ADDITION ALTERATION AND SPL REPAIR TO SWIMMING POOL AT ARTY CENTRE HYDERABAD UNDER GE GOLCONDA

Amount

Demolition of cement concrete on ground floor and paving n exc 15 cm thickness (below are above ground level complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded stone aggregate) as in sub-base complete all as specified and directed.

M&L glass mossaic tiles in floors of approved make (combination of dark blue and light blue chips in the ratio of 50:50) or any other colour and including necessary adhesive as per manufacturers instructions and 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L glass mossaic tiles in vertical surfaces (combination of dark blue and light blue chips in the ratio of 50:50) or any other colours and including necessary adhesive as per manufacturers instructions and 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square or rectangular) in floors area of each tile exc. 0.06 sqm but not exceeding 0.16 sqm, in floors etc, and including 15 mm thick cement screed in CM 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L coloured glazed ceramic tiles of tile size 450 mm x 300 mm x 7 mm thick in skirting / dado laid over and including 10 mm thick backing coat in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed.

M&L vitrified ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exc. 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring (in any pattern) and jointed with coloured cement matching with surfaces of tiles and including 15 mm thick screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles and including dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish of the premises complete all as specified and directed complete all as specified and directed

All as per Sl item No. 7 above but for vertical surfaces such as skirting, dados and riser to steps laid over 10 mm thick backing coat in cement plaster 1:3

M&L rubber moulded chequred concrete tiles of size 30 cm x 30 cm x 25 mm thick in grey cement with pigments set jointed and pointed in neat cement slurry laid over and including 20 mm screed bed in CM 1:6 and 75 mm thick PCC 1:4:8 sub base complete all as specified and directed.

S&F in repairs three layer white in colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position and including all necessary fixtures and fittings complete all as specified and directed.

S&F in repairs 20 mm dia brass ball valve, high pressure with polyethene float and fly-nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore bib taps, chromium plated cast copper alloy but fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15 mm dia fancy type stop valves / angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs 125 mm size brass chromium plated shower rose fixed with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange with or without swivel joints and including fixing to steel pipe or union fixed complete all as specified and directed.

S&F in repairs health faucet with (hand shower) chromium plated and including all fittings fixtures complete all as specified and directed.

S&F in repairs brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair two way bib tap / cock 15 mm bore, chromium plated fancy type complete all as specified and directed.

S&F in repairs wash down water closet (pedestal pattern) complete white with and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and flush pipe of polyethelene of low or density of PVC 32 mm dia for low level flushing cistern, pedestal pan and trap, and connection to drain (or outgoing pipe) complete all as specified and directed.

S&F in repairs for vitreous china wash basin, white, flat back of size 550 x 400 mm and including 15 mm cast copper alloy CP fancy type pillar tap, 32 mm waste coupling, MS brackets, cutting for and pinning in ends of brackets complete all as specified and directed.

S & F in repairs PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle and including brackets and 32 mm PVC flush pipe complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia, 45 cm long with brass ferrules on both ends fixed complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated complete all as specified and directed.

S&F in repairs PTMT shelf of weight not less than 300 gms with soap dish (tray) fixed with and including chromium plated brass screws and wooden / plastic cleats etc, complete all as specified and directed.

S&F in repairs PVC (SWR ) pipes 110 mm bore single socketed, in any length with rubber ring joints as rain water, soil waste and vent pipe (with all fittings) fixed to wall complete all as specified and directed.

All as per Sl. Item No. 26 above but laid in trenches or in floors.

S&F in repairs PVC (SWR ) pipes 75 mm bore single socketed, in any length with rubber ring joints as rainwater, soil waste and vent pipe (with all fittings) fixed to walls complete all as specified and directed.

All as per Sl. Item No. 28 above but laid in trenches or in floors.

M&L praparation of old treated ceiling surfaces and including applying two coats of white wash complete all as specified and directed.

M&L complete removal of existing treatment of walls and including applying two coats of oil bound distemper over a coat of alkali resistant primer and 2 mm thick wall care putty complete all as specified and directed.

M&L preparation of old external wall surfaces and including applying one coat of exterior weather coat emulsion paint complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75 mm dia outlet, plain with grating and including jointing with solvent cement complete all as specified and directed.

S&F PVC waste pipe for urinal / WHB with fitting etc, 38 mm dia, 60 mm long complete all as specified and directed.

S&F in repairs swimming pool diving board fixed at a height of 3 m equipped with forward and backward moving mechanism for adjustments to match with the existing board as per manufactrers intructions & swimmimg pool standards complete all as specified and directed.

All as per Sl. Item No. 35 above but a height 7.5 m

M&L preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per Sl. Item No. 37 above but old painted wooden surfaces .

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in roofs etc, complete all as specified and directed.

M&L 25 mm average thick, PCC 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling course over the roof slab and including 10 mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished fair and even without using extra cement and removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, brushing neat cement slurry with 3 kg of cement per Sqm complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only liquid water proofing compound

M&L water proofing treatment with APP based polymeric membrane minimum weighing 3 kg / sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms / sqm) and including primed surface by forced application with non woven polyester matt black finished over compatiable primer at 0.3 litre per sqm, torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface and including finally finished with a coat of bitumastic aluminium paint over the membrane. The over lap joint shall be provided of 100 mm in longitudinal direction and 150 mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage as per manufactures instructions complete all as specified and directed. Note : The work shall be carried out by authorized applicators of manufacturers.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, conduit wiring etc, and including making good, cutting not exc. 10 cm grith complete all as specified and directed.

M&L in repairs 16 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors and including special fittings (Unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc,) complete all as specified and directed.

M&L in repairs 20 mm bore GI tubing medium grade with all fittings fixed to wall / ceiling or in floor and connections in any position complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame exc. 1.5 Sqm and n. exc. 4 Sqm each complete all as specified and directed..

All as per Sl. item No. 46 above but n. exc. 1.5 Sqm

S&F pressed steel door frame 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L second class hard wood plain solid, straight chowkats and frames wrought, framed rebeated on the solid rounded or chamfered out together with glue pinned at joints complete all as specified and directed.

M&L second Class hard wood 35 mm thick flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

M&L FI for hold fasts, bands, straps, supports or stays for rainwater, ventilating pipes and including bolts, if required; hooks (stay), heavy for large gates; hook & pintle hinges; large hasps & staples; chains; hand made slidings bolts; clamps; hold fasts; wall ties; & similar small articles conforming to Fe 290 GDE E-165 complete all as specified and directed.

M&L treating ends of posts, backs of chowkats etc, area tarred exc. 0.1 sq.m but n. exc. 0.5 sqm. each treated with tar or coal tar black paint complete all as specified and directed.

M&L treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of chowkats etc, area n. exc. 0.1 sqm each treated with tar or coal tar black paint complete all as specified and directed.

S&F butt hinges 100 mm medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F extruded aluminium alloy handles150 mm fabricated type anodized complete all as specified and directed.

S&F aluminium 200 mm anodized barrel tower bolts extruded section & fixed complete all as specified and directed.

S&F 300 mm mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or grith and including applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and directed.

M&L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or grith and including applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 150 mm floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification complete all as specified and directed.

M&L factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside complete all as specified and directed.

S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and directed.

S&F in repairs harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers etc, complete all as specified and directed.

S&F MS flats / angle iron welded with required shape and embedding in concrete & screwing etc, and including cutting tops to shape as directed, flat iron clamps (for securing pipes etc.) all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 complete all as specified and directed.

M&L plates (plain or chequered) channels, square cut or notched (ordinary & counter sunk) forming holes, without any attachment GDE Fe 410-w grade A all as specified and directed.

M&L cutting suitable size of opening in existing MS filtration plant of cylindrical shape of approximate size 4.30 m length and 2.50 m dia and including taking out complete existing filter media and pressure filter nozzle plates, pipes, supporting MS angles etc, takings out the sludge cleaning of filter drum with necessary cleaning liquids, refixing the filter nozzels plates with pressure pumps, filling with new multi grade quartz filter media, applying pressure filter with anti corrosive painting inside / outside, testing, commissioning the pressure filter after back wash on completion as per swimming pool water standards (IS-3328 -1993) and making good as per existing cutting porting complete all as specified and directed.

Note:- (a) Supply only filter media will be measured and paid separately. (b) The quoted rate is deemed to be include for refixing of pressure filter nozzle plates, pipes, supporting MS angle after cleaning of filter plant. and removal of old filter media exc.1 km distance and deposited (c) Contractor shall submit test report of water standard of swimming pool as per IS 3328.

Supply only quartz filter media pebbles 25 to 38 mm suitable for water filtration system. Note:- (a) Labour element for filling filter media is included in the quoted rate of Sl Item No. 67 of BoQ. (b) Contractor should submit written guarantee of 02 years for effective functioning of filter media. (c) Grading of filter media shall be as per latest swimming pool standards.

All as per Sl. Item No. 68 of above but 06 to 12 mm

All as per Sl. Item No. 68 of above but 03 to 06 mm

All as per Sl. Item No. 68 of above but 1.50 to 03 mm

All as per Sl. Item No. 68 of above but 0.80 to 1.50 mm

M&L welding and fabrication of MS handles / U-shaped channel of size 200 x 200 x 3658 mm made out of hard rolled sheet of thickness 3.0 mm and including supporting clamps of size 800 mm, made out of flat iron 40 x 4 mm for holding of fabricated channel and including 02 Nos. of 150 mm GI flanges with nut bolts, washers and rubber packing, preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer and dismantling complete all as specified and directed.

M&L MS rolled steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) of Fe- 290 (Gde E- 165) and including dismantling complete all as specified and directed.

S&F in repairs pressure filter Nozzle PVC heavy duty to match with the existing make and model of the filter as per manufacturers instructions complete all as specified and directed.

S&F helical type flexible pipe of size 50 mm dia suitable for suction sweeper to match with the existing equipment complete all as specified and directed.

S&F suction sweeper stainless steel plate of size 3'x1'x 8 mm thick with nylon brushes and connected items to match with the existing equipment complete all as specified and directed.

S&F in repairs cast iron sluice valve 80 mm bore, with stainless steel spindel and cast iron body with clamps and check nuts, opertating hand wheel, both end flange and drilled conforming to IS 148 46-2000 type PN 1.6, ISI marked and including jointing materail such as rubber insertion gas kit with suitable bolts, nuts and washers etc, complete all as specified and directed.

All as per Sl. item No. 78 above but 100 mm bore.

All as per Sl. item No. 78 above but 150 mm bore.

All as per Sl. item No. 78 above but 200 mm bore.

M&L taking down ceiling fan and including dismantling blades and removing fan and blades to keep safe custody, painting of ceiling fan with deco paint by spraying, cleaning all dust & refixing of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan after completion of repairs complete all as specified and directed.

M&L point wiring 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS: 694 :1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories concealed in wall / ceilling, continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistanderd copper conductor connected to common earth and dolly, necessary modular metal flush boxes concealed in walls and modular white plate covers with frame for mounting for modular switches / sockets / fan regulators etc, and including taking down for the following complete all as specified and directed :-

One light point controlled by one switch.

One ceiling fan & wall mounted fan controlled by one switch & regulator.

One exhaust fan controlled by one switch.

One 3 pin socket 6 Amp on independent board.

One 3 pin socket 6 Amp on same board.

All as per Sl. item No. 83 above but for one 3 pin 15 Amps switch socket outlet point on independent board with 4.0 sqmm

S&F modular switch, single pole, one way, 6 Amps one module complete all as specified and directed.

S&F modular 6A, 3 pin universal socket outlet, 2 module complete all as specified and directed.

S&F modular switch, single pole, one way, 16 Amps one module complete all as specified and directed.

S&F modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and directed.

S&F ceiling rose surface bakelite three terminal / PVC / Polycarbonate / isolated body 65 x 50 mm, terminals 240 volts complete all as specified and directed.

S&F modular stepped type electronic fan regulator 220 volts,100 watt complete all as specified and directed

S&F exhaust fan 230 mm sweep made of sturdy engineering plastic with louvers shutter, voltage 230V, 50 Hz, 1200 RPM, copper winding of sweep complete all as specified and directed

M&L submain wiring using 2 runs 6 Sqmm of FR-LSH grade PVC insulated, unsheathed, stranded, copper conductor cable conforming to IS 694 : 2010 and one run of 6 Sqmm FR-LSH grade PVC insulated, unsheathed, stranded, single core, copper wire to be drawn in and including not less than 25 mm size PVC Conduit (medium grade) in concealed wiring of suitable size and including making good of disturbed surface of wall / ceiling / floor as specified in IS 732: 2019 and taking down complete all as specified and directed. Note : 2 runs of 6 Sqmm copper wire, 1 run of 6 Sqmm copper wire & one run PVC Conduit shall be measured as one unit

S&F 20 W decorative, wall mounted, ultra slim, polycarbonate, LED lighting fixture (605 x 66 x 76 mm), 6500 K with high lumen output, environmental friendly, energy efficient with electronic driver complete all as specified and as directed. MAKE: Havells cat No. STOUTPLUS600 BS20WLED840SPCWH or techno-commercially equivalent in Bajaj / Philips / Wipro / Crompton / Orient Electric / Surya Roshni / Polycab / M/s Shakti Fixtures Pvt Ltd

S&F LED luminaire 600 mm x 600 mm, 35 / 36 watt, 220 V AC surface mounting type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED BLDG Security Light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant and including thermal management in multiple optics with IP 66 protection complete all as specified and directed.

S&F sheet metal enclosure IP-43 double door for DBs (where MCBs are reqd) SPN 240 V, for 8 ways, complete all as specified and directed.

S&F sheet metal enclosure MCB distribution board and including 100 Amps bus-bar single pole and neutral 240V, 4 Ways, double door and including taking down complete all as specified and directed.

S&F factory made pre wired TPN 4 ways distribution board in sheet steel enclosure vertical single door with suitable rated bus bar, 415 Volts suitable for housing TPN MCBs as incomer and SP MCBs as outgoing complete all as specified and directed.

S&F RCBOs SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and directed.

S&F RCBOs FP 63 Amp, 240 volts 50Hz AC supply, complete all as specified and directed.

S&F MCB SP 06 to 32 Amp, 240 volts complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, checknuts and washers all as shown in electrical plate No.3 of SSR Part I, testing complete all as specified and directed.

Notes: The unit rate shall also include for excavation, earth work in hard / dense soil, PCC 1:3:6 mix, cement earth pit and pit cover, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50 m long. Earth strip and protection pipe beyond 7.5 m shall be measured and paid separately.

M&L earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6 mm thick buried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth strip of 25 x 4 mm size drawn through and including GI protection pipe of light grade 25 mm bore by means of bolts, nuts, checknuts and washers all as shown in electrical plate No.3 of SSR Part I, testing complete all as specified and directed.

Notes: The unit rate shall also include for excavation, earth work in hard / dense soil, PCC 1:3:6 mix, cement earth pit and pit cover, GI funnel with watering pipe, wire mesh, protection pipe for earth lead upto 7.50 m long. Earth strip and protection pipe beyond 7.5 m shall be measured and paid separately.

S&F LED under water light 6 x 3 w RGB LED outdoor under water fountain light, IP68, suitable for water fountains, RGB with remote control operations with all necessary accessories for fixing complete all as specified and directed.

S&F post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant and including driver and lamp complete all as specified and directed.

S&F LED under water light 1 x 12W, 12V RGB LED outdoor swimming pool under water light, IP68, 1200ln suitable for swimming pool and including grouting with necessary PCC work under the swimming pool complete all as specified and directed.

Sri Associates (BID ID -3394278)

NAVANAND ENTERPRISES (BID ID -3388948)

A SOMA RAJU (BID ID -3393335)

Sri Lakshmi Enterprises (BID ID -3393246)

rahi consultant (BID ID -3394029)

STANDARD AGENCIES (BID ID -3393154)

Sukhdevraj Sharma Engineers & Contractors Pvt Ltd (BID ID -3391435)