Loading
Loading…
Loading…
Tender Value
₹9.4 Cr
EMD Value
₹18.7 L
Closing Date
9 Jun 2026, 5:00 pm4d left
SM_TENDER CELL
GNIDA OFFICE
Resurfacing work of 45.0m wide road and 24.0m wide road Sector BZP area, Greater Noida.
2026_GNIDA_1151722_23
SM/(E-TENDER CELL)/2026/752 DATED-19.05.2026
Open Tender
Civil Works
180 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹6,770
₹18.7 L
26 May 2026
26 May 2026
11 Jun 2026
26 May 2026
9 Jun 2026
26 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and applying tack coat with bitumen SS1 Grade using emulsion pressure distributor at the rate of 0.25kg/Sqm on prepared bituminous surface cleaned with mechanical broom (MORTH-5.02/503/(i)) | - | Sqm | 1 | - |
| 2Providing and laying dense graded bituminous macadam with Higher capacity batch type HMP using crushed aggregates of specified grading Premixed with bituminous binder VG-30 @4.5% by weight of total mix and filler, transporting the hot mix to work site, laying with hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve to desired compaction as per MORTH Specification CLAUSE No 505 complete in all respects (Morth/5.04/505(B)) | |||||
| 2.01 | 50mm compacted thickness with bitumen perpetration of [email protected]% by weight of total mix. (MORTH-/5.05/505(B)) | 1 | Cum | - | - |
| 3Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder [email protected]% of mix and filler transporting the hot mix to work site laying with hydrostatic paver finsher with sensor control to the required grade, level and alignment rolling with smooth, wheeled, vibrator and tendom roller to achieve the desired compaction as per MORTH specification clause 507 complete in all respect (MORTH/507(B)/5.05) | |||||
| 3.01 | 40mm compacted thickness with bitumen peretration of [email protected]% by weight of total mix | 1 | Sqm | 1 | ₹1 |
| 4 | Providing and laying 40mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-39, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of 13.2mm nominal size at rate of 0.005 cum per 10 sqm and at an approximate spacing of 10cm centre to centre in both direction, pressed into surface when the temperature of surface is not less than 1000c protruding 1mm to 4mm over mastic surface, all complete as per MORTH5.11/clause-516 (ARGNIDA) | - | Sqm | 1 | - |
| 5Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/machine material and labour required for proper completion of work. (SOR-2020/New item/Sr.No.19.01) | |||||
| 6Labour cess and GST will be paid extra as per Govt. orders. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.49 MB
PreQ_Resurf_Sector_BZP.pdf
Tender Documents • 0.98 MB
BOQ_2160699.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid