GE/U(N)-39/2024-25

Amount

Demolition of cement concrete (Unreinforced) ground floor n.exc 15 cm thickness at any situation all as per specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, structural steel frame , etc all as specified.

Demolition of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1.6 complete all as per specified.

S/F in repair 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber /GI/ Aluminium grid/ framework with screws all as specified & directed by Engr-in-Charge.

S/F Anodised aluminium snap grid frame work for false ceiling all as specified & directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridges, all as per specified and directed.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified.

S&F in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as per specified .

Dismantling of wrought iron or mild steel dia work of any description complete all as per specified and directed by Engr-in-Charge.

S&F in repair Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conf to IS 1161-1998 grade St-240 all as per specified and directed by Engr-in-Charge.

S&F in repair Roof trusses (framed) trusses purlins cranes / gantries , rails & festering & heavy bracket cleats (including distanence pleus cuats etc) Fe-410W (Gde-E-250 quality-A) complete all as per specified and directed by Engr-in-Charge.

S&F PCC 1:4:8 type D-2 as in floors 75mm thick complete all as specified and dir by Engr-in-Charge.

M&L for Machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over 50 mm thick sand cushion all as specified.

Hacking out old broken glass any thickness size quality from wooden frame or steel glazed with putty or fixed with beads complete all as perspecified and directed by Engr-in-Charge.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares in not exc 0.5 sq.m in each pane complete all as specified.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified.

S&F galvanized mild steel wire cloth 0.56mm normal dia of wire and average width of apparatus 1.18mm and fixed width tinned lacks of galvanized wire staple complete all as per specified.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified.

All as per item above but exceeding 1.5 Sqm and not exc 4 Sqm each complete all as per specified and directed by Engr-in-Charge.

Taking down shutters of any description n. exc 1 sqm each complete all as per specified and directed by Engr-in-Charge.

Ditto as above but exc 1 sqm and n. exc 2 sqm each complete all as per specified and directed by Engr-in-Charge.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified.

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm, complete all as specified

M&L for factory made, 2nd class hard wood rail and style 35 mm thick, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

All as per item above but glazed and skeleton shutter with sash bar for glass / wire gauge. all as specified & directed by Engr-in-Charge.

S/F with Wood free EPS Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2,4,6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face & Fixing in frame at site as per specified and directed by Engr-in-Charge.

Providing and fixing 30mm thick factory made PVC flush door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing. (Make rajshree)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specified and directed by Engr-in-Charge.

S&F mild steel cold rolled butt hinges medium weight 100mm long complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolts stove enameled black with bright both 150 mm long complete all as per specified and Engr-in-Charge.

S&F Aluminium handle cost type 150mm long oval type stove enameled black complete all as per specified and Engr-in-Charge.

M&L for easing of old existing windows/doors/ventilators(i.e. opening and closing of windows) including providing projecting hinges , handles ,tower bolt, etc where required all as specified and directed by Engr In Charge.

M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified & directed by Engr-in-Charge.

Steel windows or ventilators, fixed type, with glazing bars, including a shop coat red oxide of zinc chrome primer, all as specified.

Supply and fixing factory made steel windows (Box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Supply and fixing factory made steel windows (Box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, fixed as in repairs, complete all as specified & shown in drawings, complete all as specified & directed by Engr-in-Charge.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or FE 310-0 all as per specified.

M&L for 2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each complete all as specified.

M&L for preparation of new wooden surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

Preparation of old wooden painted surfaces as exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as per specified.

S&F mild steel barrel tower bolts, stove enameled black, with bright bolt 200 mm long complete all as per specified.

S&F mild steel pressed steel handle, oval type, stove enameled black 150 mm long complete all as specified.

S&F mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete

Taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc. complete all as per specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and smooth mixed with water proofing compound complete all as per specified and directed by Engr-in-Charge.

Supply only integral water proofing compound complete all as per specified and directed by Engr-in-Charge.

M&L for 10 mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement. Complete all as per specified.

M&L for rendering 5 mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement .complete all as per specified.

M&L PCC 1:5:10 type E2 (40mm graded stone aggregate) in mass concrete for lean concrete of WC/ Bath complete all as per specified and directed by Engr-in-Charge.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and smooth with using extra cement complete all as specified.

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, all as specified.

Non skid coloured glazed ceramic tiles area of each tile exc. .11 sqm but n.exc. .18 sqm 7mm to 8mm mm thick as in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match ,including screed bed 15mm thick of CM 1:4 all as specified .

M&L for vitrified ceramic tiles any colour 10mm thick(Square or rectangular) polished, area of each tile not exceeding 0.36 sqm in floor etc,Set and jointed in neat cement slurry and pointed in coloured cement to match including screed bed 15mm thick of CM 1:4 all as per specified & directed by Engr-in-Charge.

S&F Glazed ceramic tiles (coloured) on vertical surfaces 450x300x6 to 7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick cement plaster on fair face of brick work in cement mortar 1:4 as in backing coat for wall tile complete all as per specified and directed by Engr-in-Charge.

S&F in repairs Vitreous china water closet (Squatting Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back with integral foot with pipe (excluding flushing cistern and flush pipe) complete all as per spd and dir by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan `P` or `S` trap ( pedestal pattern ) white including fixing bolts, including connection to drain pipe ( or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as per specified and directed by Engr-in-Charge.

S&F in repair 10 Ltr PVC valve less symphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polyethylene ball valve, float and handle of low or high density and 15mm PVC connection 450mm long complete all as per specified and directed by Engr-in-Charge.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store any dia complete all as per specified and directed by Engr-in-Charge.

S&F Tubes medium grade 15mm bore galvanised with all fittings and fixed to wall or ceiling and floor etc complete all as per specified and directed by Engr-in-Charge.

S&F Tubes medium grade 20mm bore galvanised with all fittings and fixed to wall or ceiling and floor complete all as per specified and directed by Engr-in-Charge.

Refixing old steel tubing and connection in new or old position (wall, Ceiling, Floor, etc.) 15mm bore complete all as per specified.

All as per srl item No 66 above but 20 mm bore pipe complete all as per specified and directed by Engr-in-Charge.

S&F in repair 15mm bib taps cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed for iron pipe fixed in repair complete all as per specified and dir by Engr-in-Charge.

S&F in repair 15mm stop valves, cast copper alloy with crutch or butterfly handle screwed down high pressure screwed for iron pipe fixed in repairs complete all as per specified and directed by Engr-in-Charge.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 500 Ltr including dismantling of existing tank and removed from site complete all as per specified.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, capacity of water tank 1000 Ltr including dismantling of existing water tank and removed from site complete all as per specified .

S&F in repair for ball brass valves, 15 mm bore high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for the following bore complete all as specified and directed.

S&F in repair for ball brass valves, 20 mm bore high pressure with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule for the following bore complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10cms width or girth and applying two coats of synthetic enamel paint over preprimered surface complete all as specified & directed by Engr-in-Charge.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting all as specified.

S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring, joints, fixed to walls in repairs 110mm bore complete all as per specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bends in any radius 110mm bore in repairs complete all as spd and directed by Engr-in-Charge.

S&F in repair PVC (SWR)pipes single socketed in any length with rubber rings, joints fixed to walls 75mm bore in repairs complete all as per specified and directed by Engr-in-Charge.

S&F in repair PVC (SWR) bends in any radius 75mm bore in repairs complete all as per specified and dir by Engr-in-Charge.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm bore in repairs complete all as per specified .

M&L Preparation of old decorated surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply one coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge.

Prep of new decorated surfaces and applying two coats of Distemper oil emulsion on walls over a coat of 1mm wall care putty complete all as specified & directed by Engr-in-Charge.

M&L three coat of white wash on new surface of ceiling all as specified.

M & L two coat of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces complete all as per specified and directed by Engr-in-Charge.

Priming the sunken floor surface with bituminous primer @ 0.7 litres / Sqm and applying a coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm and thereafter supply and laying Polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film followed by another coat of semi hot blown 85 / 25 grade bitumen @ 1.2 Kg / Sqm blinded with fine sand in dry condition @ 0.5 Kg / Sqm, complete all as specified and as directed.

Cutting chases, pinning in, making good to facing in bricks wall where required and pointing in cement mortar 1:3 to concealed water tubing/stone slab n. exc 10cm girth complete all as per specified and directed by Engr-in-Charge.

S&F in repair Wash hand basin vitreous china white flat back size 580 x 450 mm including waste pipe, pillar cock 15 mm waste chain and plug and porcelain stopper and brackets fixed in repairs including 15 mm PVC connection 450 mm long in repairs complete all as per specified.

M&L 18/19mm thick prelaminated particle board medium density flat pressed single layer type or three layer type with BWR type adhesive. complete all as specified & directed by Engr-in-Charge.

Flush shutters, 25 mm thick ,solid core construction, with block board core and plywood face panels, commercial type on both sides, including beading all as specified.

S&F Aluminium Hasp staples of 100mm long complete all as per specified and directed by Engr-in-Charge.

S&F in repair Harrison rails , mild steel curtain rails , chromium plated with fixing brackets, stops, stops rollers etc all as specified.

S & F in repair curtain rods 25 mm dia fancy type metal polished and fixing brackets and holders as required all as directed by Engr-in-charge.

Rendering 15mm thick on fair face of brick work or concrete surfaces with CM (1:4) even & smooth w/o using extra cement on roof surface complete all as per specified.

Priming the roof surface with bituminous primer @ 0.3 litres/Sqm and applying a coat of semi hot blown 85/25 grade bitumen @ 1.2 Kg/Sqm and thereafter supply and laying polymeric membrane, five layered, of weight not less than 3 Kg per Sqm with centre layer core of 90 micron high molecular density polyethylene film and bonded completely to the surface with overlap of 10cm (overlap to be thermo fused by flame) followed by another coat of semi hot blown 85/25 grade bitumen @ 0.7 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm including taking down existing membrane sheet incl plastering all as specified and as directed.

Two coats of aluminium paint on roof padding surfaces complete all as specified and as directed.

S&F in repairs plastic water closet seat cover ,white/ black, closed pattern with flats bottom and cover and mild steel chromium plated or aluminium hinging device, of approved make and quality etc complete.

S&F Cast copper alloy, chromium plated hand shower (health faucet) with 8 mm dia, 1.00 meter long flexible tube and wall hook, IN REPAIR, complete.

Chromium plated , water jets to EWC's with flexible pipe, suitable for 15mm bore of pipe and making connections, fixed in repair complete all as specified and directed.

Supply and fixing toilet paper holder of cast copper alloy, chromium plated, fixed as in repair complete all as specified and directed.

S & F in repairs vitreous China bowl urinal flat back size of 465x355x265mm white (minimum) with grating & union for discharge pipe (excluding flushing cistern,)including waste fittings complete all as specified & directed by Engr-in-Charge.

S & F in repairs stainless steel sink 1 mm thick with drain board, rawl plug washers and waste pipe including fixing MS angle iron brackets of size 25mm x 25mm x 4mm thick overall size of sink 915 mm x 460mm bowl size 410mm x 330mm x 160mm all as spd & directed.

S/F Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) all as per specified.

Mortice lock, vertical type, size 100 mm 4 lever complete all as per specified and directed by Engr-in-Charge.

Chromium plated mixing valve, wall mixer 2 in 1 system with provision for both telephone shower and overhead shower complete with wall flange with 1m long bend pipe including three joints to steel pipe or unions complete all as per specified.

S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as per specified.

S& Fixed in repair C P decorative soap dish any type fix to plugs with crumium plated brass screws all as per specified.

S&F fixed in repair Cast copper alloy, chromium plated central hole basin mixer without pop-up system, suitable for 15 mm bore pipe, fixed in repair, with service pipes, complete all as specified and directed by Engineer-in-Charge.

S&F fixed in repair Towel Rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and plastic cleats (Minimum weight 190 gm) in repair, complete all as specified and directed by Engineer-in-Charge.

S&F fixed in repairs PVC bathroom cabinets quality as approved by Engr-in Charge, of size 600mmx400mm with mirror on front door and with one towel rail for hanging towel of MS chromium plated fixed with screw and wooden gutties etc complete all as per specified.

S&F fixed sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified.

S&F 5 mm thick tinted sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exceeding 0.50 Sqm in each pane complete all as specified. complete all as specified & directed by Engr-in-Charge.

S&F Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & directed by Engr-in-Charge.

S/F Aluminium extruded section hydraulically door closer regulated designation no-1 universal type suitable for door shutter up to 700mm in width & of weight not more than 35 kg all as specified & directed by Engr-in-Charge.

S&F Powder coated Anodised aluminium frame for doors/windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed by Engr-in-Charge.

S&F in repair Solid PVC Wall Lining ( Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement & fixing at site on PVC frame as per specification & directed by Engr-in-Charge

Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed in CM 1:4 base and 15-16mm thick and 80mm wide white marble stone border along to wall laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

Machine cut Kota stone slab 20-25mm thick in riser with bull nose, skirting, dado and pillar laid over 15 mm thick cement screed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting, rounding edging, and polishing complete

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed by Engineer in charge

Demolition Stone slabs and tiles laid dry or dry bedded or pointed of any description or thickness in floors, aprons etc complete all as specified and directed by Engineer in charge

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like one piece full in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

S&F in repairs stainless steel multipurpose basket in wooden drawers/partitions for storing rations of various types made of 3 to 4mm dia stainless steel rods, fixed in side partitions etc fixed, complete all as specified for modular kitchen.

S&F in repair stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen, complete all as directed by Engr-in-Charge for modular kitchen.

S&F in repairs telescopic drawer side channel of std size and incl of roller for moving drawer, mild steel bright finish, or electro galvanised, for modular kitchen, complete all as specified for modular kitchen.

S&F continuous piano hinges mild steel, bright finish or electro galvanised with width of flap 30 mm when open.

Taking down carefully the existing Copper/Aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturb surface of walls, floors etc., complete all as specified and directed by Engr -in- charge. Note : (i) Old dismantled wiring and accessories (other than reuse) will be contractors property and credit will be charged against schedule of credit.

Taking down carefully by unscrewing from boards / outlet boxes fittings and fixture such as, LED bulk head fitting, LED tube light fitting etc. for re use at site or carrying to the store (serviceable fitting shall be reuse) all as specified and as directed by engineer in charge.

Taking down Old Serviceable/unserviceable MCB DB any type/size etc after disconnecting (serviceable DBs /MCBs shall be reuse), complete all as specified and directed by engineer in charge.

M&L for Point wiring for One light/fan/bell point controlled by one one-way switch 5 Amp with 1.5 Sqmm single core multi standed copper conductor FRLS insulated and unsheathed heavy duty cable in colour code including continuous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn into and including concealed PVC rigid conduit of not less than 20mm dia and1.5mm wall thickness ISI marked terminated into annealed steel terminal boxes flush to surface including 3.00 mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed by the Engr-in-charge.

M&L for point wiring with 1.5 Sq. mm PVC Insulated unsheathed FRLS multi stranded copper conductor, medium grade ISI marked drwan into and including PVC concealed conduit with all accessories from terminal box to junction of ceiling and wall and rest of circuit conductor wire drwan in to and including surface PVC rigid non metallic conduit for one ceiling fan point controlled by one switch with and also including 1.5 sqmm continuous earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.

M&L for point wring for one light/ceiling fan controlled by one switch with 1.5 sqmm (nominal area) PVC insulated and PVC unsheathed multi stranded copper conductor cable FRLS in and including concealed PVC conduit 20 mm dia medium duty ISI marked, including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point in that board, flush to surface for one light point, fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 sqmm copper conductor cable FRLS connected to common earth dooly complete including cutting, chasing the surface and then making good the same to mach the existing surface and walls complete all as specified and directed. by engineer-in charge.

All as per item No. 06 bove but wire size 2.5 Sqmm to controlled the 3 pin 5 / 16 Amps socket outlet on independent board and including suitable new steel sunken boxes, modular frame and cover plate for fixing of modular switches as per required point providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.

All as per item No. 04 above but for one bell / buzzer point controlled by one push button on the same board with other switch or independent one push button bell switch.

All as per item Srl No. 04 herein before but for 3 pin socket outlet 5 Amp on same board, complete all as specified and directed by Engr -in-charge.

All as per item No. 04 above but for one 5 Amps socket outlet on independent board.

All as per item No. 04 bove but wire size 2.5 Sqmm to controlled the 3 pin 5 / 15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLS 1100 volts grade un sheathed single core stranded copper conductor cable of size 2.5 Sqmm.

All as per item No. 04 above but controle by 2 Nos.of two way switch.

S&F Switch Piano flush type single pole 5 Amps One way, all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14121/ Havells REO Cat No: AHESXXW061

S&F in repair Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F Socket outlet Two in one, 3/5 Pin piano type 10 Amp and 20 Amp flush type complete all as specified and directed by Engineer- in - Charge.Make : Anchor Penta Ordering Code : 39994/ Havells REO Cat No: AHESYXW161

S&F Ceiling rose, 3 terminal, PVC / polycarbonate, isolated body complete all as specified and directed by Engineer - in - Charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F Electric bell (Ding dong) AC 230/250 volts grade single pole ISI marked, complete all as specified and as directed by engineer in charge Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

S&F switch piano flush type for bell Push 5 Amps, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry,Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

Taking down fan, ceiling cable end, dismantling blades and kept in safe custody for refixing on same location all as specified and directed by engineer in charge.

Hanging /fixing only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan obtained from item No 26

S&F in repair Switch Piano flush type/ single pole two way 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Cherry of Ordering Code : 14122/Havells REO Cat No: AHESXXW062

S&F in repair switch piano flush type for bell Push 5 Amps fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Socket outlet Two in one, 3/5 Pin piano type 5 Amp flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 14119/Havells REO Cat No: AHEKSWW063

S&F in repair Switch socket combination piano type 5 pin 5 Amps flush type fixed in replacement, complete all as specified and directed by Engineer-in -Charge. Make : Anchor Penta Ordering Code : 38820/ Havells REO Cat No: AHETOXW062

S&F in repair Switch socket combination piano type 6 pin 16 Amps flush type fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : Anchor Penta Ordering Code : 39998/ Havells REO Cat No: AHETOXW204

S&F in repair Ceiling rose, 3 terminal, PVC / polycarbonate, isolated body fixed in replacement, complete all as specified and directed by Engineer - in - Charge. Make: Anchor Ordering Code : 39072/ Havells REO Cat No: AHEEIXW000

S&F in repair Electronic type fan regulator Stepped type, 240Volt flush type suitable for 1200/1400mm sweep ceiling fan, ISI marked fixed in replacement, complete all as specified and directed by Engineer- in - Charge. Make : ANCHOR Penta Cherry, Ordering Code : 14123/ Havells REO Ordering code : AHEMBKW061

S&F in repair Electric bell(Ding dong) AC 230/250 volts grade single pole ISI marked fixed in replacement, complete all as specified and as directed by engineer in charge. Make : Havells REO Ordering code : AHELEXW000/ ANCHOR

S&F in repair Modular fan step regulator 120W 02 module including taking down unserviceable one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/ Havells

S&F in repair Modular switch 01 way 06A, 01 module including taking down unserviceable one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular switch 01 way 16A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular bell push flush type 6A, 01 module including taking down unserviceble one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A-2/3 pin, 02 module including taking down unserviceable one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells

S&F in repair Modular socket, 6A/16A-2/3 pin, 02 module including taking down unserviceable one all as specified and as directed by engineer in charge. Make : Legrand or equivalent to Schnider/Havells

Fixing only LED tube light fittings of 5w/12W/20W/2'x2' panel light anf LED bulk head fitting 9W as obtained from Srl item No-02 above complete with all a fixing accessories.

S&F in repair LED light fitting with high out put diffuser 1 feet, 5 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by engineer in charge. Make-C&G Cat Pt- NO-CCS-103-05-65-SLDP-NWH,Havells,Wipro

S&F in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 /12 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer in Charge. Havells Cat pt No - LHEXACP7IN1W010,Wipro

S&F in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by engineer in charge.Make-Havells Cat pt No - LHEXAWP7IN1W020,Wipro

S&F in repair LED Bulk head (6500K) fitting of 09/10 Watt surface mounting type extruded aluminium body with diffuser complete with testing all as specified and directed by engineer in charge.

S&F in repair surface/recessed mounting LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by engineer in charge. .Make -Crompton & Greaves,Model-Vector-VIIR,Cat Pt NoLCTLRF7-36-CDL,Havell & wipro

S&F in repair decorative wall light fixture made up of polycarbonate, suitable for 9W LED (B-22 base) complete with LED all as specified and as directed by engineer-in -charge

Sub main wiring with two run single core 4 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & capping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable sub main of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 4 sqmm and one run 4 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 6 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable sub main of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 6 sqmm and one run 6 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 1.5 sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100V grade including 25mm dia in PVC concealed conduit/PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.5 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable sub main of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 1.5 sqmm and one run1.5 sqmm cable and one run of PVC conduit shall be measured as one RM

Sub main wiring with two run single core 2.5 sqmm FRLS copper conductor cable PVC insulated, 1100V grade including 25mm dia in PVC casing & caping medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 2.5 sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board complete including taking down unserviceable sub main of any type/size and testing on completion etc fixed in replacement, complete all as specified and directed by engineer-in-charge. Note : Two run of 2.5 sqmm and one run2.5 sqmm cable and one run of PVC casing and capping shall be measured as one RM

Fixing only serviceable MCB DB of any type and capacity obtained from Item No 03 complete all as specified and directed by Engineer in Charge.

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 8 Way all as specified and directed by engineer in charge. Make : C&S Cat No:CSDBSPNDD08/ Standard Cat No: DSDNSHODXW08/ Indo Asian Cat No : 810321

S&F in replacement single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar neutral link Earth bar and din rail suitable for use on 240V, 50Hz supply double door SPN DB system 12 Way all as specified and directed by engineer in charge. Make : C&S Cat No:CSDBSPNDD12/ Standard Cat No: DSDNSHODXW12/ Indo Asian Cat No : 810323

Supply and fix VTPN MCCB Double door Distribution Board 04 way 415 volts grade IP 43 Protection Grade with provision for (MCCB) as incoming and Three/single phase (TP/SP) outgoings, complete with insulated bus bar arrangement fixed flush to wall complete including connections should be provide with necessary reducer lugs all as specified and directed by Engr-in-charge. Make : C&S Cat No:CSDBMCCB100DD04IP43S/ Standard Cat No: DSDLVDRBAOFO04/ Indo Asian Cat No : 811888

S & F in repair Thermal magnetic MCCB 4 pole 63 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB. Make C&S Cat No: CSC2N4/ Indo Asian Cat No: 830022/ or equivalent makes to Standard

S & F in repair thermal magnetic MCCB 4 pole 100 Amps 415 Volts 16 ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB.Make C&S Cat No: CSC2N4/ Indo Asian Cat No: 830022/ or equivalent makes to Standard

S & F in repair Thermal magnetic MCCB 4 pole 125/160 Amps 415 Volts 16ka INCLUDING MAKING NECESSARY ARRANGEMENT all as specified and directed by engineer in charge for MCCB DB. Make C&S Cat No: CS3A4/ Indo Asian Cat No: 830095 / or equivalent makes to Standard

S&F in repair connection and testing 'C' series SPN MCB 40 to 63 Amp 240V, 50Hz, 10kA for lighting and other domestic loads incl necessary copper lugs etc all as specified and as directed by Engineer in Charge. Make C&S Cat No: CSMBS2C40/ Indo Asian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP 6-32 Amps. Make C&S Cat No: CSMBS1C6 to CSMBS1C32/ Indo Asian Cat No: 810078/ or equivalent makes to Standard

S&F in repair 'C' series MCB SP 40 Amps. Make C&S Cat No: CSMBS1C40/ IndoAsian Cat No: 810060/ or equivalent makes to Standard

Fixing only serviceable MCB SPN/SP any capacity obtained from item no 03 as above all as specified and as directed by engineer in charge.

Supply and fixing LED street light fitting 25/35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as directed.

S&F in repair surface/recessed mounting LED down lighter round/square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge. Make -Crompton & Greaves, Model Pearl -R or Proxima-S CAt Pt No-CDR-208-12-30SL-NWH,Havell & Wipro

S&F in repair surface/recessed mounting LED down lighter round/square shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-charge Engr-in-Charge. Make -Crompton & Greaves, Model Pearl -R or Proxima-S CAt Pt No-CDR-208-15-30SL-NWH,Havell & Wipro

S&F in repair for MCB TPN 63 Amp, 415 Volts- C curve of 10kA Make : C&S Cat No: CSMBS3C63N/ IndoAsian Cat No 810098/ Havells

S&F in repair Metal clad Plug socket single pole enclosure with two pin earth plug and socket with one single 20 Amp , 240 volts MCB complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement PVC insulated single core copper conductor of 1.5 sqmm .

Supply and fixing in replacement PVC insulated single core copper conductor of 2.5 sqmm .

S & F ( in replacement) Electrical PVC round plate cover complete all as specified and directed

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 200x150mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by engineer in charge.

S&F in repair 3 mm thick plastic laminated ebonite sheet cover of size 250x200mm including cutting /finishing or making hole for mounting of switches, sockets, regulators etc all as specified and as directed by engineer in charge.

M&L for disconnecting all Electrical connection from MCB DB TPN/Wall Mounted Panel Box for reconnecting the same with providing proper Copper Bottle Lugs of suitable size and removing the burnt out internal wiring of DB/Panel complete with providing PVC Flexible conduit for Hanging wire complete all as specified and directed by engineer in charge. Note : Replacement Burnt out MCBs of any type/size may be measured and paid separately under relevant Items

Taking down/removing existing damaged cable connection from MCB DB/Wall Mounted Panel Board by making cutting chases on wall/ floor to extend the shorten UG cable of any type/size from Loop and making fresh to reconnect the same with suitable aluminium lugs complete including distribute the load equally on each phase all as specified and directed by Engineer in charge. Note : Cutting of Wall /Floor shall be measured and paid separately.

Supply &fix in replacement modular metal flux box 3 module complete all as specified and directed.

Supply &fix in replacement modular metal flux box 6 module complete all as specified and directed.

Supply &fix in replacement modular metal flux box 4 module complete all as specified and directed.

M&L Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No-3 of MES Part-1 fixed in replacement including testing on completion including the material and labour of the following :- (a) Excavation and earth work for drilling hole for electrode in any type of soil. (b) PCC Pit in cement concrete 1:2:4 type B-1. (c) Precast RCC cover with suitable handle 40mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than 1.87 Kg/Sqm. (d) Funnel with watering pipe of GI protection pipe 5 mtr long for protection of earthing lead from mechanical injury or tempering. (f) Requisite quantity of common salt and charcoal. (g) Testing of Earthing. Note : (a) On testing after completion of earthing, if the desired earth resistance is not obtained, the earthing will be done by the contractor at his own risk and cost to the entire satisfaction ot the Engineer in Charge. (b) The contractor shall quote his rate considering taking down cost of existing unserviceable earthing.

M/S IMTESH BHAT

KUMAR CONSTRUCTION CO