REPAIR TO CERTAIN ROADS AT DOMESTIC AREA AT 8 FBSU AF STN AWANTIPUR

Amount

Material and labour for repair to potholes any depth, exc. 30m each including sweeping free from dust and mud, or water, scoring sunken surface in roads, paths, etc. making good by applying tack coat 5 kg/10 sqm putting in premix bitumen macadam, well rammed and sealed with binder 8.9kg/10 sqm, blind with 0.09 cum of stone Chippings, 6.3mm size and again well rammed etc complete all as specified and directed.

Material and labour for preparing existing black top surface using mechanical brooms and removing the dust/foreign particules/caked mud including scrapping off paints of any description by using suction in built to the mechanical brooms and finally fanning the cleaned surface by gunny bags to remove all loose dirt etc complete all as specified and directed.

Material and labour applying evenly a tack coat with VG-30 grade paving bitumen @ 5.00 Kg per 10 Sqm with the help of Mechanical Sprayer over the old bituminous surface complete all as specified and directed.

All as per item No 3 above but @ 2.50 Kg of paving bitumen per 10 Sqm over newly laid BM Surface.

Material and labour for 75mm consolidated thickness premix bitumen macadam with 4% binder content by the wt of total mix of VG-30 grade bitumen paving bitumen any penetration laid, rolled and compacted to required gradient and camber with 8 to 10 tone power rolled (Consolidated thickness 75mm or less and compacted thickness 50mm) complete all as specified and directed.

Material and labour for 40mm thick compacted thickness Bituminous premix asphaltic semi dense concrete using 5.5% binder content by the wt of total mix of VG-30 grade paving bitumen paving bitumen any penetration, laid using mechanical pavers and vibratory rollers of appropriate specifications, spread rolled and consolidated to required gradient and camber complete all as specified and directed. Note for SI item No 6 above:- The bitumen binder shall be added as per ix design. The contractor shall have no claim if the bitumen content worked out in the mix design is more than 5.5% by weight of the total mix. However deduction shall be made if less bitumen is used than specified in CA provision.

Material and labour for preparing bituminous surface of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n.exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as specified and directed.

M/s Gh Qadir and Sons (BID ID -3083896)

M/S LATIF AHMED MIR (BID ID -3084865)

M/S GEE EMM MIR (BID ID -3094919)

M/S FEROZ AHMED MIR (BID ID -3090627)