Construction of P.D.Shop Building Type II at Kumarapettai in Periyapattu panchayat

Amount

Earth work excavation and depositing on banks with initial lead and lift in gravelly soil stiff clay, hard stiff clay, murram, boulders mixed with gravel as per SS 20-B for foundation.

Supplying and filling of foundation and basement with carted river sand including all materials and labour charges etc complate

Cement Concrete 1:4:8 mix using 40 mm ISS HBG metal including cost and conveyace of all materials and all labour charges, etc.

Brick work in Cement Mortar 1:5 using Country bricks including cost and conveyace of all materials and all labour charges,etc,

Brick work in Cement Mortar 1:5 using Country bricks including cost and conveyace of all materials and all labour charges,etc,Super structure

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.95 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with standard specification and as directed for the following items

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.20 m height for plane surface in all floors with all cross bracing using mild steel of size 0.95 cm x 60 cm and 10 guage stilfaned welded with mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over silver oak (c-word) joint of size 10 cm x 6.50 cm dia spaced about cnter to center and supported by casuarinas propels of 10 cm to 13 cm dia spaced at 75 cm center to center etc., complete complying with standard specification and as directed for the following items Super structure

Supply and fabrication of placing in position of steel including cost of steel and binding wire and all labour charges for cutting bending etc

RCC 1:1 1/5 3mix using 20mm ISS HBG metal including cost and conveyance of all materials but excluding centering charges including labour charges for mixing laying concrete etc., complete

Plastering with cement mortar 1:5 mix 12 mm thick including cost and conveyance all material and all labour charges etc complete

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS HBG metal to40 mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Floor finishing with Ceramic tiles of size 305x305x6mm colour tiles with design laid in cement mortar 1:3 using 20 mm thick and pointing with same colour cement of 3 kg including cost and conveyance of all materials to site and all labour charges etc complete.

Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to

Plastering with CM 1:5, 12mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:3, 20mm thick over the cement concrete for floor finish including curing etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing of cuddapah slab including all charges etc complete.

Supply and fixing of Water closet wit "P"-trap

Supply and fixing of Wash basin

Supply and fixing of CP screw down tap

PVC 4'' dia pipe

Rcc precast rings

Rcc precast cover slab

Supply of steel doors and windows Rolling Shutter 1.80 x 2.40 m

Rolling Shutter 2.1 x 2.40 m

door 1.00 x 2.10 m

door 0.9 x 2.10 m

door 0.75 x 1.80 m

Ventilator 0.90 x 0.60 m

Window W 1.00 x 1.30 m

Jolly 2.10 x 2.00 m

Painting two coat with approved quality and interior Emulsion paint over the plastered surface including cost and all other charges etc.,

Painting two coat with approved quality and exterior Emulsion paint over the plastered surface including cost and all other charges etc.,

Painting TWO coats of new iron works such as steel doors, windows,ventilators, window bars, balustrades etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats, etc., complete complying with standard specifications and as directed by the departmental officers.

a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

a)Wiring with2*1.5 mm2 (22/.3) pvc insulated unsheathed sc Cu . Conductor of 1100 v grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable

b)Supply and fixing of water tight Bulk head fitting with guard suitable for incandascent bulb

c)Supply and fixing CFL light fittng and all labor charges tc complete

d)Supply and fixing of single Type street light Flu. fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fittings for Street light

e)Supply and runoff 2*1.5 mm2 PVCinsulated SC unsheathed Cu.conductor of 1100 V garde in 25 mm dia GI pipe (class B) suitably bent at both end with necessary angle iron upright and end support for mains

f)Supply and runoff 2 of 6 mm2 (84/0.3) pvc insulated SC unsheathed Cu.conductor of 1100 v on 7/20 Gi bearer wire for service connection main

g)Supplying and fixing of 16AMS DPI Switch of 500volt with fuse and Neutral (side handle) on suitable TW/PWD Earthing SD135 Service main

h)Supplying and fixing of 1200mm(40")AC Ceiling fan with stepped electronic 300W regulator with 1m down rod on the existing clamp

EB connection chrges

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Kannan (BID ID -1395813)