SPL REPAIR TO BLDG NO T-134, T-172 AND ROOF OF T-34 AT NAUGAM UNDER GE 969 EWS

Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar, complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old sizes) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6), complete all as specified and as directed.

M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work, complete all as specified and as directed.

M & L 2nd Class soft wood as in scantling, clean swan timber framed and fixed, complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets, complete all as specified and as directed.

M & L for PVC hollow/perforated interlocking wall/ceiling paneling of 2mm thick prelaminated PVC sheet. The panel & strips shall be of 600kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M. S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondigly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement. Note : Timber work where required shall be included in the same item.

M&L for 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work in partition, complete all as specified and as directed.

M&L for 2nd class soft wood 20 mm thick in facia/eaves boarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed.

M & L sheet glass ordinary quality 4.00 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden doors and windows frames, complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for glazed ceramic tiles in vertical surface 450x350x7mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and including 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed.

Demolition cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

M & L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and as directed.

M&L 100 mm thickness Cement concrete type D2, 1:4:8 (40mm graded aggregate) as in flooring, complete all as specified and as directed.

M&L 40 mm thickness Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring, complete all as specified and as directed.

M & L for vitrified tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:4), complete all as specified and as directed.

M & L for non skid coloured printed ceramic tile 8 to 10 mm thick ( Square /rectangular /in joint less) exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed in CM (1:4), complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), complete all as specified and as directed.

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed.

S&F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010 as specified.

S&F Butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type,anodised , complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (one piece type) ivory with PVC sheet cover & flushing cistern, flushing pipe), including making good the floor with adjacent floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/watse materials to a distance n. exc 50m, complete all as specified and directed. Make of WC (Hindware Cat No. 92043 (INOX) and CERA-COMFY Cat Part No. 2075/Parryware

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern ) incl flush pipe 60 cm long, complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed.

S&F in repairs for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule, complete all as specified and as directed.

S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle fancy type, screwed both ends for iron pipe or for unions and fixed, chromium plated, complete all as specified and as directed.

S&F Vitreous China wash hand basin with pedestal, white, flat back size 550x400mm excluding tap, chain, plug but including brackets and cutting for providing ends of brackets fixed in repair, complete all as specified and as directed.

S&F Central hole basin mixer Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed.

S&F Wall mixer two-in- one Brass CP for mixing hot & cold water screwed down for iron pipe and fixed for mixing hot and cold water screwed down for iron pipe and for OH shower fixed for 15mm dia bore pipe fixed in repair, complete all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing ,complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 mm long between flages, complete all as specified and as directed.

Taking down or up 15mm bore GI tubing including cleaning for refixing or removal to store etc.

Taking down or up 20mm bore GI tubing including cleaning for refixing or removal to store etc.

S&F 15mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F 20mm bore medium graded GI tubing with all fittings and fixed complete to wall and ceiling or laid in trenches, complete all as specified and as directed.

S&F mild steel framed work such as grills, frame work of water tanks FE 290 Gde E-165, complete all as specified and as directed.

S&F in repairs 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs etc,including tank nipples, fittings, including dismantling of existing water tank any type, disposal of rubbish, complete all as specified and as directed.

S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc, complete all as specified and as directed.

S&F in replacement of 20mm bore gun metal gate valves, with iron wheel head, screwed both ends suitable for iron pipe, complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs, complete all as specified and as directed.

S&F 125mm dia CP grating doom with/without waste hole (Minimum weight 40 gms), complete all as specified and as directed.

Taking down pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc, complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint laid in trenches or in floors etc, complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls etc, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) Bends with accesss door etc, complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) junction single (Single T) equal of unequal, complete all as specified and as directed.

M&L for 125/110 mm PVC (SWR) trap setting and jointed with solvent cement, complete all as specified and as directed.

M&L for 75 mm PVC (SWR) floor trap setting and jointed with solvent cement, complete all as specified and as directed.

M&L Granite (of any type), 18- 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platform partition of wall and like in cement mortar (1:4) incl pointing in white cement (1:2) using marble dust with admixer of pigment to match with marble shade, icluding making full curving the edges and cutting to shape whereever required, complete all as specified and as directed.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of Pink primer, complete all as specified and as directed.

Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girth including knotting and stopping and all preparation work required and applying two coat of synthetic enamel paint as approved of any shade/colour in camouflage pattern, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed.

M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigmentsover 15 mm thick screed bed in CM (1:4), complete all as specified and as directed.

S & F Lagging to pipes used in internal water supply or plumbing all round with, 50mM thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, complete all as specified and as directed.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface, complete all as specified and as directed.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed FRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for light and fan point.

All as per above item No. but One light/bell/Fan /Ex Fan/ bell point controlled by one switch

All as per above item No. but One switch socket combination 5 Amps on independent board

All as per above item No. but One 3 pin 5 Amp switch socket outlet on same board

All as per above item No. 68 herein before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 2.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly, complete all as specified and as directed.

S & F Modular switch 1 way 6A,1 module piano flush type single pole one way, complete all as specified and as directed.

S&F Modular Switch socket combination 3 pin 6 amp' multipurpose 2/3 pin suitable for 6 Amp plug top controlled by one switch, complete all as specified and as directed.

S & F Modular switch socket outlet two in 1 3 Pin, 6 Amp, 230 Volts, complete all as specified and as directed.

S & F Moddular Switch socket Combination16A, 5 pin, 3 module, complete all as specified and as directed.

S & F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all as specified and as directed.

Supply and fixing modular White cover plate with frame,8 module, complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed.

M & L Sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM

S & F in repairs MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and as directed.

Supply and fix in repairs amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of 6 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 AMP of current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.

Material and labour for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cables flat or circular 16 sqmm 2 core, complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work, RFR and removal etc

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and as directed.

M&L for Steel Water Tubing of medium grade with all fitting laid in trenches/ floor/duct/ ceiling/wall for the bore of tube 15mm, complete all as specified and as directed.

Note:- Schedule of credit Rs 39,161.80 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Please Enable Macros to View BoQ information