Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹26.0 L+₹8,128.35 (0.31%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹28.6 L+₹2.6 L (10.1%)Rejected-Finance | L3 | Rejected-Finance Not lowest bidder |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Oct 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER SAUGOR
Military Engineer services Garrison Engineer Saugor MP- 470001
COMPREHENSIVE MISC REPAIR /MAINT WORKS IN MD ACCN OF AGE B/R-II UNDER GE SAUGOR
2024_MES_672603_1
GE/SGR/TOK-27 OF 2024-25
Open Tender
Civil Works
Item Rate
270 days
Saugor
Class D category a (i) and as per tender documents
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER SAGAR
₹70,000
Yes
12 Dec 2024
6 Sept 2024
12 Oct 2024
6 Sept 2024
10 Oct 2024
23 Sept 2024
7 Sept 2024 - 14 Sept 2024
Amount
Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.
Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.
Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2 sqm each complete all as specified and directed.
Taking down shutter of any description not exceeding 1 sqm each complete all as specified and directed.
Taking down and refixing of shutter of any description Note : Refixing incl taking down easing and adjusting and also refxing builders hardware as reqd of any description exceeding 1.00 sqm but not exceeding 2 sqm each complete all as specified and directed.
S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.
S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed.
S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.
S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification complete all as specified and directed.
S&F factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Aluminium section thickness 1.50 mm }
S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Aluminium section thickness 1.50 mm }
S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with and including one shop coat of red oxide primer & M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed
S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with and including one shop coat of red oxide primer & M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed
M&L second class hardwood in scantlings , timber clean sawn framed and fixed and including dismantling old unframed timber scantlings 40 sq. cm & over in section, in any position, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.
S&F 35mm thick 2nd class HW factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.
S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats, with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.
Ditto all as per item no 18 as above but 30 mm thick as in windows, ventilators etc sre provided with stiles ans rails as specified in SSR part-I, Section 8 Clause 8.24 (b), with and including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer Complete all as specified and directed.
S&F 3mm thick, ordinary glass pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.
S&F for 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane.complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified..
S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.
S&F Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed.
S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed
S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc.
S&F 150 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm . complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed.
S&F in repair galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
S&F 3mm thick,ordinary glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and smooth without using extra cement, including taking down of existing cement or cement lime plaster complete all as specified and as directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement and including taking down of existing cement or cement lime plaster complete all as specified and as directed.
M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement and including taking down of existing cement or cement lime plaster complete all as specified and as directed.
M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6, including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed.
M & L for two coat of acrylic emulsion paint over a coat of 1mm thick Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
S & F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 32 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.45 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S & F coloured Non Asbestos designer ceiling cement boards 4 mm thick, including dismantling of old ceiling,Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed
M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts, including dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and refixing the same complete all as specified and directed..
S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts, including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed.
S&F in repair 25mm dia stainless steel curtain rod not less than 0.70mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge
S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 15 mm dia GI tubing and connections complete all as specified and directed
S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking down old 20mm dia GI tubing and connections complete all as specified and directed
Taking down or up steel/ Pvc tubing and connection including cleaning and refixing the same 15mm bore complete all as secified and directed
Taking down or up steel/ Pvc tubing and connection including cleaning and refixing the same 20mm bore complete all as secified and directed
Taking down or up steel/ Pvc tubing and connection including cleaning and refixing the same 25mm bore complete all as secified and directed
Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.
S&F in repair for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.
S&F in repair for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.
S&F in repair for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.
S&F in repair for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.
S&F in reapir for 75 /90 mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.
S&F in reapir for 110mm dia PVC(SWR)pipes bends with access door any radious complete all as specified and directed.
S&F in reapir for 75 / 90 mm dia PVC(SWR)pipes bends with access door any radious complete all as specified and directed.
S&F in reapir for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.
S&F in reapir for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.
M&L in repair for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all specified.
S&F for in repairs15mm,pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.
S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed complete all as specified and directed.
S&F for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair complete all as specified and directed.
S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs complete all as specified and directed.
S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.
S&F for in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F for in repairs Brass CP Wall mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F for in repairs Brass CP Sink mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F for in repairs Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket complete all as specified and directed.
S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.
S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.
S&F for peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed.
Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.
S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with and including 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms), including dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.
S&F Rotational moulded polyethylene water storage tanks capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, with and including 20mm Ball valves, high pressure of PTMT with high density plastic bass screwed for iron pipe and fixed (min wt 20mm - 210 gms), including dismantling of old unserviceable Water tank and removing from site complete all as specified and directed.
S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.
S&F for in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.
S&F in repair sinks with drainage board made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .
S&F for sinks made out of stainless steel 1 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.
Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required.
M&L for treatement for sunken portion is as follows :- (a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (b) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 200 ml per 50 Kg of cement and finishing the surface even and smooth without using extra cement. (c) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (d) M&L for PCC 1:7:12 type D2 using 40 mm graded stone aggregate as in filling (sunken portion) (e) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 200ml per 50 kg of cement, as sub base, 75mm thick on top. Note :- Above quoted rate includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontal flat area to be measured.
S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe complete all as specified and directed.
S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.
M&L for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed.
S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Note : Pillar tap and PVC connection will be measured paid separetly.
S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.
M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM (1:4), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screeed bed layer in CM (1:6), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for non skid joint free ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in dado / skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick plaster in CM (1:4), including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for glazed ceramic joint free coloured tiles on vetical surfaces size 600x300x7mm thick, over & including 15mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles, including dismantling of floor tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm as in floor set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 15 mm thick screed bed in CM 1:6 complete, including dismantling of floor, hearth tiling including cement mortar bedding and removing of rubbish off the premises complete all as specified and directed.
M&L for 16 mm to 18 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for vertical surface of pillars, floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over and including 20 mm thick screed bed or bedding layer of CM (1:3) including pointing in white/colour cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor complete and including dismantling of old Stone slabs /Kota stone/Tile of any description or thickness etc complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6, C2 (40mm graded aggregate) as in plinth Protection finishing cement concrete surface even & smooth without using extra cement complete incl forming construction joint 10mm x 20mm filled with bitumen and coarse sand mortar, including demolition of old cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed.
M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate ,in foundations, filling and mass concrete, including demolition of old cement concrete in any description and any position, thickness n exc 15cm complete all as specified and directed.
M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone aggregate as levelling course/mass concrete, including demolition of old cement concrete in any description and any position, thickness n exc 15cm complete all as specified and directed.
S&F for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.
S&F for Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality.
M&L reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc including demolition of old RCC slab of any thickness and in any position complete all as specified and directed.
M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed
Material and labour in repair providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treated with aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50 mm thick uniformly levelled surface of stone dust cushioning, , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement including dismantling of old unserviceable tile complete all as specified and directed.
M&L fir cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating, including demolition of old PCC complete all as specified and directed.
S&F for 18 mm thick marine plywood board interior grade with 1mm thick white mica lamilation one side and 1mm thick coloured mica on another side as in cupboard , shelve and shutter etc fixed with screws including Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.
S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.
S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.
S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised.complete all as specified .
S&F for Hasp and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified .
M&L for one coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc all as specified and directed.
M&L for one coat of white wash on old decorated surface of ceiling ncluding preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc all as specified and directed.
M&L for Two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc all as specified and directed.
M&L for one coat of paint on old decorated surface of walls with Acrylic emulsion incl preparation of surfaces i.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of distemper and painted surfaces complete all as specified and directed.
M&L for two coat of paint on old decorated surface of walls with Acrylic emulsion incl preparation of surfaces i.e removing of nails, making good holes /craks with cement mortor etc and washing floors, cleaning glass , joinery , electric fitting washing rubbing down and stopping of distemper and painted surfaces complete all as specified and directed.
M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick in two layers for levelling the surfaces of walls and applying two coat of acrylic emulsion over and including a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed.
M&L for one coat of synthetic enamelled paint on old painted wood/wood based surface of any desription over 10cm width or girth incl preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
M&L for one coat of synthetic enamelled paint on old painted steel based surface of any desription over 10cm width or girth including preparation surfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed
Taking down of old roof treatment of any description including demolition of mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc and applying new water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items with and including materials and labour as under:- (i) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded. (ii) M&L rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab. (iii) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iv) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (v) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (vi) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane. (vii) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed.
M & L for PCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etc on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement etc., including demolition of old PCC complete all as specified and directed
maharaja construction and suppliers (BID ID -3109911)
M K Construction (BID ID -3118079)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .