REPAIR AND MAINT INCLUDING JOINERY TILING AND PLUMBING AT OFFICERS MD ACCN AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Easing of door shutters for easy closing / opening including tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws, adjusting handles, knobs tightening piano hinges and minor small adjustments complete all as specified and directed.

Taking down shutters of any description and refixing in the same opening, area exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed.

S&F in replacement 15 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F in replacement 20 mm bore GI tubing medium grade, galvanised with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and laying in replacement 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

Supply and laying in replacement 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius in half brick thick walls using modular bricks built in CM 1:4 including demolition of old brickwork complete all as specified and directed.

M&L for fly ash brick work with modular 'B' bricks, straight or curved on plan to any radius using modular bricks in CM 1:6 including demolition of old brickwork complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work and demolition of old concrete complete all as specified and directed.

M&L for 18-20 mm thick machine cut Kota stone slab flooring & skirting, laid over and including 15 mm thick screed bed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including mirror polishing complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement including making joints 12 mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with bitumen and sand in 1:3 by weight including demolition of existing concrete in ground floors complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in sub bases, floors and paving complete all as specified and directed.

M&L for 15 mm thick screed bed or beding layer of CM 1:6, finished even and rough for laying floor finish complete all as specifed and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface back coat to receive walll tile in CM 1:4 complete all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/ rectangular) polished, of any shade, area of each tile exc 0.18 sqm but not exceeding 0.36 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for vitrified glazed light shade tiles 8 to 10 mm thick (square/ rectangular) polished, of any shade, area of each tile exc 0.18 sqm but not exceeding 0.36 Sqm on vertical surfaces such as skirting, risers to steps, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tilesincluding dismantling of old tiles complete all as specified and directed.

M&L for vitrified glazed light shade tiles 10 mm thick (square/ rectangular) double charged polished of any shade, area of each tile exc 0.42 sqm but not exceeding 1.00 Sqm as in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for vitrified glazed light shade tiles 10 mm thick (square/ rectangular) double charged polished of any shade, area of each tile exc 0.42 sqm but not exceeding 1.00 Sqm on vertical surfaces such as skirting, risers to steps, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors etc: set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 sqm on vertical surfaces such as skirting, risers to steps, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as skirting, risers to steps, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for 15-18 mm thick granite stone tiles on vertical surface such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including rendering 15 mm thick back coat in CM 1:4 complete all as specified and directed.

M&L for 8 to 10 mm thick Endura joint free coloured tiles (square/ rectangular) area of each tiles not exceeding 0.18 sqm as in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles including dismantling of old tiles complete all as specified and directed.

M&L for 8 to 10 mm thick Endura joint free coloured tiles (square/ rectangular) area of each tiles not exceeding 0.18 sqm as in vertical surfaces such as skirting, risers to steps, etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including dismantling of old tiles complete all as specified and directed.

S&F in replacement 8 mm thick laminated wooden flooring of make: Action Tesa or equivalent including polishing complete all as per manufacturers instructions complete all as specified and directed.

S&F in replacement powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc and fixing in opening complete all as specified and directed.

S&F in replacement 4.0 mm thick plain sheet glass ordinary quality n exc 0.50 Sqm in each pane with oil putty/ beads complete all as specified and directed.

S&F in replacement 4.0 mm thick plain sheet glass ordinary quality exc 0.50 Sqm in each pane with oil putty/ beads complete all as specified and directed.

S&F in replacement 10 to 12 mm thick toughfen glass as in doors, partitions and similar work with stainless steel handle, hinges, locking arrangement etc of approved shape and design complete all as specified and directed.

S&F of solar control film 25 micron, reflective type and sticked to glass panes as per manufacturer instructions complete all as specified and directed.

S&F in replacement 105 x 60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.

S&F in replacement 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. complete as specified and directed.

S&F in replacement factory made gauged panel PVC door shutter 30 mm thick consisting of frame made out of M.S. tube for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2mm width stuck inside with solvent cement for stiles and plain colur PVC sheet for top rails ,lock rail & bottom rail, panel will be of wire gauze in lieu of PVC sheet panel and the wire gauze shall be wrapped on an additional square 8 mm MS solid tube and shall be stretched to tighten firmly complete as specified and directed.

S&F in replacement machine moulded and factory made 30 mm thick flush shutters, solid core construction, with block board core and ply wood face panels with decorative laminate type 1 on both sides and fixed to chowkats complete all as specified and directed.

S&F in replacement solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 100 mm, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as specified and directed.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size 65 x 125 mm, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as specified and directed.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thickness, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic dditives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as specified and directed.

S&F in replacement factory made single extruded WPC (Wood Polymer Composite) solid plain glazed shutter door of 30 mm thickness, open rebated and prepared to receive gauze, etc. (without sash bars) edge of framing plain, chamfered or rounded, etc; size of members of shutters comprising of virgin polymer of K value 58-60 (Suspension Grade) calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw with drawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete as specified and directed. Note: Wiremesh shall be measured and paid separetely.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete as specified and directed.

S&F in repairs aluminium (extruded section body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters upto 700 mm in width and of weight not more than 35 kg and fixed complete as specified and directed.

S&F Butt hinges 100mm , extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F of 100 mm long butt hinges, medium weight, cold rolled mild steel and fixedwith screws complete as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters with screws complete all as specified and directed.

S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed with screws complete all as specified and directed.

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to frames complete as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to frames complete as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repairs 300 mm long ordinary MS rat tail, rod pattern, springs including roller and roller plate complete all as specified and directed.

S&F in repairs 25 mm stainless steel drepary curtain rod, decorative type incl curtain fancy type bracket & knobs complete all as specified and directed.

S&F of GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylong sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kuled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including dismantling of old ceiling boards of any description fixed in any position, any thickness including cover fillets complete as specified and directed.

S&F of 12mm Gypsum board ceiling fixed with GI angle/ channel frame work incl GI wire/ mesh, etc; in different levels including joints filled with paster of paris, putty including POP work/cornices and applying two coat of oil bound distemper complete as specified and directed.

S&F of galvanised cold rolled steel section framed work of size 600 x 600 mm grid size, 24 x 38 x 0.60 mm Tee (bottom precoated) and 24 x 24 x 0.50 mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling including dismantling of old ceiling boards of any description fixed in any position, any thickness including cover fillets complete as specified and directed. (Make : Gabson or equivalent as approved by GE)

S&F of 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x 600 mm grid complete all as specified and directed. Note: Frame work for ceiling shall be measured and paid separately.

S&F in repairs solid PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet and jointed with solvent cement and fixing at site on PVC frame as per specifications and drawing complete as specified and directed.

S&F in repairs 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing to wall to make PVC Frame as per specification and drawing complete as specified and directed.

S&F in repairs PVC pin hole sandwich wall lining consisting of 5 mm thick wood grain printed PVC sheet fixed with solvent cement at site on PVC frame as per specification complete all as specified and directed.

S&F of 40 mm wide flap continuous (piano) hinges, brass, bright finish and fixed with screws complete as specified and directed.

S&F in repairs 18/19 mm thick prelaminated partcle board, exterior grade, prelaminated both side with decorative choice lamination fixed with nails to aluminium frame work complete as specified and directed.

S&F of 100 mm long stainless steel handle, cast type, polished bright and fixed complete all as specified and directed.

S&F in repairs 18 mm thick plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F in repairs 0.9 mm thick decorative laminate type 1, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F for hydraulic soft close auto hinges, thickness 1-1.5 mm, size 8 Inchs of 90 degree opening angle silver colour and fixed with screws to cupboard and similar work complete all as specified and directed.

S&F in repairs 40 mm long magnetic catcher for cupboard shutter and fixed with screws complete all as specified and directed.

S&F of kitchen baskets of 100 % stainless steel, non-magnatic, multi layer chrome plated, argon welded, double sealed ball bearing mechanism, kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case, depth of 558 mm and height 100mm complete all as specified and directed.

S&F of kitchen baskets of 100 % stainless steel, non-magnatic, multi layer chrome plated, argon welded, double sealed ball bearing mechanism, kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case, depth of 558 mm and height 150mm complete all as specified and directed.

S&F of kitchen baskets of 100 % stainless steel, non-magnatic, multi layer chrome plated, argon welded, double sealed ball bearing mechanism, kitchen capable of holding plates, cup, saucers, bowls and dongas with 500 mm car case, depth of 558 mm and height 200mm complete all as specified and directed.

S&F of vitreous China wash basin vanity of size 820 x 450 mm, white including CP waste coupling 32 mm bore, PVC waste pipe complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old cement plaster complete as specified and directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement including taking down old cement plaster complete as specified and directed.

M&L for 5 mm thick rendering in CM 1:3 on fair faces of brick/ concrete surfaces as in ceiling finished even and smooth without using extra cement including taking down old cement plaster complete as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of oil emulsion distemper over and incl a coat of 1 mm thick white cement based putty complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of exterior weather proof water base emulsion paint over and incl a coat of 1 mm thick white cement based putty complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for complete removal of old decorated surface of walls and applying two coats of oil emulsion distemper (white/tinted) over and incl a coat of 1 mm thick white cement based putty complete all as specified and directed.

M&L for complete removal of old decorated surface of ceiling and applying two coats of oil emulsion distemper (white/tinted) over and incl a coat of 1 mm thick white cement based putty complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil emulsion distemper complet all as specified and directed.

M&L for preparation of old painted surfaces of wood/wood based materials of any description, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete as specified and directed.

M&L for preparation of old painted surfaces of steel / iron materials of any description, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of exterior weather proof water base emulsion paint on wall complete all as specified and directed.

M&L for complete removal of old decorated surface of walls and applying two coats of exterior weather proof water base emulsion paint over and incl a coat of 1 mm thick white cement based putty complete all as specified and directed.

S&F in replacement vitrious china wash hand basin counter top of size 440 x 440 x 135 or 420 x 345 x 170 mm (rectangular/oval shape) and fixed complete all as specified and directed.

S&F in replacement casket type wash down water closet with seat cover, waste pipe, cistern, lid & fittings (complete set) and fixed complete as specified and directed.

S&F in replacement SS towel rack 600 mm long with lower hangers and fixed with screws complete all as specifed and directed.

S&F in replacement vitreous china WC squatting pan "Orissa Pattern" of size 580 x 440mm white with integral foot rests with and including provn of cement concrete bedding and 'P' or 'S' trap as required including connection to trap and to flush pipe, anti syphonage pipe, etc. and making good to floor complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with and including white plastic seat cover with aluminium hinging device complete all as specified and directed.

S&F in repairs syphonic action type PVC low level flushing cistern 10 ltrs capacity with 32mm dia flush pipe and fixing to supply pipe including PVC connection 600 mm long 15 mm bore with brass heads & washers and fixed complete all as specified and directed.

S&F in replacement vitreous china wash hand basin, white, flat back of size 550 x 400 mm excluding tap but including brackets, CP brass 32mm waste coupling and PVC waste pipe complete all as specified and directed.

S&F in replacement stainless steel sink, 1.00 mm thick for kitchen, with plug, washers and wastes/coupling including bedding in cement mortar on to dwarf wall or fixing on cantilever brackets and connecting union to pipe, overall size 495 x 420 mm and bowl size 410 x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs stainless steel plate rack, complete assembeled set of Size 31 x 36 x 10 inch and fixed with screws to walls complete all as specified and directed.

S&F in repairs stainless steel plate rack, complete assembeled set of Size 24 x 30 x 10 inch and fixed with screws to walls complete all as specified and directed.

S&F in repairs 15 mm bore angle stop valves, cast copper alloy, chromium plated, fancy type with long shank and cup and capstan head, screwed down, screwed for iron pipe or union complete as specified and directed.

S&F in repairs 15 mm bore bib taps (Min wt - 0.40 Kg), cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferulle and fixed complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps (Min wt - 0.960 Kg), cast copper alloy with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore hand wash basin mixture, centre hole for mixing hot & cold water, fancy type, cast copper alloy, chromium plated with capstan head, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specfied and directed.

S&F in repairs ABS body CP health faucet of pipe length 1.2 m suitable for 15mm bore with connecting pieces including fittings and accessories complete all as specified and directed.

S&F in repairs chromium plated overhead square shower rose 125 x 125 mm size with or without swivel joints, with shower arms including fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs 15 mm bore wall mixture with provision for bath telephone shower and overhead shower, fancy type, cast copper alloy, chromium plated with capstan head, screwed down high pressure, screwed for iron pipe etc and fixed complete all as specfied and directed.

S&F in repairs 15 mm bore bib cock two way with flange, cast copper alloy, fancy type, chromium plated with capstan head, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore angle valve, two way with flange, cast copper alloy, fancy type, chromium plated with capstan head, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs hydraulic plastic water closet seat cover, any colour, slow motion/ soft closure complete all as specified and directed.

S&F in repairs plastic water closet seat cover, any colour, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repairs tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F in repairs chromium plated glass shelf (with bracket) 8 mm thickness, 22 inch long and fixed complete all as specified and directed.

S&F in repairs corner glass shelf with SS brackets of 8 mm thickness & 8 inch long complete all as specified and directed.

S&F in repairs stainless steel toilet paper holder with flap and fixed complete all as specified and directed.

S&F in repairs soap dish holder of cromium plated bottom and glass holder for soap complete all as specified and directed.

S&F in repairs CP towel ring round with round flange 60 cm long and fixed complete all as specified and directed.

S&F in replacement Pre-painted galvatume aluminium Zinc coating GI based corrugated steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa (AZ-150) as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F in replacement Pre-painted galvatume aluminium Zinc coating GI based plain steel sheet of 0.50mm thick of any colour having tensile strength of 550Mpa (AZ-150) as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F in replacement 3-4 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side laps fixed with L type or J type or cranked hook bolts complete all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering,doors, etc to be prepared for hanging or sliding with and including either hooks and hingsor steel hanging door fittings (including of steel sheeting or other covering.(Fe-410-W(Gde-E250) including dismantling of old structural steel work including doors, gates etc. complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe. 290. Gde-E-165 complete all as specified and directed.

M&L for mild steel work as in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to IS:1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for mild steel work as in bands, straps, clamps, hold fasts, wall ties, hooks for hanging fans and smilar articles complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches/floors complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointed with solvent cement complete all as specified and directed.

S&F of 75 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F of 110 mm bore PVC (SWR) vent cowl and fixed complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repairs 110 mm bore PVC (SWR) bends of any radius and jointed with solvent cement complete all as specified and directed.

M&L for grinding and mirror polishing to kota/ marble/ terazoo/ mosaic flooring complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 500 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks, 3 layers (cylindrical vertical with closed top) of capacity 1000 litres, hoisted including all fittings as required and fixed in position complete all as specified and directed.

S&F in repairs 20 mm dia ball valve, PTMT, high pressure with polythene float and fly nut, screwed for iron pipe with epoxy coated aluminium rod and fixed complete all as specified and directed.

M&L for providing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc; including welding, grinding, buffing, polishing and making curvature (where ever required) and fittings and fixed with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of floor or the side of waist slab with suitable arrangement including dismantling old SS/ iron work complete all as specified and directed.

Taking down existing old roof treatment of any description, any type including removal old tar felt, screed bed and plastering etc. complete with and including M&L for preparing RCC roof surfaces with wire brush, drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (total weight of the finished membrane not less than 3.8 kg/ sqm ± 5 % per sqm) confirming to IS 16532: 2017 over a coat of bituminous primer 85/25 @ 1.2 kg/sqm of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using butane torch and sealing all joints, overlapping etc. as per Annex D of IS 16532: 2017 complete all as specified and directed.

M&L for carrying ponding test by filling 75 mm deep water over roof treatment by making necessary arrangement to fill the roof slab at least for 72 hrs complete all as specified and directed.

M&L for cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in benching/ angle filleting at the junction of parapet and RCC roof complete all as specified and directed.

M&L for cutting grooves or chasing in brick wall, 75 mm wide and 65 mm deep with and including filling with cement mortar 1:4 mixed with water proofing compound as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 over RCC slab mixed with water proofing compound @ 3% by weight of cement or as per manufacturer instruction complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately as supply only.

M&L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding, finished even and fair including demolition of old PCC complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately as supply only.

M&L for grouting for permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/ seepage with pressure grouting with 15 mm bore GI pipe nozzle under the pressure of 5 kg/sqcm using cement based grouting materials, treatment to be done as per manufacturer instructions complete all as specified and directed.

M&L for preparation of old existing roof surface by washing, rubbing down, removing oil grease and vegetation etc. and applying ready made branded chemical treatment of approved manufacturer to roof/ exterior wall/ parapet wall/ chhajja and any other position as per site requirement in following steps:-

Step-1: Opening of sealed container and dilute the chemical with water in ratio 1:3 using mechanical mixer to prepare primer and applying one coat of primer using roller and allow 4-6 hrs to dry treatment.

Step-2: Applying two coats of approved chemical roof treatment with roller to primed surface as per manufacturer instructions and allow for 4-6 hrs to dry treatment.

Notes:- (i) Removal of old roof treatment work and plastering to floor/ wall surface will be measured and paid separetely under respective item. (ii) Work shall be got executed only from approved OEM of Make: Asian Smart care Damp Proof/ Berger weather coat Roof Guard/ Nerolac Perma No Damp.

M&L for preparing and applying Dr. Fixit rain coat or equivalent make as approved on wall/ceiling in following steps as appended below:-

Step-1: Existing substrates shall be cleaned and removed all scale dirt, algea moss, fungal growth with high pressure water using high pressure jet washer. All loose plaster will be repaired with polymer modified mortar using Dr. Fixit pidicrete URP and norrow cracks upto upto 5 mm shall be repaired with crack X-paste and the larger cracks upto 10 mm with Dr Fixit crack-X shrink free. The surface shall be made dry completely for upto 4-6 days for application of primer.

Step-2: Applying one coat primer Dr Fixit primeseal diluted with 2:1 with water (primeseal water) mainting spreading rate @ 8 to 10 Sqm/ltr as directed.

Step-3: Applying two coats of Dr fixit raincoat, first coat without dilution for coverage 3.5 Sqm/ltr and applying second coat without any dilution for coverage 7 sqm/ltr complete as directed. Note: Second coat must be applied after lapse of 6 to 8 hours application of first coat.

M&L for machine pressed precast concrete interlocking paver block (reflective type) any shape and size with grey cement and pigment conforming to IS:15658-2006 of 60mm thickness, M-35 grade over and including 50mm sand cushioning layed in floors or paving etc spread, levelled and rammed including watering including dismantling of old blocks complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundation, sub base etc. complete all as specified and directed.

S&F in replacement half stall vitreous china urinal, white colour of size 710 x 480 x 300 mm, Ist quality with sensotrinic sensor flushing valve with complete kit including CP waste coupling and PVC waste pipe upto floor level (complete set) complete all as specified and directed.

S&F in repairs/ changing sensor of flushing valve with complete kit of half stall vitreous china urinal/ sensor type urinal complete all as specified and directed.

S&F in repairs vitreous china urinal half stall type, white, with CP union for discharge pipe, PVC waste pipe and CP urinal spreader for 15mm dia pipe complete all as specified and directed.

S&F in repairs 100 mm stainless steel handle, cast type, polished bright and fixed complete all as specified and directed.

S&F in repairs 100 mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs 100 mm long extruded aluminum anodised handles, fabricated type and fixed complete all as specified and directed.

S&F in repairs 150 mm long extruded aluminum anodised handles, fabricated type and fixed complete all as specified and directed.

S&F in repairs 150 mm long mild steel pressed handles, oval type, stove enamelled black and fixed complete all as specified and directed.

S&F in repairs 125 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F in repairs 125 mm long mild steel barrel tower bolts, stove enamelled black with bright bolt and fixed complete all as specified and directed.

S&F in repairs 200 mm long mild steel barrel tower bolts, stove enamelled black with bright bolt and fixed complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded type, plate type and fixed complete all as specified and directed.

S&F in repairs 200 mm long aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded type, plate type and fixed complete all as specified and directed.

S&F in repairs 250 mm long aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded type, plate type and fixed complete all as specified and directed.

S&F in repairs 100 mm long aluminium anodised hasp & staple type incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 150 mm long aluminium anodised hasp & staple type incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs brass chromium plated overhead shower rose 125 mm size with swivel joints and fixing to steel pipe or union of 15 mm bore complete all as specified and directed.

S&F in repairs 100 mm long mild steel hasp & staple type incl bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 140 mm long aluminium anodised floor door stopper with hard drawn steel spring and fixed complete all as specified and directed.

S&F in repairs 75 mm size butt hinges, medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs 100 mm size butt hinges with galvanised MS hinge pin, aluminium anodised extruded, B-21 type and fixed complete all as specified and directed.

S&F in repairs 40 mm dia mild steel polished cup board knobs with nut, screw & washer complete all as specified and directed.

S&F in repairs of PTMT waste coupling, 32 mm dia, half or full thread and fixed complete all as specified and directed.

S&F in repairs PVC waste pipe 900 mm long of 32 mm dia and fixed complete all as specified and directed.

S&F in repairs brass spindle suitable for bib cock of 15 mm bore complete all as specified and directed.

S&F in repairs 125 mm dia stainless steel grating with or without hole complete all as specified and directed.

S&F in repairs 15 mm bore gun-metal gate valve with iron wheel, screwed both ends and fixed complete all as specified and directed.

S&F in repairs 15 mm bore gun-metal gate valve with iron wheel, screwed both ends and fixed complete all as specified and directed.

S&F for continuous (piano) hinges, mild steel bright finish in electro galvanized with 30 mm width of flat (when open) and fixed with screws complete all as specified and directed.

S&F in repairs mild steel safety lever locks, 4 levers suitable for rolling shutters complete all as specified and directed.

S&F in repairs ball bearing suitable for rolling shutters complete all as specified and directed.

M&L for running welding in repairs, thickness of metal to be welded not exc 6 mm complete all as specified and directed.

M&L for welding in repairs n. exc 2.5 cm in length and thickness of metal to be welded n exc 6 mm complete all as specified and directed.

Deduct Schedule of credit (calculation will be done off line) Rs. 64495.00

Raj Contruction (BID ID -3444971)

Makewell Enterprises (BID ID -3444507)

SHIV SHANKAR MISHRA (BID ID -3445051)