Tender ID

Karnataka

Retender

Works

Buildings

Construction of Anganawadi Kendra-8 in Tadakod of Tadakod Gram Panchayat in Dharwad Taluk

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹10.1 LCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published28 Nov 2024
Closed6 Dec 2024
Retendered28 Nov 2024

Cancellation Details

Retendered

RetenderedRetenderedReason: Retendered

Published 28 Nov 2024

Tender Value

₹10.1 L

EMD Value

₹25,200

Closing Date

6 Dec 2024, 9:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Rural Development and Panchayat Raj Department

Contact Person

R M Soppimath

Office Number

Work Description

Construction of Anganawadi Kendra-8 in Tadakod of Tadakod Gram Panchayat in Dharwad Taluk

Tender Information

Tender ID

RDPR/2024-25/BD/WORK_INDENT10585

Reference Number

RDPR/2024-25/BD/WORK_INDENT10585

Tender Type

Open

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

RDPR Division Office Daharwad

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContractor should upload KPWD renewal registration copy.

RequiredTo qualify for award of this contract each tenderer in his name should have in the last five years period that is 2019-20 to 2023-24. Turnover Certificate with balance sheet obtained from Charted Accountant and achieved in at least two financial years Annual Financial Turnover in all classes of civil Engineering construction works only of Rs.10,06,363.84 usually not less than the estimated cost under this contract with UDIN.

RequiredIn last five years That is 2019-20 to 2023-24 Satisfactorily completed as A prime contractor for at least one similar nature of work done work 50 Percent of the cost of the work that is not less than the amount Rs 5.03 lakhs Certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

RequiredLiquid assets and /or availability of credit facilities of not less than Rs.3.01 lakhs. That is 30 Percent of amount put to tender. Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc. for particularly this work only. Unconditional

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years 1. RCC/PCC-14.632 Cum, 2.Steel-1510 Kg, 3.Plastering- 306.112 Sqm, 4.Flooring- 284.00 Sqm, 5.Painting- 306.00 Sqm

RequiredThe contractor should scan the GST Certificate.

RequiredThe contractor should scan the PAN card.

RequiredCalculation sheet of Bidder Capacity AxNX2.5-B

RequiredContractors Postal address and Mobile No

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Tender schedule will be issued against the e-Payment / NEFT / Credit Card / Debit Card / OTC.

Any damage during the progress of work, the damage cost should be beared by the contractor.

Any addition / Ommission / alteration will be reserved by the under signed

Tender processing fee will not be refundable or exchangeable in case of cancellation of tender

Contractor should made an agreement within 20 days of tender acceptance date and work should be carried out with in the 1 week time after agreement. If not tender will be cancelled at the contractors own risk and cost

Security deposit at the rate of 5% of tender cost should be made in favour of Executive Engineer in the form of DD / FDR / NSC (NSC should be fledge in the name of Executive Engineer)

Acceptence / Cancellation of the tenders are reserved by under signed without any reasons for the same

The work should be carried out in accordance with the standard specifications specified by the department. The defect liability period for all these works shall not be less than 1 year & the contrator shall have to give guarantee for 1 year maintanance.

The rates quoted by contractor shall include for structural design & drawing duly certified by the competent authority. The Tenderer whose tender is accepted shall furnish withing 15 days the structural design & drawings in 3 sets for scrutining to the competent authority. The contractor shall furnish 3 sets of design & drawings (approved) to the Engineer-in-charge and keep one set at site of work. The safe bearing capacity shall be got tested before submission of the drawings.

If the rates quoted by the Contractor is lesser than the amount put to tender, the difference cost should be paid by the contractor, through DD / FDR / NSC in the favour of Executive Engineer at the time of Agreement

The Contractor shall quote the rates without adding GST for either materials or works contract Service. GST payable by the Contractor under this works contract will be paid to the contractor seperately over the contractors bid amount as per Govt order No PWD 65 RDF 2017,dtd:11-10-2018

Contractor should obey with the above conditions in addition to the KW-1.

Liquid assets and /or availability of credit facilities of not less than Rs 3.01 lakhs (30% of amount put to tender) (Credit lines/ letter of credit/ certificates from Nationalized banks for meeting the fund requirement etc.) for particularly this work only. (Unconditional) in given format

To qualify for award of this contract each tenderer in his name should have in the last five years period (i.e., 2019-20 to 2023-24) Turnover Certificate obtained from Charted Accountant and achieved in at least two financial years an average Annual Financial Turnover (in all classes of civil Engineering construction works only) of Rs.10,06,363.84 usually not less than the estimated cost under this contract

In last five years (i.e., 2019-20 to 2023-24) Satisfactorily completed as a prime contractor for at least one similar nature of work done 50% of the cost of the work i.e., not less than the amount Rs 5.03 lakhs, certificate issued from the rank of Executive Engineer and above for the same should be furnished by the contractor.

Contractor should not quote above SR Rate.

Contractor should complete the work 6 months.

To qualify for award of this contract, each Tenderer in its name should have in the last five years Executed in any one year, the following minimum 80 Perc quantities of work in last five years 1. RCC/PCC-14.632 Cum, 2.Steel-1510 Kg, 3.Plastering- 306.112 Sqm, 4.Flooring- 284.00 Sqm, 5.Painting- 306.00 Sqm

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹25,200

Important Dates

Last Activity

28 Nov 2024

Published

28 Nov 2024

Download Ends

5 Dec 2024

BOQ Preview

•

Construction of Anganawadi Kendra-8 in Tadakod of Tadakod Gram Panchayat in Dharwad Taluk

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacen...

•

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

•

Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

•

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in al...

•

In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) with Acid and alkali resistant tile.

•

Providing flooring with 25mm thick polished Cuddapah slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mi...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 ltr/10 m² over and including one coat ...

•

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

•

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

•

Providing wall black boards in 12mm thick with CM 1:3 and applied with primer & two coats of acrylic emulsion black paint including finishing etc.,complete.

•

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

•

WATER SUPPLY WORK : Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perf...

•

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

•

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 90 mm long, weighing not less than 93 g

•

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

•

Polyethylene water storage tank with cover and suitable locking arrangement.

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm dia

•

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

•

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

•

Providing and fixing 100 mm sand cast Iron grating for gully trap

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...

•

ELECTRIFICATION WORKS : Concealed Conduit System Supplying heavy gauge PVC conduit pipe.mmdia.mm thick confirming to IS2509 with suitablesize bends, metal/ PVC Junction boxes, adhesive paste etc.,and ...

•

Extra for groove cutting in brick wall/cc floor to the suitable depth for concealing of conduct/GI pipe and plastering finishing uo to wall surface complete uo to 50mm conduct cc floor.

•

Point wiring using Copper wire with switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulat...

•

Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring us...

•

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box.

•

Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete.12"x12"x3" (300 x...

•

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

•

Supplying 4mm thick Plastic sheet with necessary nitches for fixing switches, regulators etc., and fixing on existing wooden or metal box using N.F screws (4 mm Plastic sheet)

•

Supplying and fixing of retrofit type - LED bulb.W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K, CRI Greater Than 70 Percent. efficacy Greater Than 80 lumen per watt, lif...

•

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double bal...

•

Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing 5 amps. ceiling rose, necessar...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

•

AQUA INTERNATIONAL Potable water purification system with inbuilt water cooler. RO AQUA INTERNATIONALR (AI WC 40/40/25) Product Id: 5116877-88445515773 [GeM Govt e Market Place] India.gov.in National ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

10585.doc

Tender Document • 0.19 MB

tadakod estimate.pdf

Others - Detail Estimate • 6.64 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Tender ID

Karnataka

Retender

Works

Buildings

Construction of Anganawadi Kendra-8 in Tadakod of Tadakod Gram Panchayat in Dharwad Taluk

Rural Development and Panchayat Raj Department

RDPR Division Office Daharwad | Karnataka

Amount: ₹10.1 LCloses: 6 Dec 2024Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published28 Nov 2024
Closed6 Dec 2024
Retendered28 Nov 2024