Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.1 CrAccepted-AOC 227 2 5TH B MAIN ROAD 2ND BLOCK HRBR LAYOUT KALYAN NAGAR BANASAWADI BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | ₹1.1 Cr | L1 | Accepted-AOC LOWEST |
| 2 | L2₹1.1 Cr+₹1.6 L (1.44%)Rejected-AOC NO 9A VINAYAKANILAYA KANAKA GANAPATHI STREET OM SHAKTHI LAYOUT KANAKAGIRI HORAMAVU POST BANGALORE 560 043 | BENGALURU URBAN | KARNATAKA | 560043 | ₹1.1 Cr+₹1.6 L (1.44%) | L2 | Rejected-AOC NOT LOWEST |
| 3 | L3₹1.1 Cr+₹2.4 L (2.20%)Rejected-AOC | ₹1.1 Cr+₹2.4 L (2.20%) | L3 | Rejected-AOC NOT LOWEST |
| 4 | L4₹1.1 Cr+₹5.3 L (4.84%)Rejected-AOC 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | ₹1.1 Cr+₹5.3 L (4.84%) | L4 | Rejected-AOC NOT LOWEST |
| 5 | L5₹1.2 Cr+₹7.3 L (6.71%)Rejected-AOC 6TH CROSS STREET KAMARAJ NAGAR PALAYAMKOTTAI | PALAYAMKOTTAI | TIRUNELVELI | TAMIL NADU | 627002 | ₹1.2 Cr+₹7.3 L (6.71%) | L5 | Rejected-AOC NOT LOWEST |
| Sl No | Description | Qty | Unit | B5BUILDING SOLUTIONS L7 | PRAGATHI BUILDERS L8 | G K CONSTRUCTIONS L4 | Sai Ram Builders L6 | M/s BHOOMI ELECTRICALS L1 | PRACHANIVA CONSTRUCTIONS L2 | Meghana and Gowda Enterprises L3 | M/S POTHIRAJ AND CO L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed | 50 | Cum | 475 ₹23,750 | 700 ₹35,000 | 400 ₹20,000 | 550 ₹27,500 | 350 ₹17,500 Lowest | 350 ₹17,500 Lowest | 400 ₹20,000 | 550 ₹27,500 |
| 2.00 | Demolition of un-reinforced cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed | 82.75 | Cum | 500 ₹41,375 | 700 ₹57,925 | 400 ₹33,100 Lowest | 550 ₹45,512.5 | 400 ₹33,100 Lowest | 400 ₹33,100 Lowest | 400 ₹33,100 Lowest | 600 ₹49,650 |
| 3.00 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each including making good the disturbed surfaces to match adjoining surfaces etc complete all as specified and as directed | 208 | Each | 150 ₹31,200 | 250 ₹52,000 | 100 ₹20,800 Lowest | 150 ₹31,200 | 100 ₹20,800 Lowest | 100 ₹20,800 Lowest | 150 ₹31,200 | 180 ₹37,440 |
| 4.00 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc 1.5sqm but not exc 4 sqm each including making good the disturbed surfaces to match adjoining surfaces etc complete all as specified and as directed | 128 | Each | 175 ₹22,400 | 300 ₹38,400 | 150 ₹19,200 | 220 ₹28,160 | 150 ₹19,200 | 125 ₹16,000 Lowest | 150 ₹19,200 | 220 ₹28,160 |
| 5.00 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed | 1,400 | Sqm | 40 ₹56,000 | 45 ₹63,000 | 20 ₹28,000 | 40 ₹56,000 | 15 ₹21,000 Lowest | 18 ₹25,200 | 50 ₹70,000 | 35 ₹49,000 |
| 6.00 | M&L for Plain cement concrete (1:4:8) type D - 2 using 40mm graded stone aggregate as in 75 mm thick sub base to flooing etc complete all as specified and as directed | 160 | Sqm | 350 ₹56,000 | 400 ₹64,000 | 400 ₹64,000 | 450 ₹72,000 | 280 ₹44,800 | 200 ₹32,000 Lowest | 330 ₹52,800 | 290 ₹46,400 |
| 7.00 | M&L for Plain Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate) as in 25 mm thick levelling course of flooing etc complete all as specified and as directed | 780 | Sqm | 275 ₹2,14,500 | 250 ₹1,95,000 | 190 ₹1,48,200 | 160 ₹1,24,800 | 180 ₹1,40,400 | 101 ₹78,780 Lowest | 220 ₹1,71,600 | 150 ₹1,17,000 |
| 8.00 | M&L for PCC 1:3:6, type C-1, using 20 mm graded aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement, laid in panels & filling joints with mortar, etc., complete all as specified and directed. | 300 | Sqm | 350 ₹1,05,000 | 350 ₹1,05,000 | 450 ₹1,35,000 | 450 ₹1,35,000 | 350 ₹1,05,000 | 290 ₹87,000 Lowest | 365 ₹1,09,500 | 320 ₹96,000 |
| 9.00 | M & L for Vitrified Ceramic tiles 10 mm thick dark shade tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth tiling etc complete all as specified and as directed | 600 | Sqm | 990 ₹5,94,000 Lowest | 1,200 ₹7,20,000 | 1,099 ₹6,59,400 | 1,200 ₹7,20,000 | 1,100 ₹6,60,000 | 995 ₹5,97,000 | 1,050 ₹6,30,000 | 1,170 ₹7,02,000 |
| 10.00 | M & L for Vitrified Ceramic tiles 10 mm thick dark shade tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:3) including dismantling wall tiling etc complete all as specified and as directed | 180 | Sqm | 1,050 ₹1,89,000 | 1,250 ₹2,25,000 | 1,099 ₹1,97,820 | 1,250 ₹2,25,000 | 1,110 ₹1,99,800 | 1,015 ₹1,82,700 Lowest | 1,200 ₹2,16,000 | 1,170 ₹2,10,600 |
Tender Value
₹1.4 Cr
EMD Value
₹2.1 L
Closing Date
16 Aug 2025, 6:00 pmClosed
COL VIBHOR JAIN, CWE
CWE (ARMY) BANGALORE, 101, DICKENSON ROAD, BANGALORE - 560042
SPECIAL REPAIRS TO BLDGS No. P - 150 AND P - 143 AT ASSAYE LINE, 515 ABW UNDER GE (NORTH) BANGALORE
2025_MES_720047_1
86416/E8
Open Tender
Civil Works
Item Rate
270 days
CWE (ARMY) BANGALORE
AS PER TENDER
8 documents required · 8 mandatory
₹1,000
GE (NORTH) BANGALORE
₹2.1 L
6 Oct 2025
12 Jul 2025
23 Aug 2025
12 Jul 2025
16 Aug 2025
26 Jul 2025
12 Jul 2025 - 19 Jul 2025
Amount
Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed
Demolition of un-reinforced cement Concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each including making good the disturbed surfaces to match adjoining surfaces etc complete all as specified and as directed
Taking down chowkats or frames with shutters (without taking off shutter from frames) exc 1.5sqm but not exc 4 sqm each including making good the disturbed surfaces to match adjoining surfaces etc complete all as specified and as directed
Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed
M&L for Plain cement concrete (1:4:8) type D - 2 using 40mm graded stone aggregate as in 75 mm thick sub base to flooing etc complete all as specified and as directed
M&L for Plain Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate) as in 25 mm thick levelling course of flooing etc complete all as specified and as directed
M&L for PCC 1:3:6, type C-1, using 20 mm graded aggregates as in 75 mm thick plinth protection etc, finished even and smooth without using extra cement, laid in panels & filling joints with mortar, etc., complete all as specified and directed.
M & L for Vitrified Ceramic tiles 10 mm thick dark shade tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth tiling etc complete all as specified and as directed
M & L for Vitrified Ceramic tiles 10 mm thick dark shade tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick backing coat in cement mortar (1:3) including dismantling wall tiling etc complete all as specified and as directed
M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed bed in CM 1:6 including dismantling floor, hearth tiling etc complete all as specified and as directed
M&L for screed bed or bedding layer of 20mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed
M&L Glazed ceramic coloured tiles 350X 250X 7mm / 450X 350X 7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10 mm thick backing coat in cement mortar (1:4) including dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M & L for Granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed
M&L for Pre-cast Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregates as in solid block masonary, exc 10 cm in width and setting in CM (1:6) including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.
M&L for Walling of Stone Masonry squared rubble, uncoursed well bonded, bedded and solidly hearted, built in CM (1:6) etc including demolition of brick Work / Stone Masonry/PCC block masonry built in cement mortar of any description all as specified and directed.
M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar (1:4) etc complete all as specified and as directed
M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM (1:4) including raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed
M&L for Reinforced Cement Concerete (1:2:4) type B-0, using 20mm graded stone aggregate, nominal mix, as in Chajja by complete removing of damaged portion including removing the rusted portion of steel iron including necessary form work etc complete all as specified and as direted Notes : Reinforcement shall be measured and paid seperately
M&L for Pre-cast cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) etc including demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed
Cutting holes into or through in stone walls, built in cement mortar or cement concerete , superficial area exc 150 Sqcm but not exc 400 sqm Cm etc complete all as specified and as directed
M&L for rendering 5 mm thick in cement mortar (1:3) on fair faces of ceiling concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed
M&L for rendering 15 mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement etc complete all as specified and as directed
M&L for rendering 15 mm thick in cement mortar (1:4) on other than fair faces of brick work or concrete/stone masonry surface finsihed even and smooth without using extra cement mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately
M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating as per following specification including taking down existing treatment with PCC and removing debris beyond the premises of site :- (i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) Cement screed 20mm thick in cement mortar (1:3) mixed with liquid water proofing compound as per manufacturer instruction finished even & smooth. (iv) Provide 40mm dia medium grade GI spout at the lowest point with 30cm projection beyond the out face of the wall.
M&L for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in filling in sunken slab or similar work complete all as specified and directed.
M&L for Plain cement concrete (1:2:4) type B-0 using 12.50mm graded stone aggregate as in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.
M&L for providing water proofing treatment to RCC slab with following specification including taking down existing roof treatment along with cement plastering etc complete all as specified and directed. :- (i) Removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth. (ii) Screed bed 10 mm thick in cement mortar (1:3) over concrete surface mixed with and incl water proofing compound as per manufacturer instruction. (iii) After curing & dry, apply compatible primer / bonding bitumen @ 0.40 Litr/Sqm (iv) Laying 3 mm thick APP modified water proofing membrane, weight not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished and torch applications of membrane with 75mm side overlap and 100mm end lap (v) After necessary preparation of surface and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm.
Supply only water proofing compound (Liquid), ISI marked, complete all as specified and as directed.
S&F Pressed steel frame of size 125 X 60 mm for door using 1.25 mm thick M S sheet with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed
M&L for cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate as in hold fast and filling of pressed steel chowkat etc complete all as specified and as directed
M&L for Mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde E-165 etc complete all as specified and as directed
S&F Flush shutter 35mm thick solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed
S & F Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed
S & F in repairs Prelaminated particle board 18 / 19mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in kitchen cabinet or cupboards all as specified and as directed
M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class soft wood fixed to cupboard shutter not exc 3 sqcm cross section area all as specified and directed.
S & F in repairs Cupboard knobs 40 mm dia fixed with nut, screw and washer of brass, polished complete all as specified and as directed.
S & F in repairs Continuous (piano) hinges, 30 mm width of flap (when open), mild steel, bright finish or electro galvanised etc complete all as specified and as directed
S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.
S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed
S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary handles, hinges, tower vbolts etc joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete all as specified and as directed
S&F Sheet glass 4mm thick of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed
S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane etc complete all as specified and as directed
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed
S&F Butt hinges 100 mm size, medium weight, Stainless steel and fixed etc complete all as specified and as directed
S&F Aluminium handle 150 mm size, cast type, anodised etc complete all as specified and as directed
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150 mm, fixed in floor etc complete all as specified and as directed
S&F Aluminium Hasp and staple 100 mm size, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed
S&F in repair Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed
S&F in repair Vitreous china wash down water closet pan (pedestral Pattern), white, connecting to flush pipe, flushing cistern etc including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed
S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, waste stainless steel coupling 32 mm bore and LDPE waste pipe 600 mm long complete all as specified and directed.
S&F in repair PVC flushing cistern with flush out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, etc complete all as specified and as directed
S&F in repair Bib taps 15mm dia, cast copper alloy with crutch or butterfly handle, screwed down, fancy type, Chromium plated screwed for iron pipe or for brass ferrule etc complete all as specified and as directed
S&F in repair Mixer for mixing hot and cold water, suitable to 15mm dia of pipe, Brass chromium plated, complete all as specified and as directed
S&F in repair Angle / Stop / Concealed cock 15mm dia bore, fancy type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and as directed
S & F in repairs Centre hole Basin mixture W/o Pop Up 15 mm dia bore, brass chromium plated all as specified and as directed. (Note : Cat No 6850 Marcus series of Prayag or equivalent make specified in P S)
S & F in repairs Sink mixture with regular spout wall mounted, with flange, brass chromium plated, 15 mm dia all as specified and as directed. (Note :Cat No 6855 Marcus series of Prayag or equivalent make specified in P S)
S&F in repairs Overhead shower ABS 112mm dia with brass CP Arm 225mm long & flange including fixing to steel pipe 15mm dia or union complete all as specified and as directed. (Note : Cat No BS-67 of Prayag or equivalent make specified in P S)
S & F in repair Bib Cock 2 way double handle, brass chromium plated with flange all as specified and as directed. (Cat No-6812 Marcus series of Prayag or equivalent make as specified in CA)
S&F in repairs Health faucet, brass body chromium plated with 1mtr SS braided tube & wall hook complete all as specified and as directed
S&F in repairs Soap dish, brass chromium plated, fixed in wall as per manufacturers instruction complete all as specified and as directed. (Note : Cat Part No BA-45 of Prayag or equivlaent make specified in P S)
S & F in repairs Looking Mirror 600x450mm, 5-6mm thick with Plastic frame, hanging system etc complete all as specified and directed
S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm, with suitable compartment including fixing to wall complete all as specified and directed
S&F in repairs Stainless steel plate rack of size 900mm x 900mm, 250mm width, made of 0.63mm thick Stailess steel sheet, including fixing to wall complete all as specified and as directed
S&F in repairs Stainless Steel Towel rail 450 mm long including fixing arrangement etc complete all as specified and as directed
S&F in repairs stainless steel towel ring 200mm dia including fixing arrangement etc complete all as specified and as directed
S&F in repairs Unbreakable corner Glass Shelf 300mm (Brass Bracket) complete all as specified and directed
S&F in repairs Brass peg set of six, fixed on wall as per manufacturers instruction, complete all as specified and directed
S & F CPVC pipes 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors including taking down existing GI/CPVC pipe line etc complete all as specified and directed
S & F CPVC pipes 25mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified and directed
S&F in repairs rotational moulded polythelene water storage tank 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I including PTMT float valve 25 mm dia high pressure of with epoxy coated aluminium rod & high density plastic ball etc (Minimum weight 25mm-455gms) complete all as specified and directed
S & F in repairs gun metal, globe or gate valve 25 mm dia with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
S&F PVC connection 600mm long 15mm dia with PTMT nuts complete all as specified and as directed.
S&F in repairs PVC (SWR) Multi floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and as directed
S&F PVC (SWR) pipes 110 mm dia bore, single socketed in any length with rubber ring joint laid in trenches or in floor etc including dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joint fixed on walls etc including dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joint laid in trenches or in floors including dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joint fixed on walls including dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F PVC (SWR) bends 110 mm dia (any radius) etc complete all as specified and as directed
S&F PVC (SWR) bends 110 mm dia (any radius) with acess door etc complete all as specified and as directed
S&F PVC (SWR) Junction (Single T) equal or unequal 110 mm dia etc complete all as specified and as directed
S&F PVC (SWR) Junction (Single T) equal or unequal with access door, 110 mm dia, etc complete all as specified and as directed
S&F PVC (SWR) bends 75mm dia bore (any radius) etc complete all as specified and as directed
S&F PVC (SWR) bends 75mm dia bore (any radius) with acess door etc complete all as specified and as directed
S&F PVC (SWR) Junction (Single T) equal or unequal 75mm dia bore etc complete all as specified and as directed
S&F PVC (SWR) Junction (Single T) equal or unequal with access door 75 mm dia etc complete all as specified and as directed
S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 110 mm dia bore etc complete all as specified and as directed .
S&F PVC SWR branch pieces, single (equal or unequal), Single Y equal or unequal 75mm dia etc complete all as specified and as directed .
S&F in repairs PVC (SWR) vent cowls 110 mm dia bore complete all as specified and as directed .
S&F PVC (SWR) vent cowls 75 mm dia bore complete all as specified and as directed .
Complete removal of existing treatment of wall surface (Internal and External) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed
M&L for preparation of new / old plastered surface with sand paper etc to obtain smooth surface and applying 2mm thick wall care putty finished to smooth surface complete all as specified and as directed
M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed
M&L for Preparing Old treated ceiling surface and applying one coat of white wash complete all as specified and as directed
M&L for Preparing new plastered suface of walls and applying two coats of distemper acrylic emulsion, white or tinted over a coat of alkali resistance primer complete all as specified and as directed
M&L for Preparing old treated suface of walls and applying one coat of distemper acrylic emulsion complete all as specified and as directed
M&L for Preparing Old treated wall surface and applying two coat of white wash etc complete all as specified and as directed
M&L for Preparing New plastered wall surface and applying three coats of white wash complete all as specified and as directed
M&L for Preparing new /Old Previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.
M&L for Preparation of old or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint etc complete all as specified and as directed
S&F in repairs stainless steel decorative curtain rod of 25 mm dia bore with wood finishes, 304grade (weight not less 400 gms per running meter) including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed
S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed
Removing building materials etc. to a distance of exc 100.00 m but not exc 1.00 KM, including loading, unloading and stacking at the destination etc complete all as specified and as directed
M & L for sparing antiweed/non toxic solution/chemicals containing Glyphosate as per manufacturer instructions and removing the weed including the roots after ensuring complete de-germification pf plant/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B-1 or cement mortar 1:2 or brick work in CM (1:4) plastered with CM (1:4) to match with existing surfaces and repairing the pipes and joints which was effected by cutting down/taking out process for plants/tress located on the bldgs at any height of bldgs complete all as specified and as directed
M & L for broken stone or boulder hardcore of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed
M&L for Plain cement concrete (1: 4:8) type D-2 using 40mm graded stone aggregate as in 75 mm thick sub base to the flooring complete all as specified and as directed
M&L for Pre-cast cement concrete paver block 60mm thick of M-35 grade, factory made chamfered edge with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed
Removal of surplus soil to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed
M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and as directed
M & L for Preparation of new plaster or concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic ennamel paint over a coat of priming paint plaster complete all as specified and as directed
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dence soil all as specified and as directed
M & L for Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed
Material and labour for pre-cast cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in solid block masonry exc 10cm in width and setting in CM 1:4 all as specified and as directed
M & L for Double wall corrugated polyethelene (DWCPE) Sewage pipes 150 mm Inner dia bore, class SN-8 including sealing of joints, fittings etc complete with collars complete all as specified and directed
M & L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes 150mm dia bore including packing under and haunching against the sides of pipes including testing complete all as specified and directed
M & L for Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping including weathering slightly rounded or chamfered angles and throating and including necessary form work complete all as specified and directed
M & L for Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed
M & L for TMT bars 6mm dia to 8mm dia cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.
M & L for Mild steel round bars 10mm dia & over, Fe 290 (Gde - E-165), cut to length, bent to shape required,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.
Returning,filling including, spreading, levelling , watering and well ramming inlayers not exceeding 25 cm in any type of soil.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. all as specified and directed.
Supply only integral water proofing compound (ISI marked) all as specified and directed.
Cutting exising manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel(1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching to inner 150mm dia pipe all as specified and directed.
Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.
M & L for surface type Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 1.5Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following :-
One light /bell point controlled by one switch
One fan / Exhaust point controlled by one switch / regulator
One 3 pin socket out let 5 Amps on independent board
One 3 pin socket out let 5 Amps on same board
One light point controlled by two 2 - way switch
M & L for surface type Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded FRLS copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit medium grade ISI marked with accessories including MS terminal boxes fabricated with 1.6 mm thick MS sheet concealed on walls with laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, etc., including provision of 2.5Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.
Note for Item No.130 to 131 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring
S&F in repair of ceiling rose, surface bakelite type 65 x 50mm, 2 to 3 terminals all as specified and as directed
S&F in repairs Switch piano flush type, single pole, one way 5 Amps, 240volts all as specified and as directed
S&F in repairs of Switch socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal 240voltsall as specified and as directed
S&F in repairs of switch piano flush type, single pole, two way 5 Amps 240volts all as specified and as directed
S&F in repairs of socket outlet 2 in 1, 3 pin 5 Amps 240volts all as specified and as directed
S&F in repairs of socket outlet 2 in 1, 3 pin 16 Amps flush type 240volts all as specified and as directed
S&F in repairs of switch piano flush type single pole one way 16 Amps 240volts all as specified and as directed
S&F in repairs of switch socket combination 5 pin, 2 in 1, 5 Amps, Flush type all as specified and as directed
S&F in repairs of stepped type electronic fan regulator, flush switch type all as specified and as directed
S&F in repairs LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing fitted with engg plasticend caps, opal diffuser, integrated LED channel complete with all accessories including taking out old fittings all as specified and directed.
S&F in repairs LED batten suitable for indoor applications 10 Watts, 2 feet with polycarbonate housing & integrated LED channel with white arcylic cover complete with all accessories including taking out old fittings all as specified and directed.
S&F Angle holder, PVC/polycarbonate made, 240 volts all as specified and as directed.
S&F LED lamp 09 watt suitable to fit in angle holder all as specified and directed.
M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm, 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr, connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I and as specified or indicated and testing on completion including necessary earth work and excavation in any type of soil. PCC (1:3:6) type C1 chamber, pre cast cement concrete 40mm thick slab in (1:2:4) type B1 with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways including funnel with G I medium grade watering pipe, G I light grade protection pipe, wire mesh and lugs, test point complete all as specified and as directed.
S&F in repairs MCB Distribution board, TPN 4 way suitable for MCB TPN as I/C with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.
S&F in repairs MCB Distribution board, SPN 8 way, double door type 240 volts with 200 Amps rated busbar as specified and as directed.
S&F in repairs MCB TPN 63 Amps, 415 volts, 10KA, 'C' curve, complete all as specified and as directed
S&F in repairs MCB single pole 240 volts 5 to 32 Amps, 'C' curve, complete all as specified and as directed
S&F in repairs MCB SPN 240 volts 32/40 Amps, 'C' curve, complete all as specified and as directed
S&F in repairs sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with & including suitable size PVC conduit all as specified and as directed. (Note : Three run of 6sqmm cable and one run of conduit altogether measured as one unit)
Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades and refixing back to its original position after repair all as specified and as directed
M&L for cleaning celing fans complete, removing all dust, filling cavities with filler etc. and spray one coat of synthetic enamel paint using spray gun all as specified and as directed
M&L for M&L for rewinding of ceiling fan of size 1200mm sweep, 230 volt, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding & reassembling etc complete all as directed. (NOte : Taking down & re-fixing shall be measured seperately)
S&F in repairs Bell push flush type 5Amp, 240 volts all as specified and as directed .
S & F Buzzer, Ding dong AC, 230 volts, single pole all as specified and as directed.
S&F Exhaust fan 300 mm sweep AC single phase, 230/ 240 Volts with louvers fixed outside with all accessories including fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm etc complete all as specified and as directed.
Supply and fixing LED 30 Watts building security light, having high power LED with pressure die cast housing prismatic polycarbonate diffuser, IP 66 protection and impact resistance of IK08. 4kV inbuilt surge protection with Top opening driver cover for easy maintenance complete all as specified and as directed.
S&F Water heater Storage type 25 Ltrs capacity, BEE 5 star rated complete including steel wired connection pipe for hot/cold water, angle valve for inlet and out let water etc complete all as specified and directed at site.
supply, laying & testing XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable lugs including neccessary road crossing if applicable and taking out the existing unserviceable cable for following size :-
4 Core x 16 Sqmm
4 Core x 35 Sqmm
PRACHANIVA CONSTRUCTIONS (BID ID -3395330)
Meghana and Gowda Enterprises (BID ID -3396003)
G K CONSTRUCTIONS (BID ID -3387729)
M/S POTHIRAJ AND CO (BID ID -3396156)
Sai Ram Builders (BID ID -3388029)
B5BUILDING SOLUTIONS (BID ID -3376991)
PRAGATHI BUILDERS (BID ID -3384233)
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .