Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹22.6 L+₹3.6 L (18.7%)Rejected-Finance 441 G F LIG FLATS PH 2 SEC 14 PKT 3 DWARKA NEW DELHI SECTOR 14 DWARKA DWARKA SOUTH WEST DELHI DELHI 110078 | SOUTH WEST DELHI | DELHI | 110078 | L2 | Rejected-Finance NOT BEING L1 | |
| 3 | L3₹26.3 L+₹7.3 L (38.1%)Rejected-Finance RZ 18 260 WEST SAGARPUR NEAR MCD SCHOOL NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L3 | Rejected-Finance NOT BEING L1 |
| Sl No | Description | Qty | Unit | RUCHIKA ENGG.WORKS L1 | P S TRADERS L3 | OMVIN ENTERPRISES LLP L2 |
|---|---|---|---|---|---|---|
| 1.00 | Supply and fix in replacement Ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 360 | Each | 700 ₹2,52,000 Lowest | 1,080 ₹3,88,800 | 950 ₹3,42,000 |
| 2.00 | All as per item Srl No 1 above but CCT 4000K | 180 | Each | 700 ₹1,26,000 Lowest | 1,080 ₹1,94,400 | 950 ₹1,71,000 |
| 3.00 | S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 36 watt, luminaire should have an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement. made of deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office / passage areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 4500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 250 | Each | 800 ₹2,00,000 Lowest | 1,080 ₹2,70,000 | 1,300 ₹3,25,000 |
| 4.00 | S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed. | 60 | Each | 1,140 ₹68,400 | 1,080 ₹64,800 Lowest | 1,450 ₹87,000 |
| 5.00 | Supply and fix in replacement Surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP 40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed | 450 | Each | 190 ₹85,500 Lowest | 380 ₹1,71,000 | 250 ₹1,12,500 |
| 6.00 | All as per item Srl No 5 above but CCT 4000K | 180 | Each | 200 ₹36,000 Lowest | 380 ₹68,400 | 250 ₹45,000 |
| 7.00 | All as per item Srl No 5 above but, 25 W and CCT 6500K | 300 | Each | 200 ₹60,000 | 170 ₹51,000 Lowest | 280 ₹84,000 |
| 8.00 | All as per item Srl No 5 above but, 25 W and CCT 4000K | 100 | Each | 200 ₹20,000 | 170 ₹17,000 Lowest | 300 ₹30,000 |
| 9.00 | All as per item Srl No 5 above but, 10 W and CCT 6500K | 100 | Each | 200 ₹20,000 Lowest | 240 ₹24,000 | 270 ₹27,000 |
| 10.00 | All as per item Srl No 5 above but, 10 W and CCT 4000K | 75 | Each | 200 ₹15,000 Lowest | 240 ₹18,000 | 270 ₹20,250 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
17 Nov 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M RR HOSP. DELHI CANTT-10
GE E/M RR HOSP. DELHI CANTT-10
REPAIR/ MAINT OF INTERNAL E/M SERVICES INCLUDING FITTINGS / FIXTURES AT AHRR UNDER GE E/M RR HOSP. DELHI CANTT-10
2025_MES_737060_1
GE/H/T-66/2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE E/M RR HOSP DELHI CANTT-10
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE E/M RR HOSP
₹50,000
Yes
27 Dec 2025
27 Oct 2025
19 Nov 2025
27 Oct 2025
17 Nov 2025
10 Nov 2025
Amount
Supply and fix in replacement Ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
All as per item Srl No 1 above but CCT 4000K
S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 36 watt, luminaire should have an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement. made of deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office / passage areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 4500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
Supply and fix in replacement Surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP 40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed
All as per item Srl No 5 above but CCT 4000K
All as per item Srl No 5 above but, 25 W and CCT 6500K
All as per item Srl No 5 above but, 25 W and CCT 4000K
All as per item Srl No 5 above but, 10 W and CCT 6500K
All as per item Srl No 5 above but, 10 W and CCT 4000K
S & F in replacement Surface mounted, Microwave Motion Sensor LED light fitting 15 watt, Round Type, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement (auto-dim on inactivity), as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement for 3 min, with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.
All as per item Srl No 11 above but, CCT 4000K
All as per item Srl No 11 above but, 20 W, 6500 K
All as per item Srl No 11 above but, 20 W, 4000 K
S & F in replacement ceiling recessed mounting LED COB Lights, 15 W, with COB LED, flexible to suit for different applications, Aluminium housing for better thermal management. The LEDs used should have CCT 4000K, ≥ 110 lumen / watt, 50,000 burning hrs, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.
Supply and fix in replacement energy efficient wall mounted LED bulk head light fitting 10 / 12 watt, Outdoor IP 65, LED Bulkhead Light, CW 6500K , PF>0.95 and Voltage rated 220V to 240V etc complete all as specified.
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.50 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 0.75 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, twin core, 1.00 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 1.50 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 2.50 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 4.00 sqmm size complete all as specified and directed
Supply and fix in replacement PVC insulated and PVC Round Sheathed, Multicore Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to relevant IS, 3 core, 6.00 sqmm size complete all as specified and directed
Supply and fix in replacement casing capping heavy duty double lock type of size 25 x 12 mm, ISI marked including all fixing accessories complete all as directed.
Supply and fix in replacement, non metallic rigid PVC conduit pipe medium grade 20 mm dia including accessories likes as tees, bends, elbows, reducers, bell mouth, tube ends, saddles, pipe hooks etc all as directed.
Supply and fix in replacement, non metallic rigid PVC conduit pipe medium grade 25 mm dia including accessories likes as tees, bends, elbows, reducers, bell mouth, tube ends, saddles, pipe hooks etc all as directed.
Supply and fix in replacement, capacitor of 2.5 mfd capacity all as directed.
Supply and fix in replacement, capacitor of 3.15 / 4.0 mfd capacity all as directed.
S&F in replacement Switch piano flush type, single pole, one way, 6 Amps complete all as specified and directed.
S&F in replacement socket piano type, two-in-one, 2 & 3 pin, 6 Amp universal type complete all as specified and directed.
S&F in replacement Switch piano type 15 / 16 Amp, single pole, one way type complete all as specified and directed.
S&F in replacement Socket piano type, two-in-one, 15 & 5 Amp, multipurpose shutter type complete all as specified and directed.
S&F in replacement electronic fan regulator, step type and making all necessary connections complete all as specified and directed.
S&F in replacement Bell push switch, single pole, one way, 5/6 Amps complete all as specified and directed.
S&F in replacement Bell Ding-Donk, 240V, AC, complete all as specified and directed.
S&F in replacement Switch socket combination 6 amps, 2-in-1 with PVC box, 240 volts, 50 Hz all as specified and directed.
S&F in replacement Switch socket combination 5 A & 15 A amps, shutter type with PVC box, 240 volts, 50 Hz all as specified and directed.
S&F in replacement Switch socket combination 6 amps, 2-in-1 without PVC box, 240 volts, 50 Hz all as specified and directed. (As per sample / existing on ground)
S&F in replacement Switch socket combination 5 A & 15 A amps, shutter type without PVC box, 240 volts, 50 Hz all as specified and directed. (As per sample / existing on ground)
S&F in replacement 3 Pin Plug Top 5/6 amp complete all as directed.
S&F in replacement 3 Pin Plug Top 15/16 amp complete all as directed.
S&F in replacement 3 Pin Plug Top 25 amp complete all as directed.
S&F in replacement lamp holder PVC/polycarbonate type with back plate suitable for angular/pendant/batten fitting body all as directed.
S&F in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.
S&F in replacement modular switch, single pole, one way, 6 Amps, 01 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular switch, single pole, one way, 16 Amps, 01 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular socket two-in-one, 6 Amp, 5 pin, 02 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular socket, 6 & 16 Amp, multipurpose type 02 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular switch, single pole, two way, 6 Amps, 01 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular Bell push switch, single pole, 6 Amps, 01 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular socket, 10 & 25 Amp, multipurpose type 02 module as per site requirement complete all as directed. (As per sample / existing on ground)
S&F in replacement modular switch, single pole, one way, 25 Amps, 02 module as per site requirement complete all as directed. (As per sample / existing on ground)
Supply and fix in replacement, Service wire twin core, 4.0 sqmm aluminium, complete all as specified
Supply and fix in replacement, Service wire twin core, 6.0 sqmm aluminium, complete all as specified
Supply and fix in replacement, Service wire twin core, 10.0 sqmm aluminium, complete all as specified
OMVIN ENTERPRISES LLP (BID ID -3475713)
P S TRADERS (BID ID -3476586)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.77 MB
TENDERT66.pdf
Tender Documents • 1.27 MB
BOQ_825276.xls
BOQ • 0.37 MB
SOCT66.pdf
Additional Documents • 0.51 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .