SPECIAL REPAIR AND ADDITIONAL ALTERATION OF BLDG NO P 224 PTA HANGER AT LCII ITR CHANDIPUR

Amount

B/R PORTION Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M&L for light shade vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 , complete all as specified.

M&L for light shade vetrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, for works on vertical surfaces such as skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick backing coat in CM 1:4 complete all as specified

M&L for non skid coloured ceramic tiles, area of ech tile exc 0.06 exc but n exc 0.11 sqm 7-8 mm thick as in floor finish set and jointed in near cement slurry abd pointed in white or coloured cement to match 15mm thick screed bed CM 1:6 complete all as speicifed

Glazed coloured ceramic tiles size of each tile (300X450mm) 7mm thick foir works on vertical surfaces such as skirting/dados etc set and jointed in neat cement slurry and pointed in coloured cement to match including backing coat 10mm thick cement mortar 1:3

Demolition of cement concrete of any description in any position not otherwise specially provided for

M&L PCC 1:2:4 type B0 using 12.5 mm stone aggregate as in padding and in any situation finising even and fair thickness 50mm. Concrete for getting proper slope/covering as specified. PCC shall be done mixer machine only

M&L for rendering 10mm thick avg in cement mortar 1:4 over roof surfaces mixed with WPC as per manufactures instructions, finished even and smooth without using extra cement after preparation of surfaces, WPC will be measered separately complete all as specified.

M&L roof treatment using APP based polymeric membrane minimum weighting 3.5kg/sqm and min 3 mm thick reinforcement with polyster non woven fabric (wt not less than 150gms/sqm over a coat of bitumen priming and bounded surface by forced application including taking down old felt complete all as specified and directed by Engr-in-Charge.

M&L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed by Engr-in-Charge.

Supply only water proofing compund

Dismantling asbestors cement (corrugated, semicorrugated etc) sheets in roof coverings

Dismantling structual steel work

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings heads shoes bends swan-necks etc

M&L for prepainted galvalume aluminium zinc coating GI based corugated steel 0.5mm thick of any clour having tensile strangth of 550mpa as in roof covering to wall fixed with self tapping screws or L or J type hook completely all as specified

M&L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an color having temsile strength of 550mpa as in roof covering to wall fixed with self tapping screws of L or J type hook completely all as specified

M&L for 2mm thick fibre glass reinforcement translucant corrugated sheeting with two corrugations side lap fixed with L/J type cranked hook in lieu of screw

S&F 0.56 mm thick plain , aluminum sheeting , alloy 31000 H4 in ridges, hips, valley gutter, drip and straigth falsing (length and girth as fixed)

S&F mild steel angle , bars, flat work as in wind tiles, support for vally gutter for roof including securing bilts posts and drilling holes

S&F roof trusses(framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket freaming (beam, tee, angle) channel or flat section) including distance pieces, cleats etc FE 410-W 9gde E-250 quality A

S&F roof ventilator for high exhaust capacity size 360 dia of obase is always spinning and centilating, ventilaor rotation at evesn wind speed of less than 1km per hour (Consisting of ventilaor top of aluminium with intergrated and reinforced main bearing housing, oand shaft should be stainless steel, base should obe metal base roof profile. Rotating bearing should twin Z2 ball bearing encased in single integrated bearing housing assembly inluding all accessories for completed fixing and as directed by Engr-in-Charge)

M&L for preparation of new steel surface exc 10cm width or girth and applying one coat of red oxider primer and two coat of synthetic enemal paint glossy all as specified

S&F in repair 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.

S&F PVC (SWR) bends any radious bore in dia 160mm

S&F in repair steel rolling shutters with 1.25 mm lathing with ball bearing as specified including top cover, anchoring rod, hasp and stape and one shop coat of primer, erected in position as indicated complete push pull or manual type all as specfied.

S&F safety lever locks mild steel with 4 levers fo rolling shutter

Taking down chowkats or framnes with shutters (without taking off shutters from frames) area not exc 1.5 sqm ech, incl cutting holes for taking taking out hold fasts or dismantling brick work (holes cut and other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specifoed and directed by Engineer-in-Charge

Taking down chowkats or framnes with shutters (without taking off shutters from frames) area exceeding 1.5 sqm not exc 4 sqm each, incl cutting holes for taking taking out hold fasts or dismantling brick work (holes cut and other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specifoed and directed by Engineer-in-Charge

S&F Powder coated aluminium frame for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (thickness of power coating not less than 50 micron).

S&F Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.(Thickness of power coating not less than 50 micron).

S&F Powder coated aluminium window and ventilator shutter side hung type without sash bars , aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing, , anodised aluminium snap beading, screws , anodised aluminium fittings such as peg stays 150 mm long(1 no), hinges type B-21 100 mm long (2 nos) suitable handle ( 1 no) in each shutter complete all as specified.

Supply & Fixed 4.80 mm thick sheet glass ordinary quality exc 0.5 sqm in each pane fixed to aluminium frame complete all as specified and directed

M&L Solar control film 25 micron reflective type sticked to glass panes as per instructions of mfg all as specified.

M&L for 12mm thick premalinated particle board exterio grade ,prelaminated with boath side with decorative choice all as specified.

S&F in repair Door closer hydralically regulated, designation No3 universal type door shutters of 851 to 1000mm in with and of weight between 61 to 80 kg and fixed @09155 (Aluminium body) suitable all as specified and as directed by Engr-in-Charge.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire steples all as specified

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F factory made solid PVC door shutter, 30mm thick (style) consisting of frame made out of ms tabes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip at 20mm width stuck inside with solvent cement for stiles and prelam PVC sheet for top rail lock rail & bottom rail on either side & gap insert for top rail & bottom rail, paneling of prelam colour pvc sheet to be fitted in the MS frame welded /scaled to the stiles & rails with suitable pvc sheet beading, and jointed to gether with solvent cement stiles and reils feathered at edges all as per sepcificationc & draving

S&F 100mm long But hingess,extruded aluminium alloy with Galvanised MS Hinges pin anodised and fixed, type B-21

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section.

S&F 150mm long Aluminium handles cast type, anodised, complete, all as specified .

S&F in repairs Rotational moulded polythyelene water storage tanks 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position including 15mm ball valve high presure and all accessaries with dismantling and removing complete all as specified.

Taking up or down 15mm bore steel tubing and connections, incl cleaning for re-fixing or removal to store.

Taking up or down 20mm bore steel tubing and connections, incl cleaning for re-fixing or removal to store.

S&F 15mm dia steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (suchas bends,elbows, tee, short pieces, connectors, back nuts, diminishigs, unions etc) including taking down old tubing all as specified.

All as per item No 45 mentioned here in above but 20 mm dia.

S&F in repair Vitreous China wash hand basin, white, flat back, size 550X400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or errecting stand, 32/40 mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper complete all as specified and directed by Engineer-in-charge.

M&L 18 to 20mm thick black/saffron granite slab of any type in steps, pillars, platforms of basin cement (1:4) including pointing in white/coloured cement 1:2 using marble dust with admixture of pigment to match with shade of granite cutting polishing and rounding to edge over 15mm thick screed bed layer in cement mortar 1:4 complete all as specified

S&F in repair brass chromium plated tubular towel rail 20 mm dia "D" type 60 cm long between flanges complete all as specified and directed by Engineer-in-charge.

S&F in repair Vitreous china water closet, pedestal type, white including flushpipe, seat cover etc, including 10 Ltrs capacity PVC flushing cistren, connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified.

M&L health faucet Abs with double lock 1.2mtr stainless steel flexinble hose and wall hook (cat No F160001 Make Hindware or equivalent)

S&F bib tap, two in one short body fancy type cast copper alloy brass chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15mm (Make Hindware cat No 200004 FT or equivalent ) all as specified.

S &F in repair Vitreous China urinals, bowI type (back or corner wall type) size 465x355x265mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; grating and Union for discharge pipe.

S&F in repair 15mm dia stop valves, Fancy type chromium plated screwed down high pressure fancy typ , screwed both ends for iron pipe or for unions and fixed.

S&F 15mm dia stop valves, Fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

M&L for PVC connections 15 mm size with PTMT nuts of length 450 mm.

PVC (SWR) floor trap, 75 mm dia outlet plain with 125mm dia steel grating including jointing with solvent cement .

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia and weight exc 2.5 kg to n exc 4 kg per sqm or fixing with galvanised steel staples supplied and fixed complete to steel members.

S&F in repair 1.60mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to steel framing with plain 40mm lap joints with rivetec or welded seams, including bending or turning up mitred angles, etc as required all as specified

S&F Framed work as in doors or gates of angle or other section with other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides) and hanging. also fastening and fixed complete FE 410-w (gde-250 quality-A) all as specified.

Demolition of cement concrete (unreinforced)in groung floors and pavings not exc 15cm thick (below or above ground level. All as specified

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) for flooring and finished to an even and fair.

M&L prepolished Machine cut kota stone as in tread of steps18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including 15mm thick screed bed cement mortar 1:4 complete all as specified & directed by Engr-in-Charge.

M&L prepolished Machine cut kota stone as in riser of steps 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab including 10mm thick backing coat cement mortar 1:3 complete all as specified & directed by Engr-in-Charge.

M&L for stainless steel of grade SS-304 square rectangular or circular pipe of different size for stsructurasl shed balusters and raliling etc, including stainless steel cup and fixing/arc welding and bright finishing by polishing with grinding etc complete all as specified.

M&L 150mm thick PCC 1:2:4 type B2 (40mm stone aggregate) for flooring and finishing to an even and fair without using extra cement.

M&L coloured pre polished chequered cement concrete tiles of size 300x300x20mm thick laid over 15 mm thick screed bed of CM (1:4) jointed & pointed in neat cement slurry to match the colour complete all as specified.

M&L for one coat of synthitic enamel paint on steel surfaces including preparation of old surfaces.

M&L for removing loose and broken concrete by chiseling/picking etc upto a deapth of 30 to 100mm from coloumns, beams and similar structural members cutting edges clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water and removal of debris to a distance not exc 50m all as specified and including necessary scaffolding etc complete all as specified.

M&L for applying one coat of anti corrossive primer @0.25 Ltr/Sqm for the steel area to exposed old and new reinforcement to the full circumstances and length of bars to from unbroken 40 micron thick film all as specified.

M&L for applying one coat epoxsy agent @ 2.6 sqm/Ltr or as per manufactured instruction to old concrete surfaces all as specified and as directed by Engr-in-Charge to surfaces of columnd, beams and similar structural members all as specified make Nitobond EP of fosroc or equelent.

M&L for non shrink, cementitous micro concrete mixed with 12.5mm graded stone aggrigate using Renderoc RG equivalent by weight (18 Kg Aggregate : 25 Kg Renderoc RG) respectively (as per manufcatures instr) laid in average thickness 30 to 100mm in surfaces of columns, beams and similar structural members including use and waste of water tight form work to facilitate pouring of micro concrete all as specified and directed (Make Fosroc or Equivalent)

M&L mild steel TMT bar 10mm dia and over cut to length bent to shape with MS wire (annealed) not less than 0.90 mm dia complete.

All as per item No 74 mentioned here in above but 5mm dia and over upto 10mm dia.in stirups,spaces and binders

Taking down cement plaster on wall, ceiling, roof etc incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.

Rendering 10mm thick cement plaster in CM 1:6 on fair faces of brick work surfaces and finished with even and smooth without using extra cement.

Rendering 15mm thick cement plaster in CM 1:4 on fair faces of brick work surfaces and finished with even and smooth without using extra cement.

M&L for application of high build polymer modified mortar (1:2:5) mixed with 3Kg SBR per bag of cement in ceiling surfaces 10 to 20mm thick in two layers surfaces over a coat of bonding agent Nito Boand SBR (1 Ltr SBR +1 Ltr water + 3Kg Cement) applied as per manufactures instructions. Note Nito Bond SBR shall be form FOSROC or equivalent chemical in MC Bouchemics/ Beck

M&L Preparation of new plastered surfaces of ceiling and applying two coats of white wash.

M&L Preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of priming plasered surfaces with alkali resistant priming paint

M&L Preparation of newly plastered surfaces and applying two coats of exterier emulsion paint including 3mm thick wall care putty on external surfaces ovear a coat of alkali resistant primer all as specified by Engr-in Charge

E/M PORTION Taking down carefully concealed aluminum/copper point wiring (Light fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators socket, light fittings etc removing materials for taking credit and making good disturbed surfaces of wall, floor, etc.

M&L point wiring using approved colour coading as per IS with FRLSH PVC insulated copper conductor cables 1.5 sqmm (nonmial area) single core insulated and unsheathed stranded cable 1100 volts grade and including (ERW) stove enamelled steel conduit heavy duty ISI marked and unsheathed copper conductor 1.5 sqmm nominal area as earth wire as earth continuity conductor upto any length from maint bistribution board/ switch board to fitting complete all as specified and directed by Engr-in-charge for the following :-

Two light points controlled by one switch

Three light points controlled by one switch

One Fan point controlled by one switch

One 5 Amp Socket on independent board

All as per item No. 84 above but for 15/16 Amps switch socket out let point by using 2.5 Sqmm FRLSH grade, PVC insulated, stranded copper, conductor and 2.5 Sqmm FRLSH grade PVC insulated, stranded copper conductor as earth continuity conductor.

M&L Point wiring using FRLSH grade PVC insulated, unsheathed, stranded copper conductor of size 1.5 Sqmm and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed stranded copper conductor as earth continuity wire to be drawn in and including non metallic rigid PVC conduit concealed in wall including cutting and chassing the wall as per site requirement and making good disturbed surface of walls complete all as specified for :-

one light/fan point controlled by one switch

one 5 Amps switch socket combination on independent board

All as per item No. 84 above but for 15/16 Amps switch socket out let point by using 2.5 Sqmm FRLSH grade, PVC insulated, stranded copper, conductor and 2.5 Sqmm FRLSH grade PVC insulated, stranded copper conductor as earth continuity conductor.

S&F Modular switch one way 6 Amp, 1 module

S&F Socket, 6A - 2/3 pin combined 2 module

S&F Modular switch one way 16 Amp, 1 module

S&F Socket, 16A - 2/3 pin combined 2 module

S&F ceiling rose, polycarbonate three terminals.

S&F modular fan regulator, stepped type 120/280V

S&F white cover plate with frame double module

S&F white cover plate with frame three module

S&F white cover plate with frame four module

S&F white cover plate with frame six module

S&F modular white cover plate with frame eight module

S&F modular metal flush box 1/2 module

S&F modular metal flush box 3 module

S&F modular metal flush box 4 module

S & F modular metal flush box 6/8 module

Taking down Sub main /Sub circuit wiring of any type and size including conduit / casing capping / batten wiring complete all as directed by Engineer-in-Charge.

M&L Submain wiring using two runs of FRLSH grade PVC insulated unsheathed, stranded, copper conductor cable of size 4 Sqmm and one run of 4 Sq mm FRLSH grade PVC insulated, unsheathed, stranded copper wire concealed in wall and to be drawn in and including PVC conduit 20mm dia including cutting and chassing wall surface as per site requirement all as specified and directed

All as per item No. 104 above, but using 2 runs of 6 Sqmm and one run of 6 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, copper wire to be drawn in and including (ERW) stove enamelled conduit conduit (Note : Two runs of 6 Sqmm and one run of 6 Sqmm copper wire and steel conduit shall be measured as one unit.)

All as per item No. 104 above, but using 2 runs of 4 Sqmm and one run of 4 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, copper wire to be drawn in and including (ERW) stove enamelled conduit conduit (Note : Two runs of 4 Sqmm and one run of 4 Sqmm copper wire and steel conduit shall be measured as one unit.)

All as per item No. 104 above, but using 4 runs of 6 Sqmm and two run of 6 Sqmm FRLSH grade PVC insulated, unsheathed, stranded, copper wire to be drawn in and including ERW stove enamelled steel conduit 20 mm dia Note : 4 runs of 6 sqmm and two run of 6 Sqmm copper wire and steel conduit shall be measured as one unit.)

All as per item No. 104 here in before but using 2 runs of 2.5 Sqmm and one run of 2.5 Sqmm PVC insulated, unsheathed, stranded, copper wire to be drawn in and including PVC conduit of size 20mm dia.

S&F MCB DB made of sheet steel phosphatised powder coated with bus bar, neutral link, earth bar and din rail, double door type, TPN 4 way 440V, flush in wall including making good disturbed surfaces including taking down old unserviceable , complete all as directed by Engineer-in-Charge.

All as per Item No. 109 here in-before but SPN 12 way double door type, 240 volt

All as per in Item No.109 here-in-before but of SPN 4 way,240Volts double door

S&F MCB, SPN 6-32 Amps rating 240, volt, 'C' series, 10 kA, including taking out old

S&F MCB, TPN, 440V, 50Hz, 10kA, 'C' series, 6 to32 Amps including taking out old

S&F MCB, SP, 6 to 32 Amps, 240 volt, 'B' Series, 10 kA, including takind out old

Supply and fix LED tube light fitting 20 Watt, MS White Powder coated decorative LED T-8 Batten with PC tubeand MS Batten with decorative end cap complete with retrofit T 8 Polycarbonate including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No CRUS/1x20W or equivalent in Philips/CG/Havells

Supply and fix LED tube light fitting 2 x 20 Watt, white powder coated CRCA box type LED industrial Batten with PC tube retrofit T-8 with decorative end cap complete with retrofit T 8 Polycarbonate including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No CRUX/2x 20 W or equivalent Philips/CG/Havells

Supply and fix LED tube light fitting 2' x 2', 45 Watt, white powder coated CRCA full glow recess mounted LED Backlit Panel including connecting with suitable size of wire from ceiling rose to light connector all as specified and directed. Make - C & S, Cat Part No C/45W/2x2/W or equivalent Philips/CG/Havells

S&F LED street light fitting 70 Watt with all accessories, IP 66 attractively styled high pressure die cast housing having heat toughned glass cover housing epoxy powder coated in dark graphite grey colour complete with all accessories. Make - C&S, Cat Part No LTESS70WLED/LS Model INDUS/70W/LS) or equivalent in Havells/HPL/CG

Supply and fixing LED flood light 120 watts, protection class IP-66 high power with pressure die cast alluminium housing complte with SPD inbuilt for protection high voltage fluctuation including fixing with fixing arrangements such as grouting suitable size of bolts for fixing of fittings and tightened with nuts and washers in any position complete all as specified and directed. Make -C&S, Cat part No LTEF120WHPLED or equivalent in Havells/HPL/CG

M& L taking out old us sheet metal enclosure

S&F in repair Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP of 20 Amps as in repairs.

Taking down old ceiling/exhaust fan and Keeping in safe custody for re-use

S&F in repair 32 Amps industrial wall mounted plug socket 3P +N + E

M&L for fixing of ceiling fan obtained form iten sl No. 40 after cleaning and servicing of any make/model including replacement of unserviceable bush, bearing, capacitor and applying two coats of synthetic enamel paint complete all as specified and directed

M&L Earthing with galvanized steel earth plate electrode of size 600 mm x 600 mm x 6 mm buried directly in ground connected to GI wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15mm dia light grade GI tubing for protection of earth lead, MS sheet metal funnel with wire mesh, watering pipe light grade 20mm dia, charcoal or coke and common salt in alternative layers of 15 cm compacted thickness all around the electrode with concrete earth pit with PCC type C1 , 1:3:6 (using 20 mm graded stone aggregate), 50mm thick precast RCC type B1, (1:2:4)(using 20 mm graded stone aggregate) pit cover reinforced with 8mm dia deformed bar and suitable handle made of 10mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spoils to a distance not exc 50 mtr and necessary connection and testing complete all as shown in electrical plate No.3 of SSR Part-I, 2009 and all as directed .

Bansal And Co

RANA ENTERPRISES

Ajay Associates

DS ENTERPRISES

chauhan syndicate

M/S T.N.CONSTRUCTION

J B NATH AND SON