CLEANING OF SEWAGE LINES, SEPTIC TANKS, REPAIR/ REPLACEMENT OF PLUMBING AND SANITARY WORKS, FLOORING, WELCOME MAINTENANCE TO CERTAIN BLDGS UNDER AGE B/R RND SECUNDERABAD

Amount

M&L for brickwork with sub class B bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 including demolition of existing damaged brick work complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in CM 1:6 finished even & smooth without using extra cement complete all as directed.

M&L for preparation of new plastered surface and applying two coats of ACE exterior emulsion paint over a coat of primer on walls complete all as directed at site.

M&L for Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer over 3 mm thick wall care putty (of Birla make) finished smooth complete all as directed.

M&L for preparation of old plastered surfaces of walls and applying one coat oil bound distemper complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat of Oil bound distemper complete all as directed.

M&L for preparation of old plastered surfaces of walls and applying two coats of oil bound distemper complete all as directed.

M&L for preparation of old painted wooden surafces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old painted steel/iron surafces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as directed

M&L for preparation of old plastered surface and applying one coat of ACE Exterior emulsion paint complete all as directed. Makes : Asian/Berger/Shalimar

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as directed.

M&L for preparation of old plastered surfaces of ceilings and applying one coat white wash complete all as directed.

M&L for non-skid ceramic colour tiles 7 to 8mm thick as in floors, area of each tile exc 0.06 sqm but n. exc 0.11 sqm set and jointed in neat cement slurry and pointing in coloured cement, laid over and including 15 mm thick screed bed in CM 1:6, including demolition of existing tiles alongwith screed bed complete all as directed.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick in patches in skirting and dado laid over and including 10 mm thick backing coat in CM 1:3, set and jointed with a thin layer of neat cement paste and pointing in coloured cement to match with colour of tiles including demolition of existing tiles alongwith backing coat complete all as directed.

Excavation in trenches not exc 1.5 mtr in width and not exc 1.5 mtr in depth for foundations, manholes and getting out in hard dense soil complete all as directed

M&L for cement concrete bed 1:3:6 type C2 to drain pipe of 100 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including demolition of old concrete complete all as directed.

M&L for cement concrete bed 1:3:6 type C2 to drain pipe of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested including demolition of old concrete complete all as directed.

M&L for cement concrete bed 1:3:6 type C2 to drain pipe 200 mm bore including packing under and hunching against the sides of pipes after they laid and tested including demolition of old concrete and removing debris outside of MOD land complete all as directed.

M&L for Plain Cement Concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in coping, benching including necessary from work includiing demolition of existing PCC work complete all as directed.

M&L for 100mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars including taking out existing old pipe complete all as directed

M&L for 150mm bore Reinforced concrete pipe, class NP2, laid and jointed complete with collars including taking out old existing pipe complete all as directed

M&L for 200mm bore Reinforced concrete pipe, class NP2, laid and jointed complete with collars including taking out old existing pipe complete all as directed

Returning, filling in, including spreading levelling , watering and wall ramming in laying not exc 25 cm thick using soil complete all as directed.

Removal of surplus soil to a distance exceeding 500 mtrs but not exceeding 1.50 km and deposting where directed at level not exceeding 1.5 above the starting point complete all as directed.

M&L for pre cast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover slabs, set in cement mortar (1:4) for manholes including necessary form work including demolition of old broken RCC cover, slabs complete all as directed. Note:- Reinforcement will be measured & paid for separately.

S&F TMT bars 8 mm dia cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.90 mm dia complete all as directed.

Cleaning the septic tanks of the following sizes by dewatering all the water, taking out sludge, rigid soil by mobile tank cleaners and shifting / removing the sludge out side MOD land, flushing the septic tanks with clean water in order to remove all slaked mud sludge etc cleaning the tanks with bleaching powder solution and surface dressing all around the septic tank to a distance not exc 3 mtr complete all as directed by Engineer - in -Charge.

Internal size of septic tank (6.25 m x 4.57 m x 3.05 m) at Varun Vihar.

Internal size of septic tank (14.54 m x 3.54 m x 2.60 m) at Pratap Colony.

Internal size of septic tank (6.25 m x 2.50 m x 3.05 m) at Transit Mess Note :- (i) All precaution to be taken while working foul condition.

M&L for Cleaning of all blockage, of any type of sewage line i.e, branch sewer line, main sewer line etc., by rodding and cleaning/de-sludging of manholes of any size and depth mechanically using super jetting machine or by suitable means as ordered and making the sewage line functional, cleaning the trap,water closet,soil, waste/vent pipe,gully traps upto final drop out let into first manhole/septic tanks and removing the sludge/foreign material and depositing the same outside the MOD land complete all as directed by Engr-in-Charge. Tentative quantities required to be cleaned per month shall be as under:- (a) 100mm bore sewage line -250Metre (b) 150mm bore sewage line -800Metre (c) 200mm bore sewage line -750 metre (d) Manholes of any size - 550 Nos (e) Trap/water closet -200 Nos The above mentioned quantities may be varied at the descretion of Engineer- in -charge as per requirement and nothing extra shall be claimed on this account.

Note :- (i) Adequate precautions and safety measures shall be taken while working under foul conditions and cost of the same shall be deemed to be included in the quoted rate. (ii) Contractor or his representative shall collect the complaints from complaint cell in job cards (as per specimen attached as Annex ‘A’) from the concerned JE on all days and the complaint shall be attended & rectified by the contractor on priority depending on the nature & urgency of complaint.The job card shall be returned to JE on completion of the complaint and duly signed by the User/Occupant . If the contractor or his representative fail to collect the complaints from the complaint cell on daily basis, a penal recovery of Rs.2500/day shall be recovered from the RAR/bill due to contractor.

Cleaning of storm water drain by digging out loose soil consisting of dirt,debris, leaves etc from drain and removing and depositing it in a low lying area exc 100 m distance from site, complete all as directed.

M&L for PU coated machine pressed precast concrete paver block of approved tint, shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade, as in floors/pavings laid over 40 mm thick sand cushioning layer including dismantling existing floor tile of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L PU coated machine pressed cement concrete tiles 30cm x 30cm x22 mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors laid over 20mm thick screed or bedding layer in CM 1:6, including dismantling existing floor tile of any descrption complete all as directed. Make : NAVEEN/SPARTEK/NITCO

M&L for 75mm thick PCC 1:4:8, type D2 (using 40mm garded aggregate) as in sub base including demolition of old concrete complete all as specified and directed

Taking down shutters of door/ windows area n.exc 4 sqm and refixing the same after easing adjusting and also refixing builders hardware as required incluidng renewal of unserviceable screws etc renewal of builders hardware complete all as directed.

Taking down existing PVC door shutters of any size and tightening loose joints of styles/rails, making good loose hinges and easing etc., and making the shutter fully functional and re-fixing in the same location complete all as directed.

Removal of damaged wooden beading from door/window shutters and refixing of existing bulged wiremesh n,exc 0.5 Sqm in the same position and providing new wooden beading complete all as directed.

S&F in repairs 100 mm butt hinges, medium weight, cold rolled mild steel complete all as directed

S&F in repairs aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250 mm complete all as directed

S&F in repairs 100 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as directed

S&F in repairs 150 mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all as directed

S&F in repairs 200 mm long aluminium, anodised or matt finished barrel tower bolts of extruded section complete all as directed

S&F in repairs 125 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish complete all as directed

S&F in repairs 150 mm size extruded aluminium alloy handles, fabricated type with plate, matt or anodised finish complete all as directed

S&F in repairs 100 mm size hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as directed

M&L for Welding in repairs not exceeding 2.5 cm in length and thickness of metal to be welded n.exc 6 mm including cleaning and preparing the surface together and holding the member in these position together complete all as directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading of suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane including hacking out old unserviceable glass/ broken glass panes complete all as directed.

S&F 3 mm thick figured glass, pin headed type and glazing with oil putty and glazing clip in metal frame and second class hard wood beading of suitable size for wooden frames in squares not exceeding 0.5 Sqm in each pane including hacking out old unserviceable glass/ broken glass panes complete all as directed.

S & F in repairs Mild steel powder coated curtain rod 25 mm dia of standard thickness complete all as directed.

S&F in repairs MS powder coated Curtain rod brackets suitable for 25mm dia curtain rod complete all as directed

S & F in repairs Stainless steel curtain rod 25 mm dia and 304 grade of standard thickness complete all as directed.

S&F in repairs Stainless steel Curtain rod brackets 25mm dia complete all as directed

S&F in repairs door closer, hydraulically regulated, aluminium extruded section body designation No 2 universal type (ISI marked), suitable for shutters of weight between 36 to 60 Kg complete all as directed.

S&F in repairs 40mm dia brass polished cup board knobs fixed with nut screws and washer complete all as directed

S&F in repair PVC cabinet mirror of size 450 mm x 300 mm x 155 mm complete all as directed. Make :Prayag/Polytuf

S&F in repairs mild steel spring 200mm ordinary rat tail rod pattern springs including roller and roller plate for doors complete all as directed.

S&F in repairs door magnet lock to shutter complete all as directed .

S&F in repair stainless steel plate rack of size 900x750mm heavy quality complete all as directed

S&F in repairs Venetian blinds vertical type 100mm width with polyester fabric of approved colour & pattern including powder coated aluminium fittings of top rail .weight and nylon button /loops etc fixed complete all as specified and as directed. Make : Vista/Levador/Amar

S&F in repairs Multicolour double layered, black out fabric roller zebra blinds horizontal type including hanging mechanism water resistant, UV protection for window complete all as directed. Make: Vista/Levador/Amar

S&F in repairs nylon net mosquito proof with wire cloth best quality colour complete all as directed

S&F in repairs stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter including replacement of broken wooden beadings , as per requirement complete all as directed.

S&F in repairs Brass cupboard locks heavy duty of size 75mm and 4 levers with duplicate keys complete all as directed.

S&F in repairs stainless steel peg set of 06 hooks fixed with stainless steell screws complete all as directed.

S&F in repairs 5.5mm thick sheet glass shelf assembly 60 cm long & 12 cm wide with chromium plated bracket guard and railing fitted with stainless steel screws complete all as directed.

S&F in repairs corner glass shelf 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as directed

S&F in repairs floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of size 140mm (over all length of cover plate) including vulcanised rubber piece complete all as directed.

M&L for 12mm thick Plywood, 7 layered grade BWR type, with screw to timber frame work including taking down the existing boarding complete all as directed.

M&L for 19mm thick particle board exterior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work including taking down existing particle board complete all as directed.

S&F in repairs stainless steel floor lock for glass door with quadruplicate Keys complete all as directed. Make:- OZONE

Taking down chowkats or frames with shutters of area exc 1.5 Sqm but not exc 4.0sqm (without taking off shutters from frames) complete all as directed.

Taking down chowkats or frames with shutters of area n exc 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as directed.

Taking down the shutters of any description exc.1.00sqm but not exc.2.00sqm complete all as directed

S&F M.S frame of size 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate etc complete all as directed.

S&F M.S frame of size 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as directed.

M&L for PCC 1:3:6, type C0 ( using 12.5 mm graded stone aggregate ) as in filling in pressed steel door frames set in CM 1:6 complete all as directed.

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate as in bed block for hold fast etc complete all as directed

S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,type B-21 anodised complete all as directed

S&F 200 mm long aluminum anodized barrel tower bolts of extruded section complete all as directed

S&F extruded aluminum alloy handle fabricated types of size 200mm complete all as directed.

S&F wood grain finished factory made Solid PVC Door Frame of size 50mm x 47mm, box type, made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, complete all as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC strip of 20 mm width struck inside with solvent cement for stiles & but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face,with particle board core as per specification & drawing complete all as directed

S&F 35mm thick factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fixed to chowkats, including M&L for providing members of wooden stiffeners of size 60x30mm horizontally and vertically to each top panel and vertically to each bottom panel of wire gauge shutter complete all as specified and directed

S&F stainless steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature and fixed along with aluminium anodised mesh of size 10x10x1.0mm thick fixed with tinned tacks or galvanised wire staples etc as in panels of wire gauzed shutter complete all as specified and directed.

M&L for preparation of new painted wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of wooden primer complete all as directed.

Supply & fixing of UPVC windows or UPVC framed portion 3 track 3 panel sliding window with two glazed and one wire mesh sliding shutters of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, anti lift device on slide windows with temper proof screws with and including glazed shutter fixed with 5 mm thick tinted float glass & wire mesh shutter with stain less steel wire cloth 304 grade stainless steel with 0.254 mm (30 gauge) dia of steel wire and 0.95 mm width of aperature complete all as directed including taking down old steel windows complete all as directed

Supply & fixing of UPVC windows/ventilators with top hung shutters made out of profile width of from 56 mm to 62 mm, limit thermal conductivity to l.3 Kcal/sqm/hr centigrade, sound insulation up to 4-0 bds, Density, 1.46 gm/ml, Tenstile strength - 43.9N/sqmm, % Elongation at break - 215, Tenstile mpduls - 2840N/Sqmm, Flexural strength - 51N/sqmm, Heat aging at 150 degrees - No surface defect, Thickness - 2 mm, Flexural moduls elasticity 2200N / sqmm, double baskets & wool pile on window, multi point gear locking at different sides of frame, with peg stay of suitable size to keep hung shutter in open position, with temper proof screws with and including glazed shutters fixed with 5 mm thick tinted float glass complete all as directed including taking down old steel ventilators all as directed

S&F MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including dismantling of existing iron work

M&L for preparation of new steel surface of any description over 10cm width or grith not otherwise described and priming with red oxide zinc chrome primer and finished with two coats of synthetic enamel paint complete all as directed.

M&L for Providing and fixing false ceiling with light weight calcuim silicate tiles of spin tone surface textured Aerolite make or equivalent of sixe 595x595 mm having 15mm thick dexnsifed micro look edge in true horizontal level suspended on silhouette profile suspension system of grid made from hot dipped G.I. steel section potary stitched double webbed power coated white consisting of main T- runner 42mmx14mm and 0.30mm thick and cross T of sixe 33mm x14mm and 0.30mm thick placed at 60cm centre to centre having width of flange 14mm with a 6mm reveal profile,(Black). The grid system to be rested on the periphery wall/partitions on a W-profile wall section made of pre-coated Galvanized steel of diamension 3.00mm long x(15mmx10mm) x22.5mm and laying false ceiling for services like diffusers grills including cutting making opening for services like diffusers grill light fitting, fixtures smoke detectors including taking down existing damaged ceiling complete completely all as directed.

M&L for light shade vitrified ceramic tiles of 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.36 sqm but not exc 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and 20 mm thick screed bed in cement mortar 1:6 including disnantling of existing tiles along with screed bed complete all as directed.

M&L for double charged vitrified ceramic tiles of approved shade 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm but not exc 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and 20 mm thick screed bed in cement mortar 1:6 for laying of floor tiles including disnantling of existing tiles along with screed bed complete all as directed.

M&L for glazed ceramic coloured tiles of size 300 x 600 x 7mm thick in patches in skirting and dado laid over and including 10 mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointing in coloured cement to match with colour of tiles including dismantling of existing tiles along with backing coat complete all as directed.

M&L for cutting and grinding to existing terrazzo floor/ skirting including wax polishing complete all as directed.

S&F in repairs brass mortice lock 100mm long vertical type 4 levers fixed to shutter with 2 duplicate keys with handles complete all as directed.

S&F MS framed work as in tubular trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc including dismantling old MS work complete as directed.

S&F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling of old sheeting complete all as directed.

Repairs to leaking bib tap, pillar tap, stop cock, angle cock and gate valve of 15 & 20mm dia by changing spindle as required to complete the defect all as directed.

Removal of air lock/blockage in 15mm/20mm bore GI water tubing, cleaning the pipe and fittings etc and refixing the same in position complete all as directed.

Resecuring loose/ hanging 10Ltr capacity PVC flushing cistern including brackets/ gutties as required including connecting water pipe and flush pipe complete all as directed.

S&F in repairs GI tubing of 15 mm bore medium grade with all fittings complete all as directed.

S&F in repairs GI tubing of 20 mm bore medium grade with all fittings complete all as directed.

S&F in repairs GI tubing of 25 mm bore medium grade with all fittings complete all as directed.

S&F in repairs stainless steel grating of 125 mm dia chromium plated grating for nahani traps with or without hole for waste pipe complete all as directed

S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated long body fancy type with capstan head, screwed down, screwed for iron pipe complete all as directed.

S&F in repairs chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete

S&F in repairs 15 mm bore brass, chromium plated, angle cock, screwed for iron pipe complete all as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as directed.

S&F in repair Gun metal, globe or gate valves for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed.

S&F in repair Gun metal, globe or gate valves for 25mm bore pipe with iron wheel head, screwed both ends for iron pipe complete all as directed

S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 600 mm long between flanges complete all as directed.

S & F in repair 20mm dia PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as directed

S & F in repair 15mm dia PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixedcomplete all as directed

S & F in repair 25mm dia PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed iron pipe and fixed complete all as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white, including plastic seat cover, white, closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as directed.

S&F in repairs vitreous china squatting pan "orissa" pattern of size 580x440mm white with integral foot rest including provision of P or S trap including connection to flushing pipe and making good to floor complete all as directed. Note :- cost of Demolition of tiles/concrete and proven of concreting required for setting trap and making good to floor shall be deemed to be included in the quoted rate

Supply and fix in repairs vitreous china wash basin, white, flat back, of size 550 X 400 mm including 32 mm dia PTMT waste coupling, PVC waste pipe incl brackets complete all as directed.

Supply and fix in repairs 125 mm dia brass chromium plated shower rose with swivel joints with stainless steel arm complete all as specified and as directed

Supply & fix in repairs pillar taps of 15 mm bore fancy type cast copper alloy with capstan heads, chromium plated,screwed down high pressure with or without lettered hot cold with long screwed shanks and fly nuts screwed for iron pipe complete all as directed

S&F in repairs 15 mm dia brass chromium plated two in one tap screwed for iron pipe complete all as directed Make: F330004CPof Hindware or equivalent in parrware

S&F in repair CP brass 3 in 1 wall mounted mixture with telephone hand shower complete all as directed. Make: Jaquar/Hindware/Parryware

S&F in repair telephone hand shower complete all as directed. Make:Jaquar/Hindware/Parryware

S&F in repair Health faucet,cast-copper alloy, chromium plated including all necessary fittings complete all as directed. Make:F160013CP of Hindware or equivalent as approved

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I including dismantling of existing damaged PVC tank complete all as directed.

M&L for white rotational moulded triple layered polythene water storage tank (cylindrical vertical with threaded lid) hoisted and fixed in position all as specified in SSR part I including dismantling existing damaged PVC tank complete all as directed.

Cleaning and removing all scale and dirt etc from water tanks of capacity 500 ltrs and from mouths of circulating pipes etc complete all as directed.

Cleaning and removing all scale and dirt etc from water tanks of capacity 1000 ltrs and from mouths of circulating pipes etc complete all as directed.

S&F in repairs Urinal sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:- Hindware or equivalent

S&F in repairs WHB sensor, solonet Valve, Battery box along with batteries complete all as directed. Make:-Jacquar or equivalent

Taking down of existing concealed type flushing cistern and repair and replacement of wall cock, syphon and anglecock and refixing in the same position complete all as directed.

S&F in repairs CP overhead shower of size 12" × 12" suitable for cubical shower panel complete all as directed.

Supply and fix in repairs of brass chromium plated towel rack 600 mm long with lower hangers, brass screws and wooden/plastic cleats complete all as specified and as directed. Make: CAT No F880008 of HINDWARE or equivalent in PARRYWARE/CERA as approved

Supply and fix in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. Make: CAT No F880003 of HINDWARE or equivalent in PARRYWARE/CERA as approved

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed MAKE: CAT No 92071 of HINDWARE (S-10) plaster colour or equivalent in PARRYWARE/CERA as approved

Supply and fix in repairs vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement with grating and union for discharge pipe complete all as specified and as directed Make: 60002 of Hindware or equivalent as approved

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as directed

S&F 140 mm long door stopper aluminium anodized with rubber shoe, nut (2 each on one stopper) with spring complete all as directed.

Sai construction & services