Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.2 LAccepted-AOC 30 INDUSTRIAL AREA KOKAR RANCHI 834004 JHARKHAND | RANCHI | JHARKHAND | 834004 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹47.9 L+₹5.7 L (13.6%)Rejected-Finance GALI NO 4 GAUSHALA ROAD VIKASH NAGAR RAMGARH CANTT RAMGARH JHARKHAND 829122 | RAMGARH CANTT | RAMGARH | JHARKHAND | 829122 | L2 | Rejected-Finance Quoted amount is more than L1 | |
| 3 | L3₹48.1 L+₹5.9 L (14.0%)Rejected-Finance VILL POST MANJHULI PS BAKHITIYARPUR KHUSRUPUR DIST PATNA BIHAR 803202 | NALANDA | BIHAR | 803202 | L3 | Rejected-Finance Quoted amount is more than L1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Due to wrong DD submitted by contractor |
Tender Value
₹39.7 L
EMD Value
₹79,500
Closing Date
2 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
AUGMENTATION OF ELECTRIC DISTRIBUTION NETWORK FOR MH NAMKUM AT RANCHI MIL STN UNDER GE RANCHI
2022_MES_553200_2
8400/1152/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class D Cat b (i)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹79,500
13 Dec 2022
20 Oct 2022
4 Nov 2022
21 Oct 2022
2 Nov 2022
21 Oct 2022
Amount
Excavation in trenches n. exc 1.5 m wide & n. exc 1.5 m in depth for laying under ground cables/erection of pole and getting out in hard/dense soil, complete all as specified and directed.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed.
Removal of excavated surplus material (Soil) to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point, complete all as specified and directed.
S&F GI pipe light grade100 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with, nuts and bolts, complete all as specified and as directed.
S&F GI pipe light grade 80 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts, complete all as specified and as directed.
S&F GI pipe light grade 50 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts, complete all as specified and as directed.
Taking out old/unsv/damaged PCC/steel pole complete with all accessories incl demolition of concrete with necessary excavation and earth work incl site clearance, complete all as specified and directed.
Supply and installation and erection in true vertical or to be planted as strut steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 300mmx300mm at bottom duly welded and MS pole cap at top,poles made out of ERW MS tubing confirming to IS1161 part-II, type 410 SP -31(9.0m long) including drilling of holes of required size and nos for fixing of cross arms/clamps, painting with one coat of red oxide primer and two coats of aluminum paint for expose surface and two coats of black bituminous paint for portion embedded in concrete, painting three black/white bands at lower portion of pole each of 300mm height at 300mm spacing, painting pole no. with black paint at suitable height including PCC earth work and coping and earth work, complete all as specified and directed.
M&L cross arms bracings, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paint, complete all as specified and directed.
M & L GI wire 4.00 mm dia as earth wire for continous run on HT/LT overhead line, stretching and fixed to HT/LT pole, connecting to earth terminal, complete all as specified and directed.
M&L for shackle type porcelian vitreous white ,brown or green insulator including galvanised mild steel straps washers,insulator bolts,washers and nuts of size 100 mm height and 115mm dia for 1100 volts grade complete incl taking down old/unsv insulator any type, complete all as specified and directed.
M&L loop type insulator,vitreous porcelain white brown or green with overall dimension of 65x90mm,clearance of hole 16mm, complete all as directed and specified
Danger notice plate 20x15 cm and 1.6mm thick mild steel sheet vitreous enamelled white with letter,figureand conventional skull and bones in signal red colour and fixed with MS clamp bolts/ nuts of approved size for LT 1100 Volt, complete all as specified and directed.
M&L pin type ,porcelain,vitreous white brown or green insulator including one galvanised mild steel spindle,two galvanised iron washers and one galvanised iron nut 150mm height,150mm dia for 11000 volts grade, complete all as specified and directed. Make: Jaipuriya/Rashtriya
Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron earth strip 32x6mm up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 15mm bore with funnel wire mesh and medium grade GI earth wire protection pipe 50mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion.
Taking down old unserviceable and Supply , installation testing and commisioning of LT MCCB Panel Board of suitable size cubical weather, dust and vermin proof fabricated out of CRCA sheet steel suitable size thickness complete, MCCB panel board should be manufactured and supplied by ISO 9001 certified OEM of MCCB. The Busbar system should be duly type tested at NABL lab for short time with stand current of 1 Sec. it should be suitable for wall or floor mounting with Double door option, Panel board enclouser should be robust contruction and corresion resistance powder coated with seven tank process with locking arrangement fixed on suitable size foundation 60 Cm above the GL by providing angle iron of size 50 x 50 x 6 mm welded on all the four corners embedded in PCC 1: 2: 4 using 20 mm graded stone aggregate up to 30 Cm including electrical connection with lugs & glands complete comprising the the following :- Aluminium busbar of high conductivity 630 Amps capacity 4 wire system - 01 set (a) MCCB , 400Amps , 35 KA, 04 Pole-01 Nos (Incoming) Make- Havells/L&T/Schnider (b) MCCB , 250Amps , 35 KA, 04 Pole-02 Nos (Outgoing)Make- Havells/L&T/Schnider (c) MCCB , 200 Amps , 25 KA, 04 Pole-02 Nos (outgoing)Make- Havells/L&T/Schnider (d) MCCB , 100Amps , 25 KA, 04 Pole-02 Nos (outgoing) Make- Havells/L&T/Schnider (e) Digital type panel mounted Voltmeter 0-500 volts. (f) Digital type panel mounted Ampr meter 0-500 Amps with CT's . (g) Three phase Indication lamp LED type, - 01 Set {Set of three Nos (RYB) } (h) Digital type frequecy meter ,50 Hz, panel mounted Note: All Internal connection of MCCB from BUS Bar made By using copper busbar of rated Capacity
M&L Fabrication,fixing and installation of feeder Pillar pedestal type duly enclosed weather and vermin proof IP-67 protection made out of MS Sheet 3.00mm thick for outer shed and 2.00mm thick MS sheet for inner compartment provided with 4 Pole Aluminium Bus Bar of rating 400 with 200 Amps incoming MCCB and outgoung busbar suitable upto 240 X3.5 core copper cable fixed on porcelain insulation and provision of fixing of electrical connection to incoming and outgoing cable, complete all as specified and directed. Note:- PCC Foundation for fixing for Feeder Pillar shed deemed to be inclusive of rate.
S&F in replacement of LED Street light luminaries fittings 90 watt green line a road lighting luminaries with high power LED and unique peanut to ensure uniform light distribution higher spacing between poles and maintenance free system Make-Crompton/Havells./ Phillips Note:- (i) The contractor shall produce minimum two years warrenty against any manufactures defect/ failure of fitting from the authorised representative / OEM of the make as specified and brought at site. (ii) The efficacy of system is 120 lumne/watt. (iii) The PF should be > 0.90 (iv) The LED street light fittings shall be provided with overload / under load protection with range 180 to 380 volts and inbuilt surge protection device. (v) The contractor / manufacture shall provide on site warranty should be against failure of light for carrying out necessary repair / replacement of defective street light fittings. (vi) The LED fitting and driver in fitting shall be of same make.(vii) Street light should be with phase to phase and phase to neutral protection, complete all as specified and directed.
Dismantling exixting old and unserviceable security light brackets and Supply & Fixing bracket made out of GI light grade pipe of 40 mm dia 1.5 mtr long bend to an angle of 120 degree with 02 Nos MS clamp 50mm x 500 and 04 sets of nuts,bolts and washers painting with two coats of synthetic enamel paint over a red oxide primer, complete all as specified & directed.
Earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick burried directly in ground ( earth pit not less than 2.25m deep below the ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to galvanised earth lead GI wire 4mm dia by means of bolts, nuts, check nuts and washers of GI or steel all as shown in electrical plate No 3 including charcoal dust, common salt, 20mm GI medium grade watering pipe, 15mm bore light grade earth lead protection pipe upto test point,funnel with wire mesh, PCC pit 1:2:4 type B-I using 20mm graded stone aggregate with angle iron frame, 40mm thick RCC cover with 8mm for steel bar @100 C/C both way complete all as directed by Engr-in-charge & testing for required value, complete all as specified and directed.
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 240 Sqmm nominal cross sectional area 3.5 core confirming to IS specification. (Make : HAVELLS/Finolex/Polycab)
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 120Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed. (Make : HAVELLS/Finolex/Polycab)
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 95Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed. (Make : HAVELLS/Finolex/Polycab)
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 50 Sqmm nominal cross sectional area 3.5 core confirming to IS specification, complete all as specified and directed. (Make : HAVELLS/Finolex/Polycab)
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 25 Sqmm nominal cross sectional area 4 core confirming to IS specification, complete all as specified and directed. (Make : HAVELLS/Finolex/Polycab)
Supply and laying or fixing or passing through pipe testing and commissioning of 1100 Volts grade 'Heavy duty" PVC sheathed armoured cable LT, XLPE insulated aluminium conductor multi stranded served with inner sheating of PVC tape armored with galvanised steel wire or tape and overall PVC sheathed of size 10 Sqmm nominal cross sectional area 2 core confirming to IS specification, complete all as specified and directed. (Make : HAVELLS/Finolex/Polycab)
S&F aluminium conductor steel reinforced stretching without kinks and bends and fixing to insulator on HT/LT poles using binding wires.The size of conductor shall be (a) 6/1X2.59 mm Weasel (b) 6/1X2.11 mm Squirrel (c ) 6/1X3.00mm Ferret
S&F thermo plastic cable junction box of size 300X200X105mm suitable for cable IP 65 protection with aluminium busbar 200 Amps 3 pole and neutral including MCB SP 10 Amps incl 3 no HDPE gland fixed on pole with clamp nuts bolts etc complete all as specified and directed. Make- Sintex/ Hensal/HPL
Sand filling in cable trenches for cable protection with clean dry sand unwashed including gently put in trenches, complete all as specified and directed.
S&F old size brick well burnt, laid flat, for cable protection, complete all as specified and directed.
S&F galvanized strand 7/4mm, complete all as specified and directed.
M/s Ray construction
M/S JAI MATA DEE CONTRUCTION CO.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .