UGPL For Utilization of Treated Water Of STP Mamdot

Providing, Laying, Jointing, Excavation of Trenches with backfilling of Pipeline system complete (As Detailed in attached sheets)

Civil Works for Pump Room (As Detailed in attached sheets)

Civil Works for Sump Well (As Detailed in attached sheets)

Complete pumping system (As per detailed sheet attached)

Electric fittings for Pump House and Pumps (As per detailed sheet attached)

Crossing of Minor with HDD Machine

Digital Water Meter (Lump Sum)

Sign Boards

GRAND TOTAL =

FRICTION LOSS & OPERATIONAL HEAD CACULATION

Frictional loss calculation for farthest Riser ( Nakka)/Last Point from Pump No 1/Starting Point

TOTAL

Calculation of Operational Head

GL at Last Riser (Nakka)

Total Frictional Loss

Extra loss (Free Board)

Total Head at Starting Point ( Hyd Gradient Level)

Less GL at Starting Point

Total Suction Head required

Opearation Head at Starting Point (Pump 1)

Assuming 10% additional safety factor

Proposed Direct Connection Pumping with Pipeline

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. MAMDOT 2 MLD,FEROZEPUR

PIPELINE SYSTEM

Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards,

Earth work upto 1.5 m. Depth for All classes of soil except rocky

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

H.D.P.E 180 mm o/d pipe of 4 kg./cm2 PE-80

Providing, Laying, fixing & jointing of ISI Marked H.D.P.E. Pipes as per ISI - 4984- 1995 casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.

H.D.P.E 400 mm o/d pipe of 4 kg./cm2 PE-80

Supplying, fixing and jointing H.D.P.E pipe's specials complete as desired by Engineer-in-Charge.

For pipe lines laid outside habitation & in the open area/ field 2% Extra will be taken for the respective i/d of pipe.) 2% of 28.15(E)(F)

Supply & Installation of Alfa-Alfa valve (HDPE)

180 mm. Dia.

Providing & fixing single air valve ISI Marked as per IS-14845 including jointing all carriages complete.

C.I Double air valve (Size 50mm)(For 180 mm dia HDPE PIPE)

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B Class, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete.

Supply & Jointing of 50 mm. Dia. G.I. Pipe(3mts for each ARV )

Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer incharge). Class PN-1 as per ISI

400 mm sluice valve flanged

180mm i/d Sluice Valves flanged

Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Double Flanged pipes with screwed flanged as per IS:8329- 2000, Class-K9 and laying the same in trenches to correct alignment and gradients,jointed with nut bolts and rubber insertion joints fitted complete including all cartage. ( Road Crossing)

180mm i/d pipe lines laid complete

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra.

Class PN-1.0 as per ISI with gun metal flap

180 mm i/d Non-return valve

Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @80.00 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects.

Inside size 90x150 cm and 120 cm deep

Supplying, Laying , Testing and Commissioning of ISI marked Butterfly Valve PN 1.6, with gun metal seal duly ISI marked complete with rubber insertion, nuts. Bolts and washers, matching flanges of required thickness, etc complete as per specification for pipeline branches control

200 mm dia M.S C class heavy duty ISI239:358) including all special, flanges etc.

Grand Total

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. MAMDOT 2 MLD,FEROZEPUR

Pump House

CIVIL

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.

Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Earth filling under floors with surplus soil containing more than 40% taking outside the premises in 15 cm layers including ramming watering and consolidated lead upto 1000 m

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering).

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels.

Centering and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level.

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing

12.5 mm thick cement plaster 1:5

12.5 mm thick cement plaster 1:4

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish

Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm

Conglomerate floor 50mm thick cement concrete rete 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine sand filling using mechanical mixer for mixing of material

Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm sand filling using mechanical mixer for mixing of material

Floating coat of 1:5mm thick neat cement laid in one operation to the topping

Providing and fixing 110 mm dia . U.P.V.C Rain water pipe of 4 kgf./sqm as per IS:4985 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-in- charge

Providing and fixing 110 mm dia. U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge

UPVC 110 mm bend

Top Khurra 0.6mx0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50.00 thick cement concrete 1:8:16

Khurra on roof as per item No. 13.43 with C.I. Spouts 100 mm dia fixed in position.

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-35 grade machine made rubber moulded smooth finish with strong vibratory process or with vibrohydraulic compaction machine and of approved size and design / shape laid in ordinary Grey and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-in-Charge IS code : 15658(2006)

Providing and fixing M.S. angle iron 40x40x6mm chowkhat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect. (a)For single rebate.

Providing and fixing 14 gauge MS sheet garage doors with 40mm x 40mm x 6mm angle iron frame with diagonal braces 3.15mm gusset plates including locking arrangement with handles etc. complete in respects

Providing & fixing of Box type steel windows, made of various ERW section outer 60mm x 25mm, central mullion 60mm x 25mm, for shutter 50mm x 20mm having thickness of 1.25mm (18 gauge), shash bar MS Tee 25mm x 3mm where required joints mitered and electrically flashwelded, with iron fittings including necessary iron handles, hinged cleat, tower bolts, iron hold fast and pintle hinges complete (excluding glazing and wire gauge) and finished with ready mixed paint red lead non setting primer complete as per specification, Drawings and to the entire satisfaction of engineer-in-charge. (Note:- Glazing, wire gauge and grill will be paid as per respective items)

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg / sqm exceeding 0.4 sqm of area

Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5 mm width, fixed with machine screws, complete in all respects.

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade

TOTAL

TOTAL

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. MAMDOT 2 MLD,FEROZEPUR

Cost of Sump Well

CIVIL

Excavation in Soil (any type) using Hydraulic Excavator CK 90 with hydraulic excavator of 0.9 cum bucket capacity including cutting, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, including all lifts and combined lead upto 30m.

Stone (building or pitching) Sand, Earth, Fly Ash, Bajri, Shingle, Spalls, Brick bats, Brick ballast and Stone metal.

Extra for filling earth in 15 cm layers and compaction

Cement concrete 1:4:8 With stone aggregate 40mm gauge mixing by mechanical means using concrete mixer volumetric type

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Reinforced cement concrete M-30 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering).

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering) including attached pilasters, buttresses etc when

Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodates thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.

Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to givean even shade

TOTAL

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME : UNDERGROUND PIPELINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT S.T.P. MAMDOT 2 MLD, FEROZEPUR

Electrical cost for Pump room.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring fan point (Without fan box)

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control poin

PVC INSULATED FR COPPER CONDUCTOR CABLES: Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 2.5sq.mm (Un-sheathed)

Overall size 4sq.mm (Un-sheathed)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES: Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring urposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-

Heavy Gauge PVC Conduit Pipe 25 mm dia.(Flushed)

G.I. EARTHING: Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I. earth pipe (Cutting threads and 36 Nos. holes, 1cm dia. to make a mesh around the GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length (including boring & refilling).

Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8 Metre in length)

XLPE INSULATED ARMOURED CABLES (LOOSE):-Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS 7098 (Part- 1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:-

Overall size 95sq.mm (4Core) Armoured (Loose)

Overall size 16sq.mm (4Core) Armoured (Loose)

MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Single Pole 40amp. (10kA, Curve-C)

RCCB's:Supply and erection of RCCB (Residual Current Circuit Breaker) for Earth leakage protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61008-1 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs

RCCB Double Pole 16/25amp., Sensitivity 30mA

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

Supply and erection of sheet metal Double Door Distribution Boards IP 43 IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, colorcoded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

SP&N Double Door Distribution Board 8 way each

CABLE TRAY: Supply and erection of MS perforated cable tray (MS Sheet thickness 2mm) with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc., complete in all respect as desired by the Engineer-in-charge and as per PWD General Specifications:-

Cable Tray Size 150mm x 50mm x 50mm (2mm thick)

Supply and erection of Double Walled Corrugated (DWC) HDPE pipe to be laid 1/2mtr. below ground level including excavation placing the pipe in position and back filling ith excavated soil etc. of the required size:- Double Walled Corrugated HDPE Pipe 120/103.5mm (Outer/ Inner dia.)

LT PANEL

Design, supply, erection& commissioning of following distribution panels made of 2 mm thick CRCA steel sheets, Floor mounted, fully enclosed, compartmentalized, dust & vermin proof with hinged & lockable doors, & complete with earthing, painting as required and mounted with the following : ( for detail specs refer technical specifications).

SECTION –1 INCOMER

MCCB Four Pole 100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

METERING & CONTROLS

- ON/OFF phase indicating lamps with control fuses .

SECTION –2 BUSBARS

100 TPN, Al Bus Bars with heat shrinkable PVC Sleeves – 1 set.

Protection

Neutral failure

Surge Protection

High Voltage Protection

Time delay Protection

SECTION –3 OUTGOINGS

- 16/25 A, four pole RCCB 30 ma Sentivity – 4N.o.+2SPARE

- 32 A, DP, 25 Ka MCB – 2 N.o.+2SPARE

Supply and installation of Hevay Duty Exhaust fan 450 mm with 1400 rpm. Approved MakeCrompton, Havells, Bajaj or equivalent.

Supply and installation of Led Tube light 20-22 watt with make of Phillips, Bajaj and Wipro. Item to include all amterial and lobour complete as per Specification and entire satisfaction of Engineer In Charge.

Supply and Installation of ceiling fan 1200 mm with double ball bearings. Approved make cropmton, havells, bajaj or equivalent

DEPARTMENT OF SOIL AND WATER CONSERVATION, PUNJAB

PROJECT NAME: UNDERGROUND PIPE LINE PROJECT FOR UTILIZATION OF TREATED WATER FOR IRRIGATION AT 2 MLD, STP MAMDOT, FEROZEPUR

COST OF PUMPING SYSTEM INSTALLATION

Providing, fitting & commesioning of ISI Mark Submersible Non-clog pumpset with Panel Board, Fuse Box, Cable for connection from Pump to Panel within the pump Room for 2MLD discharge and 23 Meter Head and power of 15 HP (as calculated in head loss sheet) (Non-Scheduled Item, cost considered as per market rate)(excluding the cost of Panel Board, Fuse Box, Cable )self propeller motor

Control panel with MS steel sheet fabricated, dust & vermin proof wall mounted, rubber cord lining to prevent dust & moisture, dully painted with required holes for cables in coming and out going of suitable capacity with starter, Amp. meter, volt. meter for running of Motor pumpset

Providing, cutting, Jointing and testing of C.I. Double Flanged pipes with casted flanged as per IS: 7181, Class-B (ISI marked with the prior approval of Engineer-in- Charge),including cost of nut bolts and rubber insertion complete including all cartage. 150 mm i/d (Total 30 mts for each pump set i.e. total of 90 mts for 3 pump set) for suction pipe from sump to pumping units & for delivery pipe manifold connecting all pumping units to HDPE pipe main line

Extra for fixing of double flanged pipes in vertical position for over head reservoir & stand pipes, scaffolding, derricks, Jim poles, tools and plants, ropes, guys, etc. Complete as desired by Engineer-in-Charge.150mm i/d pipe lines laid complete (for suction pipes)

Supplying and laying C.I. specials suction pipe from sump to pumping units as per IS:1538 complete as desired by Engineer-in-Charge conforming to ISI specifications.. C.I. specials up to 300 mm i/d.

Providing & fixing Single air valve ISI Marked as per IS-14845 including jointing , cost of nut bolts & rubber insertion all carriages complete. (e)C.I Single air valve screwed (Size 80mm) Total for (2) pumpsets = 2 nos

Proving & fixing ISI Marked Non-return valves flanged end class PN-1.0 as per IS:5312/2004 in pipe lines including jointing & cost of Nut Bolt , rubber insertion etc. complete. Note: If Non-return valves class PN-1.6 is used instead of class PN-1.0 , than 5% will be paid extra.(B) Class PN-1.0 as per ISI with gun metal flap ( d)150mm i/d Non-return valve Total for Two (2) pumpsets 1x2=2nos

Jointing of C.I. Pipes as per IS:1536, Valves and specials with lead caulked joints ,including cost of lead , yarn and cost of labour fuel and tools etc with testing complete. For 150mm i/d pipe lines Total for Two (2) pumpsets = 32 nos

Cutting of C.I. Pipes , specials and chipping or filing the surface to a uniform finish. ( C )150mm i/d pipe lines Total for Three (3) pumpsets=48nos

Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line pressure up 15kg/cm2 & including connection with main panel etc. as required complete in all respect Total for Two (2) pump sets=2 nos

Providing and fixing S.S Pressure Gauge complete as required complete in all respect.(a) Dial diameter 150mm calibration 0-16 Kg Total for Two (2) pump sets = 1 nos

Providing and fixing in position Cast Iron Foot valves flanged ends with rubber sheet as per IS 4038 including cost of Nut Bolt , rubber insertion complete in all respect 150mm i/d Cast Iron Foot valves

Providing & fixing Fire Hydrants with jointing including all carriages complete. (without Fire Hydrant surface box) Size 80mm complete in all respect. (a)C.I Fire Hydrants 1S-908

Structural steel work in compound girders or Stanchions built up from two or more R.S. joists or channel section or plates & angles etc. including cutting and fixing all lattice bars, stiffeners, gusset plates, bolts, nuts, rivets, welding rod, etc. complete with flange plates, heads, sole plates, angle connections, etc. with hoisting and erecting in position For Suction Pipe Instaling and dismantling 2 pumps

Grand total