Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.5 LAccepted-AOC | 1 | Accepted-AOC being lowest | |
| 2 | 2₹3.1 L+₹62,368.85 (24.7%)Rejected-Finance | 2 | Rejected-Finance being not lowest | |
| 3 | 3₹3.8 L+₹1.3 L (52.5%)Rejected-Finance | 3 | Rejected-Finance being not lowest |
Tender Value
₹3.8 L
EMD Value
₹7,600
Closing Date
27 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I AF JAIPUR
AGE I AF JAIPUR OPP- JAL MAHAL AMER ROAD JAIPUR-302002
PROVISION OF CERTAIN MINOR WORKS AT AF STATION JAIPUR
2023_MES_625691_1
8440/E8
Open Tender
Civil Works - Others
Item Rate
180 days
AGE I AF JAIPUR
Class E and above and category a (i)
7 documents required · 7 mandatory
₹500
AGE I AF JAIPUR
₹7,600
19 Dec 2023
30 Oct 2023
2 Dec 2023
30 Oct 2023
27 Nov 2023
13 Nov 2023
Amount
Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in Hard/dense soil, complete all as specified.
M&L for PCC 1:3:6 type C-2, using 40 mm graded stone aggregate as in pillars, boundary pillars and fencing post or similar work complete all as specified and directed.
M&L for PCC 1:4:8 type D-2, using 40 mm graded stone aggregate as in pillars, boundary pillars and fencing post or similar work complete all as specified and directed.
S&F angle iron or any section of any size for balusters, nosing to steps, fencing post including cutting any size embeded in concrete, cutting/drilling of holes for fixing of barbed wire, fencing, welding etc confirming to Fe 290 Gde-E-165 complete all as specified and directed.
S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
S&F punched tape concertina coil of dia 600 mm (50 Nos rounds) (each coil to be stretched to 6 mtr length) secured and fixed in position having minimum tensile strength 1620 N/Sqmm of spacing steel core of wire size 2.60 mm make of concertina coil shall be as approved by GE/AGE (I) all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.
M&L for PCC 1:3:6 type C-2, using 40 mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.
M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.
M&L for chequered cement concrete tiles 30cmx30cmx25 mm thick with coloured cement and pigment, set, jointed and pointed in neat cement slurry in steps and risers over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
S&F for second class hard wood, transomes or mullions, straight for solid frames of any description, wrought, framed, rounded or chamfered (including weathering to trasome, if required put together with glue, pinned at joints, to making of riffle rack complete all as specified and directed.
S&F for 40 mm thick second class hard wood, boarding, fixed in any work, plain both side and edges tongued and groved or rebated fixed with nails or screws as in riffle rack complete all as specified and directed.
S&F for bands, straps, supports or stay for rainwater ventilating pipes, including bolts if requred hooks (stay) heavy for lage gates, hooks and pintle hinges large hasp and staples, chains, hand made sliding bolts, clamps, hold fastes, wall ties, hooks for hanging fans, plain angle cleat for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps plate washers and similar articles confirming to Fe-290 Gde-165 complete all as specified and directed.
M&L for 100 mm thick cement concrete, type B0 1:2:4 (12.5 mm graded stone aggregate) as in flooring, finish even and smooth with using extra cement complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces, nexc 10 cm width or girth when not connected with other painting surface or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed.
Supply & fix security safe of size 420 mm (height) x 460 mm (width) x 410 mm (depth) complete all as specified and directed. (Make Godrej Model - Rhino VI or Equiivalent model of Make Methodex/Wipro/Duraian)
S&F for rolled section as main and cross beam, hip and jak rafters, purlins where connected to common rafters and running, rails, vertical members and guides for sliding doors, fixed with angle cleats or other connecting plates etc confirming Fe-290, Gde E-165 complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.
Supply and fixing for 3.15 mm dia, expanded, welded, mild steel wire fabric of mesh, size 2.5 cm x 2.5 cm/3.00 cm x 3.00 cm, weight not less than 4 kg per Sqm, including cutting in any size, fixed to steel member such as angle/flat with welding complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws etc complete all as specified and directed.
M&L for Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
S&F 4.8mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Butt hinges, 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm long aluminum anodised handles cast type complete all as specified and as directed.
S&F 300 mm long aluminum anodized sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
M&L for PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.
M&L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work, rough finshed surfaces of concrete, vertical or to batter complete all as specified and directed.
M&L for holes in stone walls built in cement mortar exc half brick but not exc one brick for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required and including touch with three coat of white wash/colour wash complete all as specified and directed.
S&F for Framed work as grills, gratings etc ends of bars, shouldered and or riveted or forged in spikers, frame guard bars barred iron, doors, ladders, framed ballusters, walk ways, railling, frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 complete all as specified and directed.
M&L for preparation of steel surfaces and applying two coats of synthetic enamel paint exceeding 10 cm width or girth over a coat of red oxide primer complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring and making good cutting exceeding 20cm girth as in stone or concrete wall complete all as specified and directed.
M&L for point wiring with PVC insulated multi stranded cable with copper conductor of size 1.5 Sq mm single core 1100 volts grade ISI mark drawn through PVC casing capping including necessary accessories like bends, tees, elbow, etc fixed on wall/ceiling including gang box of suitable size with plastic laminated white coloured sheet top cover 3 mm thick including 1.5 Sq mm PVC insulated copper conductor earth continuity wire for socket 5 Amps complete all as specified and directed.
S&F switch socket outlet 3 pin 5 amp flush type complete all as specified and directed.
S&F Wall mounted fan 230 volts, 60W, single phase oscillating 400 mm sweep suitable for wall mounting complete all as directed and specified.
S&F Exhaust Fan, Steel body AC single Phase 230 V of size 300 m sweep with blades, frame and louvers complete all as directed and specified.
M&L for Cutting openings through walls for door, window and other openings Circular 300 mm hole in 380 mm wall) or enlarging existing openings or cutting out defective masonry for under pinning including providing, fixing and removing, shoring, cleaning and stacking stone and removing surplus to store and rubbish off the premises complete all as directed and specified.
Dk Enterprises
M.S. ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .