PROVN OF MODULAR KITCHEN IN SNCO MESS, SINGNAL SQUARE AND LANDING TEE NEAR NEW ATC BUILDING AND SECURITY GATE IN BLDG NO. P-167 AT AF STN DARBHANGA UNDER GE AF BIHTA

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil & spreading in surrounding area n exc 50 m distance complete, all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in SOFT/LOOSE soil complete, all as specified.

Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

Broken stone hardcore of gauge exc. 63 mm but not exc 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete, all as specified.

Removal of excavated surplus spoil to a distance n. exc. 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified.

PCC type D-2 (1:4:8), using 40 mm graded stone aggregates as in filling, mass concrete, complete all as specified.

Reinforced cement concrete type A-1 (1:1.5:3), using 20 mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:4), complete all as specified.

Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.

Brick work using bricks as specified in PS-II clause 5.1, straight or curved on plan any radius in half brick thick wall built in cement mortar (1:4), complete all as specified.

Cutting chases on concrete surface / floor n exc 10cm girth, pining in making good to facing where required and pointing in cement mortar 1:3 at cills, landings, steps etc and making good complete, all as specified.

Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) with rough finished surfaces of concrete, complete all as specified.

Use & waste of formwork to edges of concrete flats, treads, breaks in floors, window cill, concrete railings, opening in concrete walls, floor and roof n exc 20cm wide and sides of RCC / PCC bands in walls horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finish, complete all as specified.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel TMT bars 6-8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified.

MS steel plain black sheet 1.60 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivers and fixed to wood or steel farming with plain 40 mm lap joints with riveted or welded seams, inlcluding beding or turning up , mitred angles , etc as required complete all as specified.

Mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to grade Fe-410-Gde E-250, quality A, complete all as specified.

Mild steel plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes without any attachment etc. confirming to grade Fe-410-Gde E-250, quality A complete all as specified.

Stainless steel caster wheel size (100 x 40 mm ) in landing tee and fixed to steel frame with bolting or welded seam etc as required complete all as specified.

Collapsible steel gate, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified erected in position and securing runnerrs with holdfasts and brackets, complete which include fixing to both new or old work and shall be done with a mix of concrete all as directed by Engg-in-Charge Note - This rate includes the rate of cutting/ chases of brick or concrete surface as per site requirement.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm of any colour hving tensile strength of 550 Mpa as in roof coverng/ cladding to wall, fixed with self tapping screws comlete all as specified.

25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.

100 mm thick, cement concrete type B-2, 1:2:4 using 40 mm graded stone aggregate, finished rough, as in sub floors or similar locations like path including spike rolling to surfaces or making impression of expanded metal whist the concrete green , complete all as specified.

Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified.

Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.36 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed in grout of matching shade, laid over and including 15 mm thick bedding layer in cement mortar (1:4), complete all as specified.

Vitrified ceramic, double charged tiles 7-8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.36 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified.

Machine cut Kota stone slab flooring 18-22 mm thick, area of each slab not less than 0.30 sq.m, (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed and jointed with grey cement slurry mixed with matching shade pigment including rubbing and polishing (Granite finish) complete, all as specified.

Rendering 5 mm thick on RCC or similar surfaces, finished even and smooth on ceilings in cement mortar (1:3), complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), complete all as specified.

Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4complete all as specified.

Two coats of cement base paint on new plastered wall surfaces, including preparation of surfaces, complete all as specified.

Three coats of white wash on new plastered ceiling surfaces, including preparation of surfaces, complete all as specified.

One coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified.

One coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified.

One coat of interior acrylic distemper (white / tinted) of old wall surfaces including prepration of surfaces complete, all as specified.

Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of interior primer.

Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces with sand papers/ mechanized sanding etc., (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.

Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over and including a coat of water based exterior primer.

12mm thick toughned glass for bar counter, partitions automatic doors and similar works including cutting to shape, drilling holes required complete all as specified.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.

Two coats of synthetic enamel paint over & including a coat primer paint over concrete surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified.

Stainless steel (SS-304) sink made out of 1.00mm thick sheet for kitchen or laboratory with plug waste pipe washers including cantilever cast iron brackets connecting union etc overall size 940mm x 460mm x 229 mm with bowl size 405mmx 354mm x 229mm, complete MAKE: PRAYAG Cat No.PSS-6 or equivalent make mentioned in Appendix 'B'

M&L Acrylic laminated Kitchen Cabinets (Custom made) of depth 19" to 24" using Plywoods as under:- (i) Laminated BWP plywood for Box Section (18mm thick) Make - KITPLY/CENTURY/ARCHID PLY/GREEN PLY (ii) Acrylic Laminated BWP plywood for Cabinet Shutters (18mm thick) Make - KITPLY/CENTURY/ARCHID PLY/GREEN PLY (iii) Laminated BWP plywood for Bakc Board of cabinet (12mm thick) Make - KITPLY/CENTURY/ARCHID PLY/GREEN PLY (iv) Acrylic laminated Glossy Sheet finish for Shutters (0.9 to 1.2mm thick) Make - SUNMICA/SUN GLOSS/GREEN LAM/ KITLAM/NOVAPAN Cut and factory fabricated including edging and lipping & fixed with screws for cabinet boxes and shutters purpose all as specified and as directed by Engineer-in-Charge. Adhesives - PIDILITE/FEVICOL/VERMICOL Note: for above two items (i) Glass for cabinets will be measured and paid separately as supply only item. (ii) Area calculated for payment will be measured in Length and breadth from frontal side of cabinet. (iii) Laminating incl lipping shall be Factory fabricated and finished. iv) Rate includes M&L racks, soft closing side/ bottom telescope drawer channels tracks for drawers & soft closing modular hinges and magnetic catcher. Make - HETTICH/HARDWIN/DYNA/GODREJ (v) Rate include M&L fitting of 4 nos modular SS plate racks, 4 nos plaint racks, 1no. oil racks & 1no. cutlery rack per kitchen. (vi)Rate includes M&L Aluminium powder coated handle profile section for shutters as approved Note - The work against this item shall be executed in kitchens of SNCOs Mess. The contractor shall record measurements for each kitchen seperately as per site and as directed by Engineer -in-Charge.

Acrylic laminated TV and Bar counter (Custom made) of depth 15" to 18" using Plywoods as under:- (i) Laminated BWP plywood for Box Section (18mm thick) Make - KITPLY/ CENTURY/ ARCHID PLY/GREEN PLY (ii) Acrylic laminated BWP plywood for Cabinet Shutters (18mm thick) (ii) Laminated BWP plywood for Back Board of cabinet (12mm thick) Make - KITPLY/CENTURY/ARCHID PLY/GREEN PLY (iv) Acrylic laminatd Glossy Sheet Finish for Shutters (0.9 to 1.2mm thick) Make:- SUNMICA/SUN GLOSS/GREEN LAM/KTILAM/ NOVAPAN (v) Rack soft closing site / bottom telescopic drawer channel tracks for drawer and soft closing modular hinges. Make:- Hettich / Hard wind / Dyna / Godrej Rate also included aluminium powder coated handles & magnetic catchers. Cut and factory fabricated including edging and lipping & fixing with screws for cabinet boxes and shutters purpose all as specified and as directed by Engineer-in-Charge.

Kitchen chimeny 90cm air suction capacity 1400, 50m3 / hr intelligent auto clean touch control with wave sensor LED lamp 2x1.5 watts motor power 1x80 watts noise level-58db total power 233 watts complete.

Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified

Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.