REPAIR TO SANITARY, PLUMBING, FLOORING, JOINERY, ROOF SHEET, ALUMINIUM JOINERY PERIODICALS USING MECHANICAL MEANS AND OTHER CAMPEARANSIV MAINTENANCE UNDER GE(AF) BAMRAULI

Amount

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.

S&F in repair aluminium alloy, anodised, sliding door bolt 300 mm long ISI Marked , with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F in repair aluminium anodised barrel tower bolts of ISI Marked extruded section, 200 mm long complete.

S&F in repair hasp and staple 100 mm size, safety type, aluminium anodised including bolt to hinge plate, fixed with screws complete.

S&F in repair extruded aluminium alloy handles ISI Marked, fabricated type, anodised, 150 mm size complete.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed with rubber beeding complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed with rubber beeding complete.

M&L for sheet glass ordinary quality 3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed. Make : Jaquar continental CAN-CHR-1173 Glass Shelf or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete. Make : Jaquar Kubix prime AKP-CHR-35771P or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified

Material and labour in repair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

Taking down existing aluminium windows exc. 1.50 Sqm and not exc. 2.0 Sqm and re-fixing the same after minor repairs etc. replacement of rubber beading and aluminium strips etc complete.

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

M&L for tuck welding in repair not exceeding 2.5cm in length of metal n exc 6mm thick complete.

M&L for running welding in repairs not exceeding 6mm thick of metal to be welded in existing items etc complete.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete.

S&F flush shutters 30 mm thick, solid core construction, with block board core and polished teak, ply wood face panels, commercial type on both sides complete.

S&F butt hinges, medium weight, cold rolled mild steel, 100mm size complete.

S&F aluminium alloy, anodised, sliding door bolt 250 mm long, ISI Markedwith hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete.

S&F Aluminium anodised barrel tower bolts of extruded section, 200 mm long complete.

S&F in repair Mild steel wardrobe hooks 450 - 600 mm length, complete.

S&F in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete.

S&F in repair brass mortice lock, vertical type, size 100 mm, 4 levers complete.

S&F 150mm size in repair 7 lever super night latch single bolt, fixed in inside side of door shutter complete all as specified.

S&F 2lever wardrobe lock,verticle type of 50mm in size complete.

Supply and fixing factory made UPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. Note: For PVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

S & F in Repair of 18 mm thick Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S & F in Repair of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed.

S&F for powder coated anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F in repair for aluminium anodised window openable/fixed type/sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass fixed with rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt etc complete in all as specified and directed.

S&F in repair aluminium anodized grills with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed.

S&F in repair for aluminium anodized door (Partly paneled and partly glazed ) with 4.5 mm thick plain glass sheet and 12mm particle board interior grade both side laminated) and aluminium section weight not less than 0.55 kg/RM with self closing hydr4aulic door closer complete with all fitting complete all as specified and directed.

M&L for door with 12 mm thick plain / froasted toughned glass, rail, ,floor machine, handle with locking device with SS fixtures etc complete supplied and fixed at site including dismantling of existing doors

M&L for 12 mm thick plain / froasted toughned glass fixed type on opening and shelfs , partition including cutting and groving on wall with or without aluminium frame, rail, handle , lock with SS fixtures etc complete supplied and fixed at site including dismantling of existing doors

S&F Stainless steel concealed door closer/over head in floor mounted best quality suitable for door shutters complete all as specified.

S&F in repair 32 mm dia PVC flush pipe for low level flushing cistern to pedestal/squatting pan including all fittings complete.

S&F in repair bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore, fancy type (minimum weight 105 gms) complete.

S&F toilet paper holder (Make Jaquar Cat No:AKP 35753P or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair Angle cock / value cast copper alloy screwed down with high pressure with crutch or butterfly handle screwed with ends for iron pipe or uinon & fixed of 15 mm dia.

S&F in repair wash basin mixer 15mm bore all as specified.

S&F in repair Hand jet health faucet 15 mm bore with all connected fittings.

S&F in repair bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete.

S&F in repair Towel rail 600mm all as specified (Make Jaquar Cat No : AKP 35711P or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair Towel ring all as specified (Make Jaquaror Cat No : AKP 35721P or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair SOAP DISH holder all as specified (Make Jaquar Cat No: AKP 35731P or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair Towel rack with lower hanger 600mm all as specified.

S&F in repair SOAP dispenser with glass bottle holder all as specified (Make Jaquar Cat No:ACN-CHR-1135N or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair Tumbler holder all as specified (Make Jaquaror Cat No: ACN-CHR-1141N or equivalent from list of makes as approved by Enginer-in-Charge.

M&L for Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repairs three way wall mixer with provision of over head shower with L bends connecting legs & wall flanges incl nipples complete.

S&F in repair 32 mm brass chrome finish bottle trap for Wash hand basin complete all as specified.

M&L for repair only to wall mixer of any make by replacing L-bends,connecting legs& spindle and, nipples etc complete

S&F in repair 150mm Brass Chrome Finish Square Maze Overhead Shower, OHS-1605 with swivel joints, fixed in repairs complete.

S&F in repair jet spray with flexible pipe and holding screw other fittings etc complete.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.

S&F in repair Stainless steel plate rack of size 780x900x250mm fixed in repair complete.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes, etc complete.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes, etc complete.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.

S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete.

S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete.

Labour only opening of air lock in toilets/ bath and kitchen of GI pipe of any dia but excluding fittings complete.

Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

Supply and fixing 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store complete.

Supply and fixing 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.

Mild steel chromium plated grating 125 mm dia, fixed in repairs to Nahani traps complete.

S&F in repair Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete.

Supply and fixing (in Repair) vitreous china wash down water closet (pedestal pattern) white (excluding flushing cistern and flush pipe) and P or S trap including connection to drain (or outgoing pipe) and to flushing pipe anti-syphonage pipe etc complete all as specified and directed. including plastic water closetseat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

Supply and fixing(in Repair) Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified including plastic water closet seat closed pattern with flat bottom and cover and mild steel chromiunm plated or aluminum hinging device.

Supply and fixed in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx350mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in Particular specifications. Note : Vitreous china wash down water closet (Pedestal Pattern) cat Part No. CURATOR S1013132 S trap 250mm of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications as approved by Enginr-in-Charge.

Supply and fix in repair vitreous china wall hung wash hand basin with pedestal snow white miniumum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin cat Part No. CONCORD S2040112, Pedestal cat part No S2090107 & chromium plated brass centre hole basin mixer cat part No F2002461 of 'Cera' or equivalent model of make specified in Appendix 'B' to particular specifications as approved by Engineer-in-Charge.

S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed. Make : Jaguar Cat No. JPL-SSF-ST88158B or equivalent from list of makes as approved by Enginer-in-Charge.

S&F in repair PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe, complete.

Removing and refixing of bottle trap from WHB after cleaning and removing all blockages etc. Complete.

S& F in Repairs PVC Syphon kit suitable for One piece WC Cistern complete

Resecurring of syphon kit by minor adjustment and replaceemnt of syphon washer etc. Complete.

S&F in repair 32mm bore waste fittings of brass CP for glazed ware sinks,basin etc with long screwed shanks , and fly nut flange end bedded in red lead cement and other end fixed complete.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.

M & L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed.

M & L for complete removal of existing treatment and applying 1.5 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed.

M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1.5 mm thick putty ,using Mechanical means complete all as specified and directed.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.

M&L for Preparation of old treated wooden surface of any description over 10 cm width or girth and applying one coat of synthetic varnish using Mechanical means complete all as specified

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion with roller brush, white or tinted over & including alkali-resistant cement primer Using Mechanical means complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted including a coat of cement wash with white cement Using Mechanical means complete.

M&L for preparing old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion, white or tinted Using Mechanical means complete.

All as per item no 102 above but on ceiling complete all as specified and directed.

M&L for preparing old painted surfaces of wood and wood based materials of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.

M&L for preparing old painted steel & iron surfaces of any description over 10cm in width or girth and applying one coat of synthetic enamel paint Using Mechanical means complete.

Demolition of brickwork built in cement or cement lime mortar complete.

M&L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete.

Dismantling of stone slabs, and tiles of any description or thickness in floors aprons etc including cement mortar bedding (but not backing), removing un-serviceable tiles to store and rubbish off the premises

M&L for 25mm thick plain cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as levelling course all as specified and as directed.

M & L for non skid Heavy duty Endura tile 400x400x12mm thick coloured joint free in floors etc set and jointed in neat cement slurry and pointed in colored cement to match over and including 15mm thick screed in CM 1:4 complete all as specified and directed.

M&L for factry made machine pressed Chequered cement concrete tiles 20cmx20cmx25mm thick set and jointed in neat cement slurry laid over and including 15 mm thick screed in CM(1:6) and pointed in white or colour cement to match with grey cement and no pigment complete all as specified and directed.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises for minor repair to floor tiles/ nahani traps and repair to concealed stop cock and GI tubing in wall etc in patches. complete.

M&L for Non Skid ceramic tiles coloured 300mmx300mmx 8 to 10 mm thick (square/ rectagular) area of each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc complete.

M&L for Non Skid ceramic tiles coloured 8 to 10 mm thick(square/ rectagular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed layer in CM (1:6) for lying floor finish etc (1st quality/Premium Quality)

M&L for double charged Vitrified Ceramic coloured tiles of size of tiles exc .36 Sqm But Not Exc .42 Sqm in each tiles laid over and (square/ rectagular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tiles laid over and including 15mm thick screed bed layer in CM (1:6) complete all as specified and directed.

All as per Item No. 117 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade tile fixed over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450x 350x7 mm thick tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile fixed over and inclduing 10mm thick rendering in CM (1:4) complete etc complete all as specified.

M&L for filling white cement on floor/wall tiles joints including removing old fillings etc complete.

Demolition of concrete of any description and in any position complete.

Material and labour for PCC 1:2:4 using 20mm graded aggregate as in PCC benching at junction of tiles , parapets and filling hollow section of pressed steel of suitable size complete.

Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete.

S & F 110 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

S & F 75 mm dia PVC (SWR) rain water pipes, single socketed, fixed to walls with and including MS clamps complete.

Supply and fixing 110mm PVC (SWR) bends of any radius complete.

Supply and fixing 75mm PVC (SWR) bends of any radius complete.

Supply and fixing 110mm PVC (SWR) junction single T equal or unequal with acccessible door complete.

Supply and fixing 110mm PVC (SWR) vent cowl complete.

Supply and fixing 75mm PVC (SWR) vent cowl complete.

Supply and filling of rubber bead in all types of windows/ Ventilator in any gap/joint etc complete.

M & L for taking down cement plaster on brick work or concrete surfaces incl racking out joints, hacking for key scrubbing down with water etc and rendering 10 mm thick in ready mix cement plaster 1: 4 on fair faces of brick masonary or concrete surfaces of walls mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer instructions, finished even and fair complete all as specified and directed after applying one coat of smart care damp guard/block 2K of Make :- Asian paints / Dr. Fixit or equivalent as approved by GE.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.

Taking down alluminium door completely and refixing in the same opening after adjusting the floor spirng / adjusteing the screws for easy moving and making functional by changing rubber beading to glass/board all as specified and as directed

S&F in repair satinless steel plate rack of size 600x750x250mm weight not less than 7 kg each and all a directed complete all as specified.

S&F Double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, covering pivot made of brass, other made of mild steel heavy futy and fixed

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

All as per item no 138 above but plain sheet as in walls,ridfges etc complete all as specified and directed.

S&F Precast cement cement concrete louvers and jallies type BO 1:2:4 (12.5 mm Graded aggregate),25 mm thick (measured solid),including all mould-ings but excluding frames set in cement mortor 1:6 (precast frame shall be measureed separately all as specified and directed

M&L for steel work in tubular trusses including special shaped washers etc . Complete using ERW or induction butt welded tubes conforming toIS 1161 -1979 grade St 240

S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified

S&F of 150mm wide for frames for fishing of shutters with 36mm thick (18mm thick back to back sticked) Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws, solvent cement/adhesive to make wall mounted kitchedn cabinet back and pull out drawer sides including taking down of old unserviceable board complete as per specification and ad directed complete all as specified. Notes : Fabrication and installation work to be carried out by authorized fabricator only)

Supply only stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) thali basket (11-13 division) of minimum size 50cm x 37cm x 20cm made of 4mm minimum dia S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cm x 16cm made of 4mm minimum dia S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) partition basket of minimum size 50cm x 37cm x 16cm made of 4mm minimum thick S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) Cutlery basket of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S Wire and bottom of S S Perforated sheet approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) Cutlery basket (Plain) of minimum size 50cm x 37cm x 16cm made of 4mm minimum dia S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) bottle pullout of minimum size 50cm x 37cm x 16cm in two tier made of 4mm minimum dia S.S Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

Supply only stainless steel (Grade S-304) ball bearing telescope channel 20" length (full extension mechanism) complete all as specified and directed.

Supply only Autocut Hydrolic (soft closing) stainless steel hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

Supply only 75 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

Supply only 150 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

R K CONSTRUCTION COMPANY

M/S KESRI WORKERS

M/S R S Traders

M/S SWASTIK BUILDERS

M/S SATISH KUMAR

chauhan construction

ASHWANI BUILDERS & SUPPLIERS

Mohit Enterprises