Loading
Loading…
Loading…
Tender Value
₹1.2 Cr
EMD Value
₹2.4 L
Closing Date
13 Aug 2026, 9:30 pmClosed
Bangalore Electricity Supply Company Limited
Praveen M K
Construction of Second Floor to Doddaballapura Urban Sub - Division Office Building at BESCOM Premises, Doddaballapura
BESCOM/2026-27/BD/WORK_INDENT1160
BESCOM/2026-27/BD/WORK_INDENT1160
Open
Buildings
Two Tender Document System(Two Cover)
BESCOM Bangalore Rural Area Zone(BRAZ) Office Bengaluru
11 documents required · 11 mandatory
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The bidders shall furnish the work done certificate for having executed interior and development works of value not less than Rs. 78.39 lakhs and completed satisfactorily as a prime contractor within stipulated time period in the past 5 years (i.e., F/Y 2021-22 to 2025-26). Work done certificate shall be uploaded by the tenderer duly signed by the officer not below the rank of Executive Engineer or equivalent
KPWD Registration Certificate as per NIT and KW4
The bidders shall upload the work done certificate for minimum quantities of work executed in any one year, for following quantities in the last 5 years (i.e. F/Y 2021-22 to 2025-26) the certificate shall be issued by the officer not below the rank of Executive Engineer or equivalent.a.PCC/RCC - 128.00 Cum b.Solid block masonry/Burnt brick Masonry - 392.00 mt/91.00Cum c.TMT steel reinforcement - 17.00 Tonne d.Vitrified / Ceramic / Granite flooring - 575.00 Smt e.Plastering - 1500.00 Smt f.Mobile Rack Compactors - 16 Nos g.Lift (4 stops) - 1No
The bidder/tenderer or his identified Sub contractor should produce required valid electrical licence along with consent/undertaking letter for executing building electrification works and should have executed similar electrical works totalling for Rs. 12.35 lakhs in any one year in the past 5 years, (i.e., F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Electrical Works.
The bidder/tenderer or his identified Sub contractor should have executed similar Water supply / sanitary engineering works /PHE works totalling for Rs. 2.66 lakhs in any one year in the last 5 years, (i.e., F/Y 2021-22 to 2025-26) signed by the officer not below the rank of Executive Engineer or equivalent for Water Supply / Sanitary Engineering Works / PHE Works.
The bidders shall have achieved turnover for an amount not less than Rs. 313.54 lakhs achieved in any two financial years in the past 5 years (i.e., F/Y 2021-22 to 2025-26) (in all classes of civil engineering construction works only). The Turnover certificate along with Balance sheet and P & L statement of past 5 years for the Civil Engineering works only (i.e., F/Y 2021-22 to 2025-26) issued from a Registered Chartered Accountant (Registered Chartered Accountant PIN and UDIN number must be mentioned failing which bid will be considered as Non-Responsive) should be uploaded
The banker certificate pertaining to Liquid Assets for availability of fund requirement for the work not less Rs.47.05 Lakhs issued by Nationalised / Scheduled Bank for the subject work addressed to The Chief Engineer (Ele), BRAZ, BESCOM, BENGALURU after 29.07.2026 in the enclosed format.
₹3,920
₹2.4 L
29 Jul 2026
29 Jul 2026
14 Aug 2026
7 Aug 2026
5 Aug 2026
Construction of Second Floor to Doddaballapura Urban Sub - Division Office Building at BESCOM Premises, Doddaballapura
Demolishing stone rubble masonry manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of...
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of Eng...
Dismantling aluminium or Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate dispos...
Dismantling aluminium or Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate dispos...
Dismantling aluminium or Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material to the appropriate dispos...
Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-...
Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-...
Demolishing brick work manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-...
Demolishing cement concrete manually or by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.
For thickness of tiles 10 mm to 25m...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge.
For thickness of tiles 10 mm to 25m...
Demolishing R.C.C. work manually or by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge...
Disposal of building rubbish or malba or similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as...
Disposal of building rubbish or malba or similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as...
Disposal of building rubbish or malba or similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as...
Earth work in surface excavation by mechanical means for lowering and leveling the ground for all works other than foundation in all kinds of soils and upto depth not exceeding 300mm as per drawing an...
Earth work excavation for Foundation by mechanical means for all works and depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Concrete, Formwork and reinforcement
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates a...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in Cement Concrete for all Basement and surface level works, return walls, retaining walls, sunken floors etc. The granite or trap or basalt crushed graded coarse aggregates and ...
Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Foundation works. The granite or trap or basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The granite o...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping or welding joints, ...
Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg or Cum and minimum compressive strength of 4.00 N or mm2 conforming ...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elas...
Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead ...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitti...
Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shal...
Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the bu...
Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and ...
Extra for openable side or top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make suc...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc.
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door or window or Clerestory windows and other Frames or Chowkhat comprising of virgin PVC polymer of K value 58-6...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 300mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Aldrop 16mm dia, 200mm
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Handles 200mm
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Door stopper 75mm
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge
SS Tower Bolts 200x10mm
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 m...
Providing and Fixing Holdfast of size 260mm x 25mm x 5mm
Polyurethane based Single Component for New Surface
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace...
Polyurethane based Single Component for New Surface
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. Th...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...
Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge.
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 percent and conforming to I.S. 15622, of approved make, in all colours and shade, ov...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Extra for providing opening of required size and shape for wash basin or kitchen sink in kitchen platform, vanity counter and similar location in Granite, including necessary holes for pillar taps et...
Providing and fixing granite stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with c...
Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) greater than78, solar reflection greater than0.70 and initial emittance greater than0.75 o...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sanincluding rounding off corners wherever required smooth rendering, providing and removing ...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sanand a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ce...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removin...
Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3 fine sand) on concrete surface or ceilings including rounding off corners wherever required smooth rendering, providing and removin...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and fixing suitable plaster mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120g or m2 width, along route of walls chipped f...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams or litre of approved brand and manufacture, including applying ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: New ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: New ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: New ...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives with pure Acrylic Resin, UV resistant, dirt and pick up resistant, Alkali and Water resistant of required shade: New ...
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied at 1.67 l or 10 m²) on existing cement paint surface including preparing the surface after thoroug...
Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two coat applied at 1.67 l or 10 m²) on existing cement paint surface including preparing the surface after thoroug...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L or 10 m²) over and including priming coat of exterior primer applied at 2.20kg or 10 m² to ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L or 10 m²) over and including priming coat of exterior primer applied at 2.20kg or 10 m² to ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L or 10 m²) over and including priming coat of exterior primer applied at 2.20kg or 10 m² to ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 L or 10 m²) over and including priming coat of exterior primer applied at 2.20kg or 10 m² to ...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied at 3.28 l or 10 m² including preparing the surface after thoroughly clea...
Finishing walls with textured exterior paint of required shade :Old work (Two coats on existing cement paint surface applied at 3.28 l or 10 m² including preparing the surface after thoroughly clea...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr or 10 m² over an under coat of primer applied at 0.75 ltr or 10 m² of approved brand and manufac...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr or 10 m² over an under coat of primer applied at 0.75 ltr or 10 m² of approved brand and manufac...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied at 0.90 ltr or 10 m² over an under coat of primer applied at 0.75 ltr or 10 m² of approved brand and manufac...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Moblie storage:
5 BAY MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per...
Moblie storage:
5 BAY MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per...
Moblie storage:
5 BAY MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per...
Moblie storage:
5 BAY MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per...
Moblie storage:
5 BAY MOBILE RACK COMPACTOR
Providing, supplying and fixing of mobile rack compactor of approved make of following features complete including cost of material installation, etc as per...
MEDIUM BACK CHAIR
Supplying Black Medium Back Mesh chair of size 585mm(L)x585mm(W)x1040mm(H) with cushion seat and mesh back with cushion arms and nylon base with Pnuematic height adjustable system w...
EXECUTIVE CHAIR
Supplying Liberate High Back Mesh chair of size 660mm(L)x660mm(W)x1250mm(H) with cushion seat and mesh back with cushion arms and chrome plated metal base with Pnuematic height adjust...
Providing and fixing Gypsum false ceiling as per India Gypsum specification for ceiling with drops as per drawing including of providing and fixing aluminium Frame work as per specific...
Square open cell ceiling : supply of LD square make 100mmx100mm open cell ceiling system of 0.4 mm GI thickness and 40mm HT , U bend with U SiZe 8mmx 40x40 in Powder coated finish of approved shade (...
VENEER PANELLING
Providing and fixing 4mm thick Veneer of approved make fixed over 12 mm ply back support with melamine polishing wherever required on panelling surface complete including cost and con...
Providing and fixing storage unit made out of 19mm thick Approved commercial ply for shutters, sides, bottom, Compartments and Drawers finished with Acrylic laminate (Approved make and...
Window Blinds - Providing and Fixing Zebra blinds with dual layer of approved make, colour and design consists of ball chain operated mechanism, aluminium frame or channell including cost of material...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and r...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and r...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and r...
Concealed conduit System
Supplying heavy gauge PVC conduit pipe ……mm dia ......mm thick confirming to IS 2509 with suitable size bends, metals or PVC junction boxes, adhesives paste etc., and r...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying heavy gauge PVC conduit pipe……dia.....mm thick with suitable size bends, metal junction boxes, adhesive paste etc. By groove cutting in the wall and fixing by bracing U or J hooks and c...
Supplying and fixing PVC or metal conduit deep junction box.
a) 19 or 20mm deep junction box
Supplying and fixing PVC or metal conduit deep junction box.
b) 25mm deep junction box
Supplying and fixing PVC or metal conduit deep junction box.
c) 32mm deep junction box
Extra for Groove cutting in brick wall or cc floor to the suitable depth for concealing of Conduit or GI pipe and plastering, finishing the wall upto wall surface complete.
a) upto 50mm conduit in CC...
Supplying and fixing Metal fan box with round hook.
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm...
Point wiring using copper wire without switch.
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1.5Sqmm (Phase and Neutral) and 1 x1.0Sqmm...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with as per IS...
SWITCHES, SOCKETS and ACCESSORIES
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due g...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick or Stone or C...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
a) 6 Amps one way
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
b) 6 Amps Two way
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
c) 6Amps 3way socket...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
d) Stepped fan regul...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
e) 32A,DP,Switch
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
f) 16Amps one way sw...
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 and IS 1293
g) 6 or 16Amps unive...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross-3 with short circuit breaking...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross-3 with short circuit breaking...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON or OFF, energy cross-3 with short circuit breaking...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying and fixing regular MCB distribution boards on wall or wood board or flush mounting using required clamps, bolts ,nuts etc., with provision for fixing suitable type capacity MCB'S single ...
Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240 or 450V up to 300mA sensitivity on existing wood or panel Board.
a) 32-40Amps 2 pole
Supplying, fixing and wiring Residual Current Circuit Breaker [RCCB] 240 or 450V up to 300mA sensitivity on existing wood or panel Board.
b) 32-40Amps 4 pole
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron ….and M.S. flat with bolts, washers etc… and painted with 2 coats of red oxide and then two coats of approved paint.
L.T. U.G. CABLES AND EARTHING
Supplying fixing and wiring earth electrode for grounding of DG Sets etc. using 40mm dia 2.9mm thick 2.5mtr long GI pipe with GI funnel with mesh and suitable size reduc...
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
Supplying and running of GI or Copper strips for grounding connections, using necessary fixing materials as required.
b) 600x600x3mm GI Plate
Supplying and running GI or Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas or spacers etc..
Supply and laying of underfloor (concealed) or Above false ceiling raceways manufactured from 1.5 mm thick cover and base (including partitions for multicompartment raceways), zero spangle pre-galva...
upply and laying of under floor junction boxes shall be of three-piece construction Base box, frame and load plate. Base box shall be robust in its construction manufactured from 1.5 mm thick zero sp...
Supply, termination of Aluminium End Terminal (Lug)
a) 1.5 to 10 sq.mm
Fixing all types and all capacities fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23 or 0.00076 " twin twisted P...
Fixing a ceiling or wall mounting fan of all capacities and all types to the existing 'S' hook with fan regulator to the existing board together with supplying and fixing a 5 amps ceiling rose, necess...
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and a 5 amps, ceiling rose with sufficient length of 23 or 0.0076 inch PVC insulated twin core wire.
Using 2 Mtr long 19mm 18SWG enamelled braised conduit of two nos. rod pendent with ball socket with check nuts all nickel painted.
Extra length of GI pipe of class b 19mm dia for down rod.
FIRE EXTINGUISHERS - Supply and Providing 4.5Kg C02 Gas Type aluminium body Squeeze grip Fire Extinugisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight...
LED LUMINAIRS or LIGHT FIXTURES and ACCESSORIES AND FANS
Supplying and fixing of LED Bulkhead of 10W with IP65 protection and IK 08 impact resistance suitable for surface and wall mounting applica...
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 8. Power Input : 220-240V at ...
Supplying of 2' feet - LED PVC Square Batten …W with high quality diffuser with life of 25000 burning hours and 70 percent lumen maintenance with CRI greater than 8. Power Input : 220-240V at ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supply of round or square recess or surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector ...
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast or extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 d...
Supplying exhaust fan of 1440RPM heavy duty with bracket blades suitable to operate on 230V 50Hz, AC supply.. 12" sweep (300mm)
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374 or 79 and also comply with IS:1709 or 1984 with latest amendment, Rated voltage 220 V or 50 Hz, Rated p...
Supplying wall mounting fan suitable to operate at single phase 230v AC supply.
UPS, BATTERIES.
Supplying, erecting, testing and commissioning of ON-LINE UPS System suitable for operation on 415V Input and 415V, Output, 50Hz, A or C supply with Isolation Transformer all accessor...
Supplying, installation, testing and commissioning of 12volts DC AH Batteries in poly propylene container for UPS Low maintenance Tubular or smf batteries.
12V, 100 AH Capacity. Acid battery.
CAMERAS and ACCESSORIES
Supply, Installation, Testing and Commissioning of 1 or 3" progressive scan CMOS, 5.0 megapixel, IP based Colour camera, Up to 30 m IR range, Color: 0.01Lux, 1000TVL, Digit...
Supply, Installation, Testing and Commissioning of 8port 10 or 100 or 1000 Smart POE Switch with 4 SFP (192W)for camera connection including all necessary accessories.
Supply, Installation, Testing and Commissioning of NVR (Networkable Video Recorder) 8Channel NVR, Up to 8ch IP cameras input, Up to 5 Megapixels resolution recording, HDMI and VGA output at up to 1...
Supply, Installation, Testing and Commissioning of HDMI, 4K, Display Monitor 40" high resolution, Monitor with all mounting bracket accessories.
Supplying and drawing UTP-CAT 6 LAN cable.
NETWORKING AND COMMUNICATION :
Supplying and fixing of modular switch or Socket or stepped electronic fan regulator or dimmer or telephone socket etc. on existing modular switch plate as per IS 3854 a...
Supplying and drawing UTP-CAT 6 LAN cable.
Supplying and Drawing PVC flexible one pair telephone unarmoured tinned copper cable.
Supplying and fixing of switch mounting rack with power manager and cable manager.
6U with 450mm depth
Supplying and fixing of power strip.
Supplying and fixing of fan.
Supplying fixing of Network Switches.
24 Port Gigabyte (Manageable)
Supplying and fixing of ….mtrs Cat6 Patch Cable -
Supplying and fixing of ….mtrs Cat6 Patch Cable -
Supplying and fixing of Patch Panel for LAN cabling.
24 Port 10 or 100 or 1000 Patch Panel
Supplying and Fixing of MDF Krone junction box with KRONE module or Telephone cable termination.
Supply and laying 6 Core Multimode OCum outdoor Fiber Cable.
Design, supplying, erecting testing and commissioning of - passenger or Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or w...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the ...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings an...
Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with screws, fixing materials and sealant to all sides of wall flange complete.
Make : Jaquar, M...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing Single Lever Basin Mixer with 450mm long flexible connectors made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class
a. Class - Economy
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers compl...
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 g.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 110 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 110mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Providing and fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete..
Supplying and fixing PVC P' trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors.
Providing and fixing PTMT grating of approved quality and colour.
125 mm nominal dia
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pi...
25 mm dia pipe nominal OD pipes
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
25mm nominal bore
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing...
Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
20mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :
25mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :
32mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :
40mm nominal bore
Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :
50mm nominal bore
Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over f...
Supplying , fixing, testing and commissioning of PVC welded rain water head or khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC s...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark and with its latest amendments
Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834 or 1987 and fabricated as per IG124 or 1984 with ISI mark with its latest amendments
Providing and fixing Square mouth stone ware gully trap SP-1 Complete With CI Grating Brick Masonry Chamber 100x100mm Size P trap With Non modular common burnt bricks of designation 3.5, with wate...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Earth work excavation for pipelines or cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lig...
Providing and fixing gun metal non- return valve of approved quality
32 mm nominal bore
Providing and fixing gun metal non- return valve of approved quality
40 mm nominal bore
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BRAZ NIT 2026-27.docx
Instructions to Tenderers • 0.06 MB
KW4 Doddaballapura.docx
Tender Document • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .