ADDITION ALTERATION TO BAR ROOM IN OFFICER MESS AT COAST GUARD UNDER GE HADDO SRI VIJAYA PURAM

Amount

Dismantling of ceiling boards including grid of any description fixed in any position with nails or screws etc all as specified and as directed.

M & L for seamless false ceiling made out of 12mm thick of gypsum board fixed to the ceiling section with 25mm long self drilling and tapping screws having Philips head with under head cutter at 200mm centre to centre, including finishing the joints of face board with specially formulated joining compound and 48 mm wide fibre tape to provide seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long including thin layer of Pop with Gypsum binder, sanding the surfaces till smooth surface is obtained and finally applying two coats of acrylic emulsion over one coat primer over 3mm thick putty all as specified and as directed

Hacking out old broken glass (any thickness, size, quality or description) from pvc/upvc frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S&F 5mm thick plain Saint Gobain Reflective glass ordinary quality and glazing with aluminum glazing clip and required neoprene rubber fixed to existing upvc window of size exc 0.5 Sqm in each pane etc all as specified and as directed.

M&L for 18-19mm thick Decorative choice prelaminated HDF boards (fire & water proof) of as in CB, cabinet, shelves etc & the like etc complete all as specified and as directed. Note: Shade of board will be finillized by Engr-In-Charge.

S&F Powder coated Aluminium sliding track double channels (Heavy duty) with roller arrangements suitable for cub boards or for sliding glasses etc complete all as specified and as directed.

Taking down chowkats or frames (Without taking of shutters) exceeding 1.5 and not exc 4 Sqm each all as directed.

S&F plain solid straight chowkats of rubber wood (Rubco wood) frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified .

S&F plain, framed, panelled shutters with 24 mm thick panels of rubber wood panels, thickness of battens 35mm, using superior quality chemically treated edge glued, finger jointed rubber wood duly finished with two coats of normal colour melamine polish over one coat of natural colour wood filler putty etc including preparing with sand paper etc and finishing to match with the adjoining interior. Make of rubber wood members: RUBCO or equivalent

S&F Brass barrel tower bolt, with cast or sheet barrel and rolled or cast bolts 200mm long and fixed. complete all as specified and as directed.

S&F Brass sliding door bolt 300mm long with sand or die cast brass hasp staples (bolt type) and fixing bolt with rolled or drawn brass bolts (dia of bolt not less than 16 mm) and fixed complete all as specified and as directed.

S&F 100 mm butt hinges extruded brass, with mild steel hinge pin, bright polished, type B-1 complete all as specified and as directed.

S&F 150 mm size brass handles, fabricated type polished.

S&F floor door stopper of brass body and tongue with hard drawn steel spring overall length of cover plate150mm. complete all as specified and as directed.

S&F brass body 4 levers vertical / round type mortice night latch of size 100 mm complete all as specified and as directed.

S&F 2nd class Hardwood Plain, solid, straight chowkats for decorative hand made works in Bar counter or in simillar works in semi-circular, worked from the solid in two or more sectors, dowelled and keyed with and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 10mm thick Toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes as required and fixed to position etc complete all as specified and as directed.

M&L 18 to 20mm thick granite stone (of any type ) work (table rubbed and polished) in counter, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including cutting to desired shape as reqd, Rounding, grinding and mirror polishing complete. (Note : Colour of granite shall be as approved by Engr-In-Charge)

S&F Auto concealed Cabinet Hinges, full overlay of size 103 x 64mm etc all as specified and as directed.

S&F Fancy 'D' Type Brass Drawer / Cabinet handles of Size 100mm, etc all as specified and as dierected.

S&F Magnetic catcher with plate, glossy finish for Drawer / Cabinet of Size not less than 50mm, etc all as specified and as dierected.

S&F Heavy duty Telescopic Steel channels 20 inches in length suitable for cub board, drawers and in simillar works etc all as specified and as directed

S&F Drawer lock (Appx size 52x46x39mm) with 02 nos keys suitable for cub board, drawers and in simillar works etc all as specified and as directed

S&F stainless steel tubing of any diameter of circular, square or rectangular in shape of grade AISI-316 (type Austenitic anticorrosive in nature) as in railings / grills / designer work including post top cap, bottom plate, cutting, bending, seamless welding and fixing in any type of location etc complete all as specified and as directed.

M&L for PU polishing on newly treated wooden surfaces of any description width or girth including cleaning and sanding with sand paper etc complete all as specified and as directed

M&L in repairs to 18 mm thick rubco huat rubwood in built up interiors as in cupboards, shelves wall lining, box structure and including all fitting items complete all as specified and directed. After completing the carpentry works all the visible woods area will be sanding by No.60 & 80 Wood Sanding Paper, after that will be applying Sheenlac make Filler with mixing of NCD Thinner (Sheenlac make), then pasting Chock Putty in the shabby/nailing area which will be sanding with No.120 Sanding Paper, after that will applying Sealer of Sheenlac make and walnut colour stainer, then cutting with No. 320 Sand Paper, after completing the above process spray Melamine Polish of Berger/Sheenlac make then cutting with No.400 Sanding Paper. Finally applying Silicon make: Waxpol with soft Banyan Cloth for better shining/finishing. Make of rubber wood members: RUBCO or equivalent

M&L for 24 mm thick WPC (Wood-Plastic Composite) louvers as in false ceiling, seam less finish and including GI channel 0.55 mm thick with two unequal flanges of 20 to 30mm and web of 27 mm fixed to surrounding wall using nylon sleeve and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 215 mm each and web of 45 mm suspended from soffits at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.20mtr length) of 0.55 mm thick having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including 6mm thick GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flats 40x3 mm size long and expansion hold fasteners 12.5mm dia 40mm long etc complete all as specified and directed. Note: Design and Pattern will be finilized by the Engr In charge.

M&L for Preparation of Painted internal wall surface and fixing Texured / 3D design or simillar wall paper (waterproof & scratch proof) with self adhesive type or pasting with suitable adhesive to the wall surface etc complete all as specified and as directed Note: Design / Colour will be finilized by the Engr In charge.

M&L for 18mm thick wooden flooring using treated and kiln dried Teak/Maple wood planks of width 90mm to 115mm and in random length in tongue and grooved, fixed over the flooring / tiling surfaces laid over necessary cushon / sponges and fixed with suitable adhesive as per the manufacture's instructions and after completing the carpentry work, sanding & polishing to be done using PU / malamine polish etc all as specified and as directed.

M & L point wiring complete with 1100 volts grade, 1.5 sq.mm (nominal area), single core, FRLS PVC insulated ,unsheathed, multi stranded copper conductor cable drawn through and including medium grade, rigid , non-metallic PVC concealed/ surface conduit of size not less than 20 mm dia, with all necessary fittings, concealed in walls /roof/ floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth duly including suitable size of factory made fabricated MS sheet modular terminal box, flush mounting in the wall for mounting switches/switch socket combinations/ fan regulators etc., covered with suitable size of modular cover plates complete in making good the existing surface with existing colour coding as required at site including taking down old point wiring complete all as specified for the following :-

All as per item No 32 above but for One light/fan point controlled by one modular switch 6 Amps one way.

Description same as per Srl item No 32 above but two light points controlled by one switch 6 Amps one way.

All as per item No 32 above but for one modular 3 pin 6 Amp socket out let on independent board.

All as per item No 32 above but for one modular 3 pin 6 Amps switch socket on same Board .

All as per item No 32 above but for one bell point controlled by one modular bell push switch 6 Amps one way.

All as per item No.32 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 16 Amps socket out let on independent board.

S & F for switch modular type, 6 Amps 1 module, 230 volts AC circuit complete all as specified and directed.

S & F for socket outlet modular type 1 way 6 Amps, 3 pin, 230 volts AC circuit complete all as specified and directed.

S & F Socket outlet 2 in 1 modular type, 3 pin, 6 and 16, universal complete all as specified and directed.

S & F Switch modular type , single pole one way 16 amps complete all as specified and directed.

S & F modular bell push 6 Amps flush type 230v, 50Hz AC complete all as specified and directed.

S&F, Electric Bell, Ding dong type working on 230 volts AC supply complete all as specified and directed.

S & F in replacement of concealed cob/ spot LED light energy efficient of cap 4 watt (WH/WW/NW of colour) LED for low ceiling height applications round in shape, pressure die-cast aluminium housing, spring loaded clips for easy mounting complete all as directed. Make : Luker :- LCOB04 or equivalent to Havells /Philips /CG

Supply and fixing in repairs of Decorative ultra slim linear LED lighting fixture of 15 Watt recess mounted 220V , 50Hz with Aluminium housing ,environmental friendly energy efficient fitting recess mounted round/square in shape (Warm white/ white colour as per requirement of site complete) of light as required at site) complete all as specified and directed. Make - Philips Cat Part No : Dura Slim or equivalent make in CG/Havels. NOTE: The rate quoted deemed to include for any alterations required to existing false ceiling as per site condition for fixing light fitting.

Decscription all as otem No 40 above but 18 watt.

S & F in replacement of LED Strip light, 60 LED per metre, 24 watts with driver, 5 metre length, of any colour (WW/NW/CDL), including all fixing arrangment as per site requirement complete all as specified and as directed. The cradle is provided for monitoring purpose all as directed. Make: Philips Model: Skycove or equivalent to CG/ Havells

Supplying, fixing and testing Tube light fittings in repairs aluminium housing, Diffuser slim Integrated design LED 21 watts 4 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED22S or equivalent to CG/ Havells/ Luker

Supplying, fixing and testing Tube light fittings in repairs aluminium housing, Diffuser slim Integrated design LED 10 watts 2 feet, IP-20 including all accessories and fixing arrangements for fixing the light fitting complete all as specified and directed. Make: Philips Cat Part No : BN021C LED12S or equivalent to CG/ Havells/ Luker

S & F BLDC 5 star rated ceiling fan metallic body ISI marked 1200 mm sweep, 220V AC, 50 Hz with all accessories alogwith providing and connecting up with 1.0 sqmm 3 core flexible copper conductor of suitable length from connector of fan to ceiling rose and testing complete all as specified and as directed by Engr In charge. Make: CG Model No : ENERGION Riviera or equivalent. Make of Havells/ Orient/ Usha /Bajaj.

Supply and fixing and testing LED Picture light fitting of cap 12 watt , bronzne , Aluminium materials , size - 500 x 80 x 95 , 420lm , 3000k with all fixing arrangements all as specified and directed. Make-Havells cat no LHLDESAARANC020 or equivalent to Philips/ CG

S & F Sub main wiring with PVC insulated FRLS cable 2 runs single core 4 sq mm 1100 V grade with stranded copper conductor cable using proper colour coding Phase Red /Yellow /Blue, Neutral- black and earth- green in and incl rigid PVC concealed conduit of suitable size (ISI marked) incl all specials/ accessories etc and provision of PVC insulated FRLS copper conductor single core 4.0 sq mm for earth continuity including taking down old sub main wiring all as directed. Note : 3 length of cable and one length PVC Conduit shall be measured and paid for one length.

Description same as per item Sl No 47 above but sub main wiring with 2 single core 6.0 sqmm duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire. Note for item No 47 & 48 : 3 length of cable and one length PVC Conduit shall be measured and paid for one length.

S & F SPN DB sheet metal enclosure double door suitable (IP-43) Protection 12 Way with 200 Amp rated standard bus bar of suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated complete.

Decscription all as item No 49 above but 8 way.

Supply & fixing MCB SPN 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed .

Supply & fixing MCB single pole, 6 to 32 Amps (`C’ series) having current rating 10 KA complete all as specified and directed. Note for item No 49 to 52:- All copper conductors should be connected with MCB alongwith copper reducer terminals of suitable size duly crimpled.”

Supply, install, test & commissioning of Split type air conditioner, 2.0 TR capacity, BEE 5-Star rating, having cord less remote control unit, wall mounted inverter type with built-in ioniser and plasama filter for better air quality, copper condenser, electric driven, single phase, 240 volts 50 Hz, AC supply including tranporting to site, fixing of indoor and outdoor units with necessary wall mounting brackets, necessary copper piping connections, cutting, bending, brazing, proper insulation on copper pipe and all other pipes, PVC drain pipe upto ground level, installation complete with all accessories including connecting electrically between indoor and outdoor units with suitable size of PVC insulated multistranded copper conductor, complete all as specified and as directed. MAKE : Blue star model IC524 DNU / Hitachi / Daikin. NOTE : 1.All connected pipes shall be measured and paid separately. 2. The drain out water pipe connection should be connected upto ground level.

Supply and fixing of starter switch of capacity 25 amps, working on 240 volts AC supply, suitable for air conditioner. Make: (Crabtree : Cat part No. ACT0252504 / or equivalent in Anchor / Standard.

Supply and fixing Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of 2.5% and of capacity 5 KVA. completge all as specified and directed.

CARTWHEEL CONSTRUCTION (BID ID -3280760)

Sree Tirumala Enterprises (BID ID -3281066)

LOOK UP ENTERPRISES (BID ID -3281090)

M/s Prem Enterprise (BID ID -3281390)

NAWAZ CONSTRUCTIONS (BID ID -3282157)

CHANDER SEKER ENTERPRISE (BID ID -3280845)

V KARTHICK (BID ID -3281103)