Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC BUDOOBAGH NOWPORA 0 KHANYAR SRINAGAR JAMMU KASHMIR 190003 | SRINAGAR | JAMMU AND KASHMIR | 190003 | ₹6.3 L | L1 | Accepted-AOC Being L1 |
| 2 | L2₹8.1 L+₹1.7 L (27.5%)Rejected-Finance SANAT NAGAR SRINAGAR PIN 190005 J K | SRINAGAR | JAMMU AND KASHMIR | 190005 | ₹8.1 L+₹1.7 L (27.5%) | L2 | Rejected-Finance OTHER THAN L1 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not recommended since documents furnished by the firm are incomplete as per Para 1.5 of Manual on Contracts. DD and EMD in term of Clause 7b of NIT has neither been uploaded nor received. |
| 4 | Rejected-Technical | - | - | Rejected-Technical Not recommended since documents furnished by the firm are incomplete as per Para 1.5 of Manual on Contracts. DD and EMD in term of Clause 7b of NIT has neither been uploaded nor received. |
| 5 | Rejected-Technical | - | - | Rejected-Technical Not recommended, since documents furnished by the firm are incomplete as per Para 1.5 of Manual on Contracts. DD and EMD in term of Clause 7b of NIT has neither been uploaded nor received. |
| Sl No | Description | Qty | Unit | Top Mind Industries Pvt Limited L1 | M/S BHAT ENGINEERING WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Supply, installation, testing and commissioning of duct able type standalone oil fired kerosene/ HSD based heating system complete with stainless steel heat exchanger chamber consisting of furnace fabricated out of high temperature resistance stainless steel, automatic burner assembly control panel with sequence controller, photocell, for flame failure. HT Transformer electrode fan assembly with motor temperature controller stainless steel reflector, built in fuel oil piping exhaust chimney all housed in powder coated casing suitable for operation on 50 Hz single phase 230 volt AC Supply capacity 50,000 KCal/ hr with fallowing:-
(a) Heat Output - 50000 KCal/Hr.
(b) Hot Air Temp - 40 C
(c) Temperature Rise - 90 C Max
(d) Fuel Consumption - 1.75 Ltr/Hr
(e) Thermal Efficiency - 80-90%
(f) Electrical Supply - 220 Volts 50 Hz
(g) Temperature Control - Automatic
(h) Fuel - Kerosene/ Diesel
(j) Burner - Riello/ Ben-tone
Make:- ECCO Flame/Flameco/Thermax | 2 | Each Job | 3,10,000 ₹6,20,000 Lowest | 3,95,000 ₹7,90,000 |
| 2.00 | Supply, fixing and testing of ducting for hot air blower of size 200mmx200mm made out of MS sheet of size 22 SGW and supported with Angle Iron of size 25x25x4mm with fixing arrangements and duly insulated with insulation material 6mm thick and aluminium cladding as required at site complete all as specified and or/ as directed by Engr-in-Charge | 12 | Sqm | 600 ₹7,200 Lowest | 650 ₹7,800 |
| 3.00 | Material & labour for Point wiring for power point 3 pin switch socket 15 Amp with PVC copper conductor FRLS cable multistranded unsheathed 2.5 Sqmm on independent board including one run of 2.5 Sqmm multistranded PVC copper conductor FRLS cable for earth continuity in and including PVC casing and capping fixed on wall complete all as specified and/ or as directed by Engr-in-Charge. | 2 | Point | 150 ₹300 Lowest | 300 ₹600 |
| 4.00 | Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5/15 Amp, flush type complete all as specified and/or as directed by Engr-In-Charge | 2 | Each | 50 ₹100 Lowest | 110 ₹220 |
| 5.00 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the earth plate not less than 1.5 metre deep below normal ground level, connected with and including galvanised iron strip of size 32 x 6 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in any type of soil all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified | 1 | Each | 5,000 ₹5,000 Lowest | 7,200 ₹7,200 |
| 6.00 | Material & labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for making padestal etc for installation of stand alone CHS etc. complete all as specified and/ or as directed by Engr-in-Charge. | 0.9 | Cum | 100 ₹90 Lowest | 690 ₹621 |
Tender Value
₹7.3 L
EMD Value
₹14,600
Closing Date
15 Jun 2026, 6:00 pmClosed
CWE, HQ 138 WE
CWE, HQ 138 WE
PROVN OF 02 x STANDALONE CENTRAL HEATING SYSTEM AT SATA REGT UNDER GE 865 EWS
2026_MES_767630_1
138WE/L-17/2026-27
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE 865 EWS
As per tender documents
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹14,600
Yes
13 Jul 2026
25 May 2026
22 Jun 2026
25 May 2026
15 Jun 2026
8 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply, installation, testing and commissioning of duct able type standalone oil fired kerosene/ HSD based heating system complete with stainless steel heat exchanger chamber consisting of furnace fabricated out of high temperature resistance stainless steel, automatic burner assembly control panel with sequence controller, photocell, for flame failure. HT Transformer electrode fan assembly with motor temperature controller stainless steel reflector, built in fuel oil piping exhaust chimney all housed in powder coated casing suitable for operation on 50 Hz single phase 230 volt AC Supply capacity 50,000 KCal/ hr with fallowing:-
(a) Heat Output - 50000 KCal/Hr.
(b) Hot Air Temp - 40 C
(c) Temperature Rise - 90 C Max
(d) Fuel Consumption - 1.75 Ltr/Hr
(e) Thermal Efficiency - 80-90%
(f) Electrical Supply - 220 Volts 50 Hz
(g) Temperature Control - Automatic
(h) Fuel - Kerosene/ Diesel
(j) Burner - Riello/ Ben-tone
Make:- ECCO Flame/Flameco/Thermax | 2 | Each Job | - | - |
| 2 | Supply, fixing and testing of ducting for hot air blower of size 200mmx200mm made out of MS sheet of size 22 SGW and supported with Angle Iron of size 25x25x4mm with fixing arrangements and duly insulated with insulation material 633 thick and aluminium cladding as required at site complete all as specified and or/ as directed by Engr-in-Charge | 12 | Sqm | - | - |
| 3 | Material & labour for Point wiring for power point 3 pin switch socket 15 Amp with PVC copper conductor FRLS cable multistranded unsheathed 2.5 Sqmm on independent board including one run of 2.5 Sqmm multistranded PVC copper conductor FRLS cable for earth continuity in and including PVC casing and capping fixed on wall complete all as specified and/ or as directed by Engr-in-Charge. | 2 | Point | - | - |
| 4 | Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5/15 Amp, flush type complete all as specified and/or as directed by Engr-In-Charge | 2 | Each | - | - |
| 5 | Material and labour for earthing complete with galvanised steel earth plate electrode 600 X 600 X 6mm thick buried directly in ground vertically to a depth not less than 2.25 metre deep below ground level with top edge of the earth plate not less than 1.5 metre deep below normal ground level, connected with and including galvanised iron strip of size 32 x 6 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 40mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe, including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350 x 350 x 50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size for lifting of cover slab, charcoal and salt in alternate layers including necessary excavation and earth work in any type of soil all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified | 1 | Each | - | - |
| 6 | Material & labour for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) for making padestal etc for installation of stand alone CHS etc. complete all as specified and/ or as directed by Engr-in-Charge. | 0.9 | Cum | - | - |
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
TenderL17202627.pdf
Tender Documents • 1.03 MB
BOQ_859675.xls
BOQ • 0.41 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .