoted rate. (vii) Instruction shall be provided by the manufacturer inside and outside the car. The instructions shall be written on a metallic sheet with embossed letters matching with car decor/outside decor all as directed. (viii) A board depicting manual rescue procedure to be provided at location as directed. (ix) The comprehensive maintenance of lift shall be executed through OEMs or their accredited/ authorized agencies.

(x) The contractor shall submit MOU with the OEMs or their accredited/ authorized agencies for comprehensive maintenance of defect liability period after one month of date of commencement. (xi) The quoted rate is deemed to include the above provisions as specified above. (xii) After errection of lift it must be tested from IEM in presence of vendor. (xiii) In case of any specific capacity of passenger are not manufactured by the any above OEM, the contractor shall provide nearby higher capacity of passenger by OEM without any extra cost to the department. (xiv) GA drawings shall be submitted by the contractor prior to execution of work for approval of GE (xv) In the above description, if any thing is left out but it is a mandatory requirement to comply relevant IS/NBC's directive or anything more provided by the OEM for better performance of the lift , which may be provided to be included in the cost for extra items shall deemed to be included in the unit cost quoted. No extra payment shall be allowed on this ground lateron.

Materials and labour for earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised strip of size 32x6mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed by the Engr-in-Charge.

Supply and fixing in repair for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6mm galvanised iron strip.and all as per directed.

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. Mm 4 Core complete all as specified and directed

Supply and lay XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. Mm 4 Core complete all as specified

MB Enterprises

NIRMAL SALES CORPORATION

DNS CONSTRUCTION COMPANY

M P KHAITAN

surendra infrastructure pvt ltd