C/o Mini Secretariat building at Nadaun, Tehsil Nadaun, District Hamirpur (HP) (SH- SITC Wet Riser, Ring Main and Sprinkler System of Fire Fighting System therein

Amount

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 450 mm in diameter and 2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required.

Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required.MAKE:-TATA/JINDAL

Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty water hose thermoplastic (Textile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A')Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Providing, fixing of 63 mm dia,15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling(IS 903).Make:MINIMAX/TYCO/ CEASEFIRE/ NEWAGE

Providing & fixing 63 mm dia Gun metal Branch pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903.Make:MINIMAX/TYCO/CEASEFIRE/ NEWAGE

Providing &fixing fibre glass reinforced Fire Hose Cabinet( 30"x24"x10") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words" Hose Cabinet" on the Box complete as requried. Make:MINIMAX/TYCO /CEASEFIRE/NEWAGE

Providing fixing,testing and commissioning of 15mmdia chorme furnished sprinkler head with quartz type bulb, set to opreate at 68 degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed)Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support complete in all respect.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Four way

Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm.Make:SANT/ZOLOTO/LEADER

80 mm Dia

100 mm Dia

150 mm Dia

Providing and fixing Cast Cast Iron/steel double flanged horizontal type with gunmetal sheet non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table "E" and specifications complete in all respect.Make:SANT/ZOLOTO/LEADER

80 mm Dia

100 mm Dia

150 mm Dia

supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as requried.

SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect.

supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as requried.Make:SANT/ZOLOTO/LEADER

4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. Make:MINIMAX/TYCO/CEASEFIRE/NEWAGE

Providing and fixing Water CO2 9 .Litrs type fire extingushers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.Make:MINIMAX/ TYCO/CEASEFIRE/NEWAGE

Supply, Installation, Testing and Commissioning of electrical driven pump (meant for hydrants& sprinklers) suitable for automatic operations consisting of the following conforming to specifications attached. (A) Horizontal mounting, End Suction type single stage centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 2280 litres / minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) (Make of Pump:Make:KIRLOSKAR/CROMPTON/SIEMENS

(B) 60 HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor coupled with flexible coupling for the above pump suitable for 3 phase, 415 V +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325) (Make of Motor: M/s. Kirloskar frame size 225 or similar superior.

(C) Common bed plate for mounting pump and Moter fabricated of Moter fabricated of suitable of MS, channel as per manufactures recommendation.

(D) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads.

Diesel Driven Pump (Standby) : Supply, Installation, Testing and Commissioning of diesel engine driven main fire pump suitable for automatic operation consisting and including fuel tank ,12V 130 AH Battery, Engine oil , Coolant ,Diesel 200 liter Complete in all respect as req of the following, complete in all respect as required conforming to specifications attached. (A) Horizontal mounting, End Suction type single stage centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 2280 litres / minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520/9137) (Make of Pump: M/s. Kirloskar with Impeller or similar superior ). (B) 62 HP, 1500/1800 RPM water cooled with radiator, diesel engine conforming to relevant BS&IS standard complete with auto starting mechanism 12V/24 V electric starting equipment, with necessary battery as per manufacturer's requirement mounted on suitable stand, charging arrangement, exhaust pipe, residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc as required. (C) MS fabricated Common base plate, coupling guard, foundation bolts etc as required. (D) Fuel tank suitable for min 12 hrs running & its foundation, with one empty barrel suitable for 200 ltr diesel & 1 fuel hand pump with 5 mtr flexible hose i/c fuel piping (supply and return) with suitable wheel valve on supply line. (E) Insulation of the silencer and exhaust pipe inside the room with 50mm thick resin bonded glass wool covered with 1mm thick aluminium cladding with necessary supports. The exhaust pipe to be extended upto 1mtr outside the pump room with necessary rainwater cap etc. (F) Suitable cement concrete foundation of height 150 mm on the pump room floor with a minimum 100mm space all around the base frame with AVM pads and angle iron frame of size 30mm x 30mm x 3mm on the top edges of the foundation.Make:KIRLOSKAR/CROMPTON/SIEMENS

Jockey Pump (Wet Riser System) Supply, Installation, Testing and Commissioning of electrical driven jockey pump (meant for hydrants) suitable for automatic operations, consisting of the following, conforming to specifications attached. (A) Horizontal mounting, End Suction type centrifugal pump with cast iron body and bronze impeller with steel shaft of C-40 grade, capable of discharging 180 litres / minute of water at 70 metres head to give a pressure of not less than 3.5 Kg/Sq cm at topmost Hydrant point. (Confirming to IS-1520) (Make of Pump: M/s. Kirloskar Model CPHM 25/26A with Impeller similar superior .) (c) 15 HP Capacity Two pole totally enclosed fan cooled type squirrel cage A.C. induction motor suitable for 3 phase, 415 V +/-10%, 50 Hz +/- 5% A.C. supply, with IP 55 protection for enclosure, horizontal mounted type with 'F' class insulation (Confirming to IS-325) Make:KIRLOSKAR/CROMPTON/SIEMENS

Terrace Pump set Kirloskar Make pump in back pull out design (end suction type ) having 65 mm suction,40 mm delivery,CI casing ,bronze impeller and CS shaft with gland packing arrangement coupled on common baseplate tp kirloskar/ABB/CEL or equivalent (at our option ) make 5.5KW/7.5HP,2900RPM TEFC sq.cage induction motor suitable for 3 phase,415V,50Hz Ac Supply confirmimg to through suitable flexible coupling ,Total Head 35m,450LPM.Make:KIRLOSKAR/ CROMPTON/ SIEMENS

Fabricating ,Supplying, installation, testing and commissioning of cubical construction floor mounted type, fabricating from 2 mm thick CRCA sheet compartmentalised withhinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection, having swichgear and accessories mounting and internal wiring, earth terminal numbering etc complete in all respect suitable for operation on 415 V .Three Phase, 50 Hz, Ac supply withencloser protection class IP 42 as required.

Incomer

OUTING

Mains Fire pump.

iii)Pump on LED Induication Lamp -1 No

b) Jockey pump.

iii)Pump on LED Induication Lamp -1 No

Diesel Engine Control

Control for Diesel Engine Comprising

d) System Controller

Designing supply, Installation, Testing and Commissioning of system controller to control operation of Main Electric Pump, Diesel Pump, Pressurisation Pump, in Sequence as per specification consisting of relay, timers, sensors,annunciation window for fault indication, complete as per specification Make:-L&T/ABB/LEGRAND

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size.MAKE :-KEI/FINOLEX/HEVELLS

Armoured cable 50 sq. mm ( 3.5 core)

Armoured cable 95 sq. mm ( 3.5 core)

TARUN FIRE SYSTEM

AVINASH FIRE PROTECTION SYSTEM