Renovation Badminton Court Sports Complex, Sector-27, Chandigarh

Providing and fixing air cushion Badminton court teak wood flooring on existing cement Flooring. The flooring must consist of 3 parts on the base 10mm Thick air cushion pads to be stapled at suitable distance on the top of cushions pine wood runners of 70mm x 45mm treated with antisemite solution to be fixed on the top of pine wood runners. The surface board made of kilned seasoned treated imported teak wood finished with 21mm thick, 57 to 83mm width and in random length with Tongue and groove Shaped. the edges of board must have finger lock groove and the bottom side with air pass groove. The board must be treated with special anti-termite and water-resistant lacquer. After installation the floor must be machine sanded in uniform level and finished with water-based Pu polish with proper marking up to Entire satisfaction of Engineer-in-charge The cost further include es the antiteremite piping system with in the base frame work the grunter period of five years is also included. (N.S.)

Providing and fixing Carlton, Yonex or equivalent brand badminton court mat of thickness 4.5mm with shock absorption 30%. The mat must be 100% pure vinyle with reinforcing biber glass layer including pvc foaming buffer layer for shock absorption. The mat is to be installed with double tapes and hot thermo welding cord including the markings as per standard requirements upto the entire satisfaction of engineer in charge. The cost further includes the minimum guarantee period of 5 years. (N.S.)

Providing and fixing 35mm thick phenol bounded factory manufactured solid flush door shutter ISI marked with both side commercial face in the existing chowkhat. The rate includes the cost of iron hinges, all necessary Aluminium fittings and painting two coats over one coat of primer after preparation of surface (special quality) complete in all respect to the entire satisfaction of Engineer-in-charge.(N.S.)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) (As per DSR 21.1.1.1)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (As per DSR 21.3.2)

Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge. (N.S.)

Providing and laying vitrified floor tiles of size 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. The tiles are to be fixed with 3mm grove using spacers. The tiles are to be laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm The grove are to be filled with cementitious grout mix with proportion of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material. Double charge vitrified tile of size 600x600 mm (N.S.)