Repair of CTR from RCM siding to Bachra petrol pump under Ashok OCP.

Amount

Excavation in soil using Hydraulic excavator CK 90 and Tippers with disposal upto 1000 mtr. ( excavation for roadwork in soil with hydarulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankement location within all lifts and lead upto 1000M ) including royalty @ Rs. 24.00 per cum but excluding the cost of watering rolling & compaction.

Dismantling of cement concrete Pavement ( Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking of pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 mtr, stacking serviceable and unserviceable materials separately.

Cement concrete pavement ( Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in abatching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished ina continous operation including provision of contraction, expansion, construction and longitudinal joints filler, separation, membrance, sealant primer, joint sealant , debonding strip, dowel bar, tie rod, admixtures as approved , curing compaound finishing to line and grades as per drawing.)

Carraiage of materials by mechanical transport including loading unloading, and stacking earth upto 1 Km.

Granular sub base with cloase graded material ( Table : -400-1) plant mix method ( Construction of granular sub base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed materials to work sitr, spreading in uniform layers ewith motor grader on prepared surface and compacting with vibratory power roller to achieve the desired, complete as per clause 401) for grading _ material.

Total impact of GST for the purpose of CTC