Special Repair to Chenab Hostel of Sainik School Sujanpur Tihra

Amount

Demolition of stone masonry above Ground level upto all floor level including stacking of serviceable materials and disposal of un-serviceable materials within all lead as per the direction of Engineer-in-Charge including entire carriage of material within all leads , lifts and other incidents .

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all as per the direction of Engineer-in-Charge including entire carriage of material within all leads , lifts and other incidents .

Dismantling ballies in posts,purlins or rafters including stacking the materials with in all leads as per the direction of Engineer-in-Charge.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials within all leads (Frame work such as joists, beams to be measured and paid for separately) as per the direction of Engineer-in-Charge including entire carriage of materials in all leads.

Squared rubble masonry coursed with hard stone of approved quality in super structure including raking out joints in cement mortar 1:3 ( one cement: three sand ) as per the direction of Engineer-in-Charge including entire carriage of materials in all leads and lifts .The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimetre) so as to give a smooth finish including centring, shuttering, strutting, propping and centring with wooden battens and ballies fo all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work In Vertical surfaces such as walls any thickness partitions and the like including attached pillasters, buttresses, plinth and string courses and the like. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and laying cement concrete machinacally mixed vibrated and work 1:2:4 one cement : two sand : four graded crushed stone aggregate) 20mm(twenty millimeters nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floor roofs , landing and shelves and their supports balconies , beams ,girders,bressumers and cantilever upto floor two level as per the direction of Engineer-in-Charge including entire carriage of material within all leads , lifts and other incidents . The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing tor steel reinforcement (TATA/SAIL) for reinforcement cement concrete work including bending, binding, straightening and placing in position including the cost of binding wire complete upto all floor level in all heights including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive GST, royality and sale tax imposed by the Government.

Repair to plaster in patches of 2.50 sqm (Two point five zero square metre) and under and 10 to 15mm (Ten to fifteen milimetres) thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubbish to the dumping ground within all leads in cement mortar 1:4 (One cement : Four coarse sand) as per direction of Engineer-in-Charge including entire carriage of materials in all leads and lifts and other incidents.

Pointing on square rubble,coursed or un-coursed stone masonry with cement mortar 1:3 (one cement:three coarse Sand) flush pointing as per direction of Engineer-in-Charge including entire carriage of material with in all leads and lifts and other incidentals.

Providing and fixing glass panes with putty and nails including removal of broken glass panes whereever necessary,plain glass 5.5 mm (five point five millimeter) thick as direction of Engineer-in-Charge including entire carriage of materials with in all leads and lifts and and other incidents. The rates are inclusive GST, royality and sale tax imposed by the Government.

Steel work welded in built up sections (TATA/SAIL Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint upto all floor level in all heights In beams,joists, channels,angles,tees,flats with connectinng plates or angle cleats as in main and cross beams, hip and jack raftres, purlins connected to common rafters and the like works as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and fixing 0.60mm (Zero point sixty millimetres) thick prepainted steel sheet roofing over steel trusses TATA/Durashine Make. Prepainted single skin trapezoidal profile sheeting 0.60mm (Zero point sixty millimetre height) having 1060mm (One thousand sixty millimetres) cover width (overall width 1126mm (One thousand one hundred twenty six millimetres) 28mm (Twenty eight millimetres) crest depth at 353+2 centre to centre crest distance. There will be two ribs at the center for stiffening having depth of 2.5mm (Two point five millimetres). The main crest width at top of 25mm (Twenty five millimetres) and at the lower 81mm (Eighty one millimetres) base metal of cold rolled steel coil with zinc coating. Top coat with regular modified polyester coating of approved shade and balancing reverse coat with polyster paint. Fixing of sheet shall be with self drilling and self tapping screws of size 5.5mm (Five point five millimetres) dia 5.5mm (Five point five millimetres) length with EDPMC seal. The material supply will be accompanied by test certificate and 20 years warranty from company against corrosion fading of colour and manufacturing defects. The shade and sample of prepainted sheet shall be got approved from the Engineer-in-Charge with all accessories as required and as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and fixing ridges or hips 60cm (Sixty centimetres) overall with 0.60mm) Zero point six zero millimetres) thick prepainted steel sheets TATA/Durashine Make in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetres) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and fixing valleys 60cm (Sixty centimetres) (overall 0.60mm (Zero point six zero millimetres) thick prepainted steel sheet TATA/Durashine Make in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (Six millimetres) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required in all heights as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and fixing MS BP Sheet 1.66mm to 2.00mm (One point sixty six to two millimetre) thick TATA/Durashine Make in eaves board, facia, soffits, ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing and fixing plain asbestos sheet lining with butt jointing and wood screws (frame work and cover) fillets to be measured and paid for separately) 6mm ( Six millimetre ) thick (Bison Board) complete as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Painting two coats (excluding priming coat made of Asian paints /Nerolac paints ) on new steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with enamel paint other than white as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and ncluding preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer (ASAIN/NEROLAC ) complete as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with Paint other than white (ASAIN/NEROLAC ) complete as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Distempering two coats with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture ( ASAIN/NEROLAC ) after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and coarse sand papered smooth priming coat with distemper primer as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

Providing gola in lime concrete with 25 mm ( Twenty five millimetre) nominal size stone/ brick aggregate and 50% (Fifty percentage) of lime mortar 1:2 (one lime putty :two surkhi ) under the drip course and finished with lime plaster 1:2 (one lime putty:two surkhi ) complete as per direction of Engineer in Charge in all heights including entire carriage of materials in all leads and lifts and and other incidentals. The rates are inclusive GST, royality and sale tax imposed by the Government.

VIVEK GUPTA