Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹61.0 LAccepted-Finance | ₹61.0 L | L1 | Accepted-Finance L1 |
| 2 | L2₹61.5 LRejected-Finance | ₹61.5 L | L2 | Rejected-Finance L2 |
| 3 | L3₹63.1 LRejected-Finance | ₹63.1 L | L3 | Rejected-Finance L3 |
Tender Value
₹94.6 L
EMD Value
₹1.9 L
Closing Date
18 Mar 2026, 5:00 pmClosed
GM(P)
YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY
Construction of RCC Drain for solving water logging problem in Village-Makanpur Bangar, YEA WC-06
2026_YEIDA_1122864_5
YEA/GM(PROJECT)/2026/480 DT-27/02/2026
Open Tender
Civil Works
180 days
YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY
Please refer Tender documents.
5 documents required · 5 mandatory
₹2,127
₹1.9 L
3 Jun 2026
9 Mar 2026
19 Mar 2026
9 Mar 2026
18 Mar 2026
9 Mar 2026
Earth work in excavation by mechnical means (hydraulic excavation) manual means in foundation trenches or drain (not exceeding 1.5 m in width) or 10 Sqm on plain including dressing of sides remaining bottom, lift upto1.5 m including getting out the excavated earth and disposal of surplus excavated soil as per direction of engg. in charge with in lead upto 50 m DAR 2.8.1
Cement concrete with 4cm Guage Approved Stone ballast , Coarse Sand& Cement in the proportion of 8:4:1 including Supply of all material, Labour, Tools & Plants etc required for Proper completion of the work. UPPWD/SOR/281/P-17
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work upto Plinth Level: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (DAR 5.1.2/ UPPWD SOR 2020)
Reinforced Cement concrete work in walls (any Thickness ), including attatched Pilasters, Buttresses, plinth and String courses , fillets , columns, pillars piers, abutments , posts and struts etc. upto Floor V Level, Excluding the cost of Centring , Shuttring, Finishing and Reinforcement: (Cast in situ) 1:1.5:3 (1 Cement : 1.5Coarse Sand: 3 Graded Stone Aggregete 20mm Nominal Size) (DAR 5.2.2/ UPPWD SOR 2020)
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
Foundations, footings, bases of columns, etc. for mass concrete. (DAR/5.9.1/Based on UPPWD/SOR-2020))
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (DAR/5.9.2/Based on UPPWD/SOR-2020))
Suspended floors, roofs, landings, balconies and access platform (DAR/5.9.3/Based on UPPWD/SOR-2020))
Edges of slabs and breaks in floors and walls: Under 20 cms wide. (DAR/5.9.16.1/Based on UPPWD/SOR-2020)
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level: Thermo-Mechanically Treated bars of grade Fe-500D or more./Cold twisted bars. (DAR/5.22.6/Based on UPPWD/SOR-2020))
Providing weep holes in brick masonary /plain /Reinforced cement concrete abutments wing wall with 110 mm dia A.C./PVC pipe extending through the full width of the structure with slope 1V:20 H towards drawing face complete as per drawing and technical specifications. UPPWD/SOR-2020/33(iii)/P-6
Demolishing dry brick or Interlocking tiles on edge including stacking serviceable material and disposal of unserviceable material with in 50 metres LeadUP PWD SOR/2020DSR-18/ Based on 11.2 AR
Dry brick on edge flooring in required pattern with bricks of class designation 150 on bed including filling joints with local sand (with F.P.S bricks) complete.(Based on DAR/11.2/SOR-2020)
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 (Based on SOR UP PWD 2020)
Providing and laying 80mm thick I.S.I Mark factory made cement concrete interlocking paver block made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand and etc. all complete as per the direction of engineer in charge . with conforming to IS-15658 and IRC:SP:63. (UPPWD SOR 2020) (New SOR Based DAR 16.68)
M-150 brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work . UPPWD/SOR/303+(305)
Cement concrete with 2cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/279(a))
12 mm cement plaster of mix : 1:6 (1cement :6 coarse sand) (DAR/13.4.2/Based on UPPWD/SOR-2020))
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.96 MB
5.pdf
Tender Documents • 1.41 MB
BOQ_2091487.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid