CERTAIN B/R AND E/M WORKS SUCH AS FLOORING, PLASTERING, SANITARY FITTINGS, JOINERY AND INTERNAL ELECTRIFICATION IN AREA OF SINGLE LIVING ACCN OF JCOs AND ORs OF TSR, FOG, FDT, RLSO, S OF A AND NEW ADM BLOCK IN AOR AGE B/R (C) UNDER GE DEOLALI.

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Virified Ceramic tiles (Light Shade) 8mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

Ditto all as item No.2 but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Double charged Vitrified tiles 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Ditto all as item No. 4 but in skirting over 8 to 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L joint free non - skid Ceramic tiles 7 to 8 mm thick (Coloured) (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and directed.

M&L for joint free coloured glazed ceramic tiles in vertical surface of size 450 X 300 X 7mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified.

M&L for Glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick (coloured) of superior quality with highligter tiles fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

Demolition of stone slabs, paving stones and tiles of any description and thickness in floors, aprons, laid, bedded and pointed in any mortar complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including rubbing and polishing complete all as specified.

M & L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing mirror finish complete incl screed bed 15mm thick in CM 1:6 complete all as specified and directed.

All as per above but in riser of steps, skirting, dado and pillar laid over cement and including 10mm thick CM 1:4 backing coat complete all as specified and directed.

M&L for Mirror polishing on marble/ Kota stone/ stone work where ever required to give high mirror finish complete all as specified and as directed.

M & L for 15-18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm but not exc 2 Sqm each complete all as specified and directed

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/Navaratan.

Ditto but of Frame size 65x 125 mm double rebate

S & F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members complete all as specified and directed.

S & F 2nd class HW shutters 35mm thick, plain framed paneled shutter factory made (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed.

S&F 30mm thick flush door shutters solid core construction with block board core and plywood face panels commercial type on both sides etc complete all as specified and directed.

S&F 18mm Thick Plywood, grade BWR, type BB, No. of ply 13, fixed with screws complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge. Make:- Caliber/GreenPly/Century or Equivalent

S&F 12mm Thick Plywood, grade BWR, type BB, No. of ply 13, fixed with screws complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge. Make:- Caliber/GreenPly/Century or Equivalent

S& F 1mm thick sunmica coloured/design/texure of decorative laminated layer that is placed on top of wood/ply boards with adhessives as per manufactured instructions and directed by Engr-in-Charge.

S&F 28-30 mm thick prelaminated moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side palin with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated Flush WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded side with wood grain texture with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F 28-30 mm thick Prelaminated WPC factory made 100% Sketon/Glased door (conforming as per IS-4020) made from 100% lead free single extruded on both side with wood grain texture and including Extruded board CNC machine cut jali shutter inserted in between sketon and with density not less than 650 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire etardant and having screw holding capacity complete all as specified

S&F stainless steel wire cloth 304 Grade 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed.

S&F 100 mm long Butt hinges, Stainless Steel, with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F 150 mm long Extruded Stainless Steel handles designer type, fabricated type polished complete all as specified and as directed.

S&F 150mm size Stainless Steel barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S & F in repair Door closer hydraulically regulated, aluminum( die cast)body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

M&L for 250mm long Stainless Steel, sliding door bolt withsand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and as directed.

M&L for preparation of old painted wood or wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of newly wood or wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

Taking down Shutters of any description not exc 1 Sqm each complete all as specified and directed

S & F powder coated sliding window, three track shutters with sash bars,locking rails,locking arrangements including necessary joinery cleats,glazing clips, rubber packing,chowkhats aluminium snap beading, screws,suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire cloth 0.36 nominal dia of wire and average width of aperature 1.40mm, size of side rails, top rails,bottom rails 30x10mn and size of three track chowkhat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-1 clause 10.37 complete all as specified by Engr-In- Charge. Note : (i) the quoted rate shall be inclusive of cost of Glass panes/wire cloth will not be measured not paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India

S&F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S & F in repair 4.00 mm thick sheet glass fixed in window shutters including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for and fixed in any position etc complete all as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

M&L for preparation of New untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F coloured powder coated (50 micron) aluminium sections any type for doors,windows, ventilators frames including joining cleat for fixing etc. complete all as specified and directed.

S&F coloured powder coated (50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,Plain/Black Tinted/Frosted Glass, anodised aluminum snap beading screws etc. complete all as specified.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side laminate consisting of panel of PVC profile of 18mm (+ 0.7mm) thick of denisity 600 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of PVC lining of plain/prelim coloured PVC sheet using etc complete as per manufacture specification.Make : ECHON/Sintex/Rajshree/Navratan

S&F soft closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for WPC board cabinets, cupboard shutters complete all as specified.

S&F in repair 25 mm stainless steel 304 Grade curtain rod 1 to 1.50mm thick with designer funnel complete all as specified and directed by Engr-in-charge.

S&F SS heavy duty decorative brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed. Note: Curtain rod shall be measured and paid separately

S&F in repairs glazed earthen ware viterous china wash down water closet(pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated EWC Size: 340x515x405 mm, S Trap/ P Trap With PP Soft Close Slim Seat Cover, Hinges, Fixing Accessories And Accessories etc complete all as directed. Make: Cart No. AIS-WHT-101551SSPPSM or AIS-WHT-101551PSPPSM of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S&F in repairs viterous china wash down water closet squatting pan (Squatt pattern) of pattern "long pan:,Size: 450x535x180mm white,Asian Pan with L Bend and Extension, with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including pors trap etc complete al as specified adn directed. Make: Cart No. ECS-WHT-455LE of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S&F in repairs viterous china wash down water closet squatting pan (Squatt pattern) of pattern "long pan:,Size: 450x535x180mm white,Asian Pan with L Bend and Extension, with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including pors trap etc complete al as specified adn directed.

S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 555x410x205mm mm Wall Hung Basin with Fixing Accessories, and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings ,32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. Make: Cart No. ECS-WHT-801 of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S&F in repair 15mm dia brass chromium plated Fancy Pillar taps,with Swan Neck Tap with Left Hand Operating Knob capstan heads,screwd down high pressure, with or without lettered Hot or Cold with long screwed shanks anf fly-nutd,screwed for GI pipe and fixed complete all as specified and directed. Make: Cat part No. STE-107123 of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S&F in repairs Vitreous China urinals of Size: 330x315x420 mm, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including fixing Brass chromium plated bottle traps 32mm bore for urinal with inlet and outlet screwed for pipe or connections including necessary packing, union fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. etc complete all as specified and directed. Make cat part No ECS-WHT-253 of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S&F in repair Maze Overhead Shower 125 mm Square Shape Single Flow (ABS Body Chrome Plated) with Rubit Cleaning System including Shower Arm 240 mm Long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange, fixing to steel pipe or union complete all as specified . Make: Cart No. EOS-442 and ALE-536A of ESSCO by Jaquar group or Equivalent in Jaquar,Roca.

S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make ESSCO by Jaquar group Cat Part No:STE-107281, Hand shower SAE-1931SH555, flexible tube SAE-547D8 of ESSCO or equivalent.

S & F in repair for Free Standing Bathtub of size 1712 X 760 X 440 mm with Provision for both Over Flow & Drain Complete with Long drain Pipe, Connecting front & side panel complete all as specified and as directed by Engr-in-Charge Make: Jaquar Cat Part No: Alaska JBT-WHT-FSBT177542X or equivalent in kohlar and Roca.

S & F in repair for Maze Hand Shower 95mm Round Shape Single Flow (Face Plate Stainless Steel & ABS Body) with Rubit Cleaning System including Flexible Tube 8mm dia. & 1.5M Long with Sliding Rail 19mm dia & 600mm Long Round Shape with Hand Shower Holder complete all as specified and as directed by Engr-in-Charge Make: Jaquar Cat Part No: HSH-CHR-1653 & SHA-CHR-549D8 & SHA-CHR-1197N or equivalent in kohlar and Roca.

S & F in repair for Single Lever Wall Mixer with Provision of Hand Shower but without Hand Shower complete all as specified and as directed by Engr-in-Charge Make: Jaquar Cat Part No: OPP-CHR-15119 PM or equivalent in kohlar and Roca.

S&F in repair Stainless Steel chromium plated Towel Rail 600mm Long,complete all as specified and as directed by Engr-in-Charge. Make: Cart No. AEC-1111N of ESSCO by Jaquar group or Equivalent

S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make: Cart No. ORB-105107 of ESSCO by Jaquar group or Equivalent

S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make: Cart No.ORB-105053 of ESSCO by Jaquar group or Equivalent

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repair Health Faucet Kit (Flexible Hose,Handset, ABS Body & Bracket) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge. Make: Cart No. ALE-CHR-593 of ESSCO by Jaquar group or Equivalent

S&F in repair 15mm dia brass chromium plated two way bib cock with long wall flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make: Cart No. COS-103041 of ESSCO by Jaquar group or Equivalent in Jaquar or ROCA.

S & F in repairs Smart Single Flush Wall Hung Cistern with 39mm Drainage L-bend Pipe with Gasket & Installation Kit PVC valve less, syphonic action type, flushing cistern 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle, including brackets etc complete all as directed. Make: Cart No. ESH-WHT-184NL of ESSCO by Jaquar group or Equivalent in Jaquar or ROCA.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm etc complete all as directed.MAKE : NIRALI/IDIAMOND

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastesincluding bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as directed MAKE : NIRALI/IDIAMOND

Dismantling of water tanks including disconnecting all connections etc. complete for capacity of tanks .(a) Exc 250ltrs but not exc 500 ltrs

Dismantling of water tanks including disconnecting all connections etc. complete for capacity of tanks .(a)) Exc 500 ltrs but not exc 1000 ltrst

S&F rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 15mm bore complete for following capacity of tanks.

S&F in repair rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/ vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 25mm bore complete for following capacity of tanks

Taking up or down steel tubing and connections 15 mm Bore including cleaning for refixing or removal to store and S & F GI tubing 15 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

Taking up or down steel tubing and connections 20 mm Bore including cleaning for refixing or removal to store S & F GI tubing 20 mm bore Tubes, 'medium grade',' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as specified & as directed .

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F LDPE pipe 40mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed:- (a) Demolition of Cement concrete/brick bats filled on sunken slab upto mother slab including removing and Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Brushing cement slurry with 1.2 kg of cement per square metre duly blended with & including water proofing compound. (c) 15 mm thick (Average thickness) plaster in cement mortar (1:4) mixed with water proofing compound on sunken surface including walls. The corner of sunken portion shall be rounded in concave shape and adequate slope shall be made during plastering to accommodate sump pipe and curing the sunken portion with water minimum for 48 Hrs by ponding. (d) Applying self adhesive type APP based polymeric membrane minimum weighing not less than 3.6 kg/ Sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gm/Sqm) (e) M&L for PCC 1:7:12 type F2 using brick course agreegates for filling of sunken portion after conceling all menbrane upto FFL and sealing all joints to the entire satisfaction of Engineer-in-Charge. (Note:- Floor area shall be considered for measurement & payment purpose)

Taking down carefully existing unserviceable bitumen felt(any number of layers) including plaster of any thickness,wire brushing and cleaning of the surface of roof terraces including flashing and junctions of parapets kerb wall,PCC fillets,benching etc and removing of the rubbish to a distance not exceeding 500 M from the building and depositing where complete all as specified and directed.

M &L for providing 25 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed .

M&L for rendering 10mm thick CM (1:4) on roof slab top, mixed with water proofing compound finished even and smooth without using extra cement complete all as specified. Note: Water Proofing compound shall be measured and paid separately.

M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Applying one coat of bituminous primer @ 0.25 Kg/Sqm ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions iii) Apply two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .

Supply only water proofing compund as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but exc cluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for Brickwork with fly ash Old size bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6 etc complete all as directed.

M & L for except brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius with old size bricks in CM 1:6 complete all as specified and directed.

M&L for Autoclaved aerated concrete (AAC blocks)for masonry fixed with Ready Mix Jointing Mortar complete all as specied and as directed Makes/brands of Ready Mix Jointing Mortar shall be “Speed Dry Mix”/ “DUBOND”/ “MAGIC BOND”/ BUILDWELL”. Makes/manufacturers of AAC blocks :AEROCON/Ecolite/ ISI marked Grade I as approved by GE

M & L for 75 mm thick Cement concrete type C-2, 1:3:6 using (40 mm graded stone aggregate ) as in Plinth protection.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc.

M&L for Rendering in 10 mm thick plastering 1:6 on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement) complete all as specifed and directed.

M&L for Rendering in 15 mm thick plastering 1:6 on brick work or concrete surfaces of any description in wall/ceiling etc finished surfaces even and smooth (without using extra lime or cement) complete all as specifed and directed.

M&L for 5mm thick ceiling plaster on concrete surfaces in CM 1:3 finished even and smooth with a thin layer of sagol complete all as specifed and directed.

M & L for provide 15mm thickplaster with ready mix plaster on AAC block/Brick Masonry (Makes/brand- ACC’s “ACCOPLAST”/ CK Birla’s “AEROCEN” / Magic Plast /Speed Dry Mix’s “ ECO PLASTER”complete all as specified and directed

M&L for complete removal of existing treatment from wall upto plaster surface by electric sand paper grinder, washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot moulds, moss, efflorescent salts, trading all, greasy spots etc and preparation of surface complete all as directed.

M&L for applying one coat of alkali resistant primer etc complete all as directed.

M&L for applying One coats of oil emulsion distemper on wall etc complete all as directed.

M&L for applying two coats of oil emulsion distemper on wall etc complete all as directed.

M&L for applying one coats of oil emulsion distemper on ceiling etc complete all as directed.

M&L for One Coat exterior weather coat (Apex paint or Eqivalent) over one coat of exterior primer, including properly making of V shape crakes and filling of all cracks with crakes seal inc. preparation of surface of old decorated wall etc complete all as directed. Make Asian Apex Ulltima or equivalent.

M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces all as specified and directed by Engr-incharge

M&L for applying 2mm thick wall care putty External/Internal on wall all as specified and directed.

M&L for preparation Old surfaces plastered or unplastered and applying two coat of white washing on wall all as specified and directed.

M&L for preparation Old surfaces plastered or unplastered and applying one coat of white washing on ceiling all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position from unframed work as in roof members complete all as specified and directed

Dismantling of Battens for tiles spaced exc 15cm, shingles etc, of any size including tilting fillets complete all as specified and directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel pattern sheet 0.47mm to 0.50mm thick of an colour having tensile strength of 550Mpa and AZ-150 as in roof covering in hexagonal/rectangular/pentagonal shape cladding to wall fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.47mm to 0.50mm thick of any colour having tensile strength of 550Mpa and AZ-150 as in roof covering including ridges /cladding to wall,fixed with self tapping screws as specified and directed.

M&L in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240.

Dismantling of fencing wire mesh of any type complete all as specified and directed.

Dismantling of posts or struts(wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good disturbed ground all as specified and directed.

S&F 10mm dia MS Round bars as in support of Chain Link Fencing all as specified.

Supply only chain link MS galvanized fencing of any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire

S & F mild steel bolt screwed one end with hexagonal or square nuts & washers the other end enlarged not exc 15cm long dia of neck 12mm complete all as specified and directed.

M&L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M & L for Providing high prestress precast ce- ment concrete Type M-25 in columns, posts, boundary pillars, with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:6 complete with joints to match as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) MAKE :Universal or any Equivalent

S&F for 50 mm thick prestress precast cement concrete M-25 using compound wall (both Side smmoth Finish), planks/panels locking each other louvres and jallies as per approved design/patterns Set in cement mortar1:4 , (measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of high tensile carbonized steel wire dia 3 to 4mm reinforcement , Form work) (Note:columns/ poles will be measured seperately) MAKE :Universal or any Equivalent

M & L for 1:2:4, type B-1, (using 20mm graded stone aggregates) as in precast fencing posts, stuts etc area exc 100 & not exc 250Sqcm including form work etc complete all as specified:- (Reinforcement including in quoted rates. No extra payment shall be made.)

S&F for 40 to 50 mm thick precast cement concrete compound wall , planks/panels locking each other louvres and jallies as per approved design/patterns.Set in cement mortar 1:4 ,(measured solid ), including all mouldings but excluding frame as directed by Engr in charge. (Note: The quoted rate shall be inclusive of cost of reinforcement , Form work) (Note:columns/ poles will be measured seperately)

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed

M&L PCC 1:4:8 type D2 using 40mm grade stone aggregate as in foundation & mass concrete etc complete all as specified and directed.

M&L PCC 1:2:4 type B0 using 12.5mm grade stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 80mm thickness grey cement and with pigment , M-35 grade including 50mm thick Sand filling to under interlocking tiles complete all as specified and directed.

S&L machine pressed precast concrete interlocking paver block rubber moulded, any shape and size confirming ti IS-15658-2006 of 60mm thickness grey cement and with pigment , M-35 grade including 30mm thick Sand filling to under interlocking tiles complete all as specified and directed.

M&L for removing existing paver blocks of any thickness and at any place and refixing the same at any other place with proper interlocking all as specified and directed by Engr-incharge .

M&L for providing high gloss paver block lacquer coating on existing surface all as specified and directed by Eng-incharge.

M & L for prepolished chequered cement concrete tiles 30cm x 30cm x 22mm thick Rubber moulded with grey cement and pigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors complete all as specified and directed.

Demolition wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets all as specified and directed.

M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent

M&L for providing & fixing in repair false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) fixed or laid/ inserted to timber/GI/Aluminium framework with screws in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main "T" at 600 mm c/c to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 2mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 2 mm dia GI wire shall be pre-painted with polyester paint and groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. Make: Everest/ Armsrong or equivelent

S&F 5 to 8 mm thick interlocking PVC hollow false ceiling fixed with self tapping screw over and including aluminium hollow SECTION 40MMX40MM and hanging wire of approved colour and design complete all as specified as per manufacturerer instruction and directed by Engr-in-Charge Make:- Placopan,Sintex/RAJSHREE

S&F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.

Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and directed.

Supply and fix for framed work as in doors or gates of angle or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. toFe 410-W (Gde- E- 250) quality- A all as specified and directed. Note : Distrubed surfaces of wall shall be made good to true surface.

Finishing terrace with a premium specifically formulated roof and external coating and SRI value 102 which reflects the damaging UV rays and reduces the normal temperature of the building with make Thermacool 0.3C or equivalent .Surface preparations -Thoroughly abrad the surface to remove the loose particles dust and laitance insulation using coqse work and water jetting and filling all cracks with cement putty

Taking down unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, socket outlets, ceiling roses, pendent brackets, holders etc.removing marerialso storeforeeping in safe custody or for taking credt and making good disturbed surfaces of walls, floor etc.complete all as directed.

Material and labour for point wiring with two runs of multi stranded stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLSH cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLSH multi stranded copper cable for earth wire complete all as specified and as directed for :-

One light point controlled by one switch.

One fan point controlled by one switch

One 3 pin socket outlet 5 Amps on the same board.

One 3 pin socket outlet. 5 Amps on the independent board

One bell point controlled by one switch

Ditto all as per item no 159 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 1.5 sqmm cable as earth continuity wire.

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLSH, PVC insulated unseathed cable in and including PVc rigid conduict of suitable size, duly conceled in valve, floor, ceiling, case cutting in any type of wall/ floor and provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanized and suitable for fixing modular type switches/ sockets/ regulators/ AC starters, etc fixed in recess of wall brass chromium plated screws and cap washer complete for the following:-

One light point/ exhaust fan point controlled by one switch

One fan point controlled by one switch

One 5 pin socket outlet 5 Amp on the same board

One 5 pin socket outlet 5 Amp on the independent board

One bell/ buzzer point controlled by one push button

All as per item No 166 above but one 15 A socket outlet independent with 2.5 mm PVC cable and 2.5 mm cable as earth continuity wire.

Supply and fix in repair switch piano flush type single pole one way 6 Amps 1 module complete all as specified.

Supply and fix in repair switch piano modular type single pole one way 16 Amps 1 module complete all as specified.

Supply and fix in repair Bell push button modular type 5 Amp, flush type complete all as specified.

Supply and fix in repair Bell modular type, Ding Dong electric AC 230 Volts single pole complete all as specified and as directed.

M & L in replacement switch socket moduar type combination 3 pin 6 Amps flush type (multi purpose) complete all as specified and as directed.

M&L Modular type socket, 3 pin, 6 Amps / 16 Amps combined, 2 module complete all as specified and as directed.

M&L Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

Supply and fix in repair switch piano type single pole one way 5 Amps complete all as specified.

Supply and fix in repair switch piano type single pole one way 15 Amps complete all as specified.

Supply and fix in repair Bell push button 5 Amp, flush type complete all as specified.

Supply and fix in repair Bell, electric AC 230 Volts single pole complete all as specified and as directed.

S&F socket outlet 3 pin 5 Amps flush type complete all as specified and directed.

S&F socket outlet 3 pin 5 and 15 Amps flush type universal complete all as specified and directed.

M & L in repair for ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F in repair lamp holder PVC/ Poly carbonate, angle/batten Bakelite complete all as specified and directed.

S&F stepped type electonic fan regulator flush type on th existing phenolic laminated sheet etc as specified and directed.

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of CRCA sheet with snap on installer sutable for double side connection LED tube in and including batted and tube etc comptete in all respect. Make- Havells Mode\- Fixtute REGALBATTENT 8UPTO1 x22WSSBSWH, Tube-CRYSTAL 1213T 8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj)

Supply and fix in repair new sheet metal enclosure for DB's SPN 240 V with 200 Amps rated busbars of size 4 ways double door complete all as specified and directed.

Supply and fix in repair new sheet metal enclosure for DB's SPN 240 V with 200 Amps rated busbars of size 8 ways double door complete all as specified and directed.

Supply and fix in repair new sheet metal enclosure for DB's SPN 240 V with 200 Amps rated busbars of size 12 ways double door complete all as specified and directed.

Supply and fix in repair MCB SP 6 to 32 Amps, 240 volts, 10 KA complete all as specified and as directed. Make : L&T BB10320B or equivalent in Legrand/ Siemens/ ABB

Supply and fix in repair MCB SPN 32 Amps, 240 volts 10 KA, complete all as specified and as directed. Make : L&T BB20320B or equivalent in Legrand /Siemens

S&F in repair of PVC casing/ caing of size 25/32 mm with all requisite accessories ie junction box, inner and outer corners, bends, Tees, collars, reducers, etc complete all as specified an directed.

S&F single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.

M & L in repair sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRLSH cable 1100 Volts grade including 6 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSH as continuous earth wire drawn through existing conduits/ PVC Casing caping and connecting to common earth terminals complete all as specified and directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length. (ii) If casing caping required at site same shall be measured and paid under respective items.

All as per item No - 212 above but with 2 runs of 4 Sqmm cable with one run of 4 Sqmm cable for earthing.

M&L for earthing complete galbanized steel earth plate electrode 60x60 cm x6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth leal wire 4 mm dia by means of bolts, nuts and washers of GI or steel all shown in electrical plate No 3 connected to earthing test point all as specified or indicated including testing on water pipe GI 20 mm protected pipe 15 mm after completion.

S&F in repair 25 Watt new generation energy saving and environmental friendly long life LED Building security light fittings, made up of pressure die cast aluminium housing, with high power LED as lighting source and lens emebedded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK 07 complete all as specified and directed. Make: Havells (Cat No: ENDURA PEARLSL25WLED757SASYTOPCMP) or equivalent in Philips/Bajaj/Wipro

M & L for bracket made out of GI tubing 32 mm dia,light grade 1.0 mtr long including fixing with MS clamps -2 Nos made out of 25 mm wide 4 mm thick flat iron with M.S. nuts, bolts/screw -4 Nos & flat washer 01 No. for each including preparation of steel surfaces and painting with two coats of synthetic enamel paint over one coat of red oxide to the M.S clamps & bracket etc complete all as specified and as directed.

S&F 34 watt Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling. Make- Havells, Model-PLUTONEO2X2PLR 34WLED840S or equivalnt in Wipro/ Bajaj/ Philips

MAHESH DADAJI BACHHAV (BID ID -3427220)

Horizon Construction (BID ID -3427878)