REPAIRS /RECANNING OF CHAIRS DINING, CHAIR EASY, CHAIR WRITING, STOOL CB, BIN SOILED LINEN AND CERTAIN WOODEN FURNITURE AND REPAIRS TO SOFA SETS 4/5 SEATS AND POLISHING OF WOODEN FURNITURE AT BSO (SOUTH) UNDER GE (SOUTH ) SECUNDERABAD

Amount

Chair Dining/ Chair CBB (Drawing No. FD - 16/203/228/262/279/ DB-3970) Dismantling of unserviceable Rear leg from Chair Dining/Chair CBB and replacing the same by S & F new rear leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge.

All as per Ser item No.01 above, but front leg of Chair Dining / Chair CBB as per drawing.

All as per Ser item No.01 above, but bottom side rail of seat of Chair Dining / Chair CBB including drilling holes at 12.5mm C/C for canning as per drawing

All as per Ser item No. 01 above, but for front and rear rail of seat of Chair Dining/Chair CBB including drilling of holes @ 12.5mm C/C for canning as per drawing.

All as per Ser item No. 01 above, but for stiffner of Chair Dining/Chair CBB as per drawing.

All as per Ser item No. 01 above, but for back rest of Chair Dining/Chair CBB as per drawing.

All as per Ser item No. 01 above, but for 1st Class teak wood Brackets of size 75x75x25mm of Chair Dining/Chair CBB as per drawing.

Chair Writing (Drawing No.FD-20/250/280/202) Dismantling of unserviceable Rear leg from Chair Writing and replacing the same by S & F new rear leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge. .

All as per Ser item No.08 above, but front leg of Chair Writing as per drawing.

All as per Ser item No.08 above, but bottom side rail of seat of Chair Writing including drilling holes at 12.5mm C/C for canning as per drawing

All as per Ser item No. 08 above, but for front and rear rail of seat of Chair Writing including drilling of holes @ 12.5mm C/C for canning as per drawing.

All as per Ser item No. 08 above, but for stiffner of Chair Writing as per drawing.

All as per Ser item No. 08 above, but for arm rest of Chair Writing as per drawing.

All as per Ser item No. 08 above, but for back rest of Chair Writing as per drawing.

All as per Ser item No. 08 above, but for 1st Class teak wood Brackets of size 75x75x25mm of Chair Writing as per drawing.

Chair Easy (Drawing No.FD-17/201/229) Dismantling of unserviceable Rear leg from Chair Easy and replacing the same by S & F new rear leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge.

All as per Ser item No.16 above, but front leg of Chair Easy as per drawing.

All as per Ser item No.16 above, but bottom side rail of seat of Chair Easy including drilling holes at 12.5mm C/C for canning as per drawing

All as per Ser item No. 16 above, but for front and rear rail of seat of Chair Easy including drilling of holes @ 12.5mm C/C for canning as per drawing.

All as per Ser item No.16 above, but for top and bottom rail of back rest frame of Chair Easy including drilling holes at 12.5mm C/C for canning as per drawing

All as per Ser item No. 16 above, but for side rail of back rest frame of Chair Easy including drilling holes at 12.5mm C/C for canning as per drawing.

All as per Ser item No. 16 above, but for arm rest of Chair Easy as per drawing.

All as per Ser item No. 16 above, but for 1st Class teak wood Brackets of size 75x75x25mm of Chair Easy as per drawing.

Chair Wooden Bottom (Drawing No.FD-285/225) Dismantling of unserviceable Rear leg from Chair Wooden Botttom and replacing the same by S & F new rear leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge.

All as per Ser item No.24 above, but front leg of Chair Wooden Botttom as per drawing.

All as per Ser item No.24 above, but bottom side rail of seat of Chair Wooden Botttom as per drawing

All as per Ser item No. 24 above, but for front and rear rail of seat of Chair Wooden Botttom as per drawing.

All as per Ser item No. 24 above, but for stiffner of Chair Wooden Botttom as per drawing.

All as per Ser item No. 24 above, but for back rest of Chair Wooden Botttom as per drawing.

All as per Ser item No. 24 above, but for New commercial plywood top of 6mm thick of BWR grade quality fixing with screws for seat of Chair Wooden Botttom as per drawing.

All as per Ser item No. 24 above, but for 1st Class teak wood Brackets of size 75x75x25mm of Chair Wooden Botttom as per drawing.

Stool Dressing (Drawing No.FD-252/282/27) Dismantling of unserviceable leg of Stool Dressing and replacing the same by S & F new leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge.

All as per Ser item No.32 above, but for top front rail of stool dressing as per drawing.

All as per Ser item No.32 above, but for top side rail of stool dressing as per drawing.

All as per Ser item No.32 above, but for side/centre stiffner of stool dressing as per drawing.

Bin Soiled Linen (Drawing No.FD-212/244) Dismantling of unserviceable leg of frame of Bin Soiled Linen and replacing the same by S & F new leg made of first class hard wood (teak), all the joints to be fixed with bamboo pins, wooden screws as required. On compleion of repir the replaced member to be French polished with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete all as per drawing, as specified and directed by Engr-in-Charge.

All as per Ser item No.36 above, but for front rail of frame of Bin Soiled Linen as per drawing.

All as per Ser item No.36 above, but for side rail of frame of Bin Soiled Linen as per drawing.

All as per Ser item No.36 above but for removing of U/S one side teak face plywood for Top/ Bottom of Bin Soiled Linen and S&F the new 6mm thick one side teak face plywood BWR grade to be fixed with screws as per drawing .

Removing unserviceable PVC Hard rubber shoes and S&F new Hard PVC / Rubber shoes for all type of all wooden Chairs with proper wooden screws all as directed by Engr-in- Charge and as specified in the drawing.

Chair Dinning / CBB / Writing / Chair Easy / Chair wooden bottom / Bin Soiled Linen and stool dressing CB (Drawing No. FD-16/203/270/279/20/250/280/202/17 /201/ 229/285/225, DB-3970, DB-4124) Removing U/S broken beading for seat frame and S&F new teak wood beading 25x25mm with 6mm, 50mm long nut and bolts 02 Nos, including drilling holes @ 12.5mm C/C complete all as directed and shown in drawing for all the Chair Dinning/CBB / Writing/ Chair Easy and stool dressing CB.

Chair Dining/ Chair CBB (Drawing No. FD - 16/203/228/262/279/ DB-3970) Removing of Unserviceable old cane plastic of chair dining/chair CBB, clearing the cane holes and M&L for Re canning with 1.80mmx0.46mm cane and border with 3mm x 0.6mm plastic cane with Godrej Pattern as per particular Specification, shown on drawing and as directed by Engr-in-Charge. Cane plastic shall be super fine quality of colour white. Make of cane shall be Maharastra Plastic Industries / Mar Cane .

Chair Writing (Drawing No.FD-20/250/280/202) All as per Ser item No. 42 above, but for Chair Writing as per drawing.

Chair Easy (Drawing No.FD-17/201/229) All as per Ser item No. 42 above, but for Chair easy (Seat & back) as per drawing.

Stool dressing CB (Drawing No.FD-252/282/27) All as per Ser item No. 42 above, but for Stool dressing CB as per drawing.

Bin Soiled Linen (Drawing No.FD-212/244) All as per Ser item No. 42 above, but for Bin Soiled Linen as per drawing.

SOFA SET 5/4 SEATER (Drawing No. FD-281/373) Removing the existing unserviceable cushion and S & F new synthetic foam cushion of 40 density 100mm thick of size 21" x 22"covered with tapestry cloth of approved quality as per drawing and as directed by Engineer-in-Charge. Tapestry Cloth should be of approved quality of cost not less than Rs. 250.00 per mtr. Make of cushion : Sleep well/Kurlon

SOFA SET 5/4 SEATER (Drawing No. FD-281/373) Removing the existing broken unserviceable Stiffners for seat and back of Sofa sets and S&F new Ist class hard wood (teak wood) stiffners for seat and back similar to those replaced and proper fixing with bamboo pins & screw as applicable including polishing of replaced member with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete as shown in drawing & as specified, directed by Engr-in-Charge.

All as per Ser item No.48 above, but for front/rear leg of sofa set as per drawing.

All as per Ser item No.48 above, but for front rail of 3 seater as per drawing.

All as per Ser item No.48 above, but for arms of sofa as per drawing.

SOFA SET 5/4 SEATER (Drawing No. FD-281/373) Removing the existing unserviceable tapestry cloth on cushion and S&F new tapestry cloth of approved quality as per drawing a7 as directed by Engr-in-charge. cloth shall be of approved quality and cost not less than 250.00 per mtr.

SOFA SETS OF 5 SEAT (Drawing No. FD-258) Removing the existing broken unserviceable front leg of Sofa sets and S&F new Ist class hard wood (teak wood) front leg similar to those replaced and proper fixing with bamboo pins & screw as applicable including polishing of replaced member with 2 coats of French polish to match with the original colour of the item after filling the cracks, joints & uneven surfaces with wax complete as shown in drawing & as specified, directed by Engr-in-Charge.

All as per Ser item No.53 above, but for front rail of 3 seater as per drawing.

All as per Ser item No.53 above, but for arms of sofa as per drawing.

SOFA SETS OF 5 SEAT (Drawing No. FD-258) Removing broken unserviceable plywood of seat (single seat) and S&F new 12mm thick plywood for seat fixing with screws as applicable all as shown in drawing and as directed by Engineer-in-Charge.

SOFA SETS OF 5 SEAT (Drawing No. FD-258) Removing broken unserviceable plywood of seat (Three Seater) and S&F new 12mm thick plywood for seat fixing with screws as applicable all as shown in drawing and as directed by Engineer-in-Charge.

SOFA SETS OF 5 SEAT (Drawing No. FD-258) Removing the existing unserviceable cushion of seat and back of complete set and S&F new synthetic foam cushion of 40 density 100mm thick of size 21"x22" for each seat stitched with new tapestry cloth and foam cushion made of 40 density 75mm thick for back stitched with tapestry cloth cover as per drawing and as directed by Engineer-in-Charge. Cloth should be of approved quality of cost not less than Rs.250.00 per mtr. Make of cushion : Sleep well/Kurlon Note : Seat and back together for complete set of 5 seater shall be measured as one unit .

Chair Dining Officers: FD/MAP-II/04 Removing existing unserviceable foam with fabric and unsv plywood seat of Chair dining offrs and S&F new seat made of 75mm thick 40 density foam with fabric of approved quality fixed on 12mm thick BWR plywood of size 450x450mm as shown on drawing and as directed by Engr-in-Charge.

Removing existing unserviceable teak wood stopper fixed between main frame and legs and S&F new 75x75x25mm teak wood stopper between main frame and legs of Chair dining offrs all as shown on drg and as directed by Engr-in-Charge. Drg No.FD/MAP-II/04.

Removing existing unserviceable teak wood vertical strips from back of Chair dining Offrs and S&F new 15x30mm teak wood verticle strips made to shape and of length as shown on drg in back of chair dining Offrs. The replaced member to be French polished after filling the cracks, joints & uneven surfaces with wax & then polish with 2 coats of French polish to match with the original colour of the item as shown in drawing & as specified, directed by Engr-in-Charge.Drg No.FD/MAP-II/04.

All as per ser item No.61 here-in-before, but to front and side rail of size 25x65x450mm. Drg No.FD/MAP-II/04

All as per ser item No.61 here-in-before, but to front leg of size 35x50mm.and of length as specified and shown in drg. Drg No.FD/MAP-II/04

All as per ser item No.61 here-in-before, but to rear leg of size 35x50mm made to shape and of length as specified and shown in drg. Drg No.FD/MAP-II/04

All as per ser item No.61 here-in-before, but to stiffner of size 20x25x450mm.Drg No.FD/MAP-II/04

Preparation of old wooden surfaces of Almirah Large wooden with shelves (Drawing No. DB-4049) direct to vision by scraping with abrasive paper and filling the gaps and joints with BEE WAX, making surfaces smooth and applying two coats of French polish to a glossy finish complete all as directed by Engineer-in- Charge.

All as per Ser item No.66 above, but for Almirah Large wooden with 1/2 Hanging and 1/2 shelves (Drawing No. DB-4049).

All as per Ser item No.66 above, but for Almirah wooden medium with shelves (Drawing No. DB-3959).

All as per Ser item No.66 above, but for Almirah wooden medium 1/2 Hanging and 1/2 shelves (Drawing No. DB-4042).

All as per Ser item No.66 above, but for Almirah Mess Utencils (Drawing No. FD-93).

All as per Ser item No.66 above, but for Chair Dinning Officers (Drawing No. FD/MAP-II-03/04).

All as per Ser item No.66 above, but for Bin Soiled Linen (Drawing No. FD-244/15/212).

All as per Ser item No.66 above, but for Book Case (Drawing No. FD-45/237/DB4071).

All as per Ser item No.66 above, but for Book Shelf open Large (Drawing No. DB-4121).

All as per Ser item No.66 above, but for Desk (Drawing No. FD-107/1021).

All as per Ser item No.66 above, but for Chair Easy (Drawing No. FD-299/201/17).

All as per Ser item No.66 above, but for Chair Wooden Bottom (Drawing No. FD-56/225/285).

All as per Ser item No.66 above, but for Chair CBA (Drawing No. DB-4124).

All as per Ser item No.66 above, but for Chair CBB (Drawing No. DB-3972).

All as per Ser item No.66 above, but for Chair Dining (Drawing No. FD-16/226/279).

All as per Ser item No.66 above, but for Chair Writing (Drawing No. FD-280/261/202/250/20).

All as per Ser item No.66 above, but for Rack 6’ x 2’- 6” (Drawing No. DB-6064).

All as per Ser item No.66 above, but for Teapoy (Drawing No. FD-34/232 /278/383).

All as per Ser item No.66 above, but for Hat Stand (Drawing No. FD-233/23).

All as per Ser item No.66 above, but for Locker Bed Side (Drawing No. FD-54/DB-4064).

All as per Ser item No.66 above, but for Peg Table (Drawing No. FD-277/ 334/236/25).

All as per Ser item No.66 above, but for Side Board (Drawing No. FD-26/241).

All as per Ser item No.66 above, but for Stool Dressing (Drawing No. FD-282/252/27).

All as per Ser item No.66 above, but for Table Bed Side (Drawing No. FD-28/210/248/276).

All as per Ser item No.66 above, but for Sofa Set 4 Seater (Drawing No. FD-258/281/FD/MAP-II/02).

All as per Ser item No.66 above, but for Sofa Set 5 Seater (Drawing No. FD-258/281/FD/MAP-II/02).

All as per Ser item No.66 above, but for Table Centre (Drawing No. FD-274/235/29).

All as per Ser item No.66 above, but for Table Dining 6 Pers (Drawing No. FD-30/239/273).

All as per Ser item No.66 above, but for Table Dining 8 Pers (Drawing No. FD-30/239/273).

All as per Ser item No.66 above, but for Table Dressing Gents with Mirror (Drawing No. FD-31/379).

All as per Ser item No.66 above, but for Table Dressing Ladies with Mirror (Drawing No. FD-32/378).

All as per Ser item No.66 above, but for Table Writing (Drawing No. FD-33/29/275).

All as per Ser item No.66 above, but for Table Centre Two Tier (Drawing No. 48/GOL/TD/ 46/57).

All as per Ser item No.66 above, but for Table Writing ORs Small (Drawing No. F-57).

All as per Ser item No.66 above, but for Table 5’x2’-10” (Drawing No. F1-289).

All as per Ser item No.66 above, but for Table 900x600 Without Drawer (Drawing No. FD-42/223/231/28).

All as per Ser item No.66 above, but for Table 3'x3' (Drawing No. FD-88/291).

All as per Ser item No.66 above, but for Table Office Clerk (Drawing No. DB-4120).

All as per Ser item No.66 above, but for Table 900x600 x760mm Without Drawer (Drawing No. FD-88/291).

All as per Ser item No.66 above, but for Table 900x600 With Drawer (Drawing No. FD-41/244/283).

All as per Ser item No.66 above, but for Table Writing JCOs Med DB 3982.

All as per Ser item No.66 above, but for Table 2’x2’ (600x600mm) (Drawing No. FD-95/293).

All as per Ser item No.66 above, but for Table Writing (Drawing No. DB-3972).

A.K. MARKETING ASSOCIATES

BALAJISTEELINDUSTRIES

Yash enterprises